Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-08-01 20:31:43
From: Brian Conway
Description: OpenBSD 6.0-release macppc Mac Mini G4, gutted wifi and bluetooth, rm radeon firmware
[ using 694220 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A] console in [], no keyboard attached, trying usb anyway
using parent ATY,RockHopper2Paren:: memaddr 98000000, size 8000000 : consaddr 9c008000 : ioaddr 90020000, size 20000: width 640 linebytes 768 height 480 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 6.0 (GENERIC) #0: Thu Jul 28 02:25:10 UTC 2016
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1028825088 (981MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac10,1
cpu0 at mainbus0: 7447A (Revision 0x102): 1416 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
agp at pchb0 not configured
radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01
drm0 at radeondrm0
radeondrm0: irq 48
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9: irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x0, 0% charged
piic0 at adb0
iic1 at piic0
maxtmp0 at iic1 addr 0xc8: max6642
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
audio0 at aoa0
ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
atapiscsi0 at wdc1 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-R UJ-835F, GGND> ATAPI 5/cdrom removable
cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address [_MAC_XXXXXXXXXX]
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk Ultra Fit" rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> SCSI4 0/direct removable serial.07815583380826114233
sd0: 14663MB, 512 bytes/sector, 30031250 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@f2000000/usb@1b/disk@1:/bsd
root on sd0a (bab4a249db188416.a) swap on sd0b dump on sd0b
WARNING: clock gained 3 days -- CHECK AND RESET THE DATE!
error: [drm:pid0:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
error: [drm:pid0:radeon_agp_init] *ERROR* Unable to acquire AGP: 22
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r200_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
hw.machine=macppc
hw.model=7447A (Revision 0x102)
hw.ncpu=1
hw.byteorder=4321
hw.pagesize=4096
hw.disknames=cd0:,sd0:bab4a249db188416
hw.diskcount=2
hw.sensors.maxtmp0.temp0=44.25 degC (Internal)
hw.sensors.maxtmp0.temp1=2.25 degC (External)
hw.cpuspeed=1416
hw.vendor=Apple Computer, Inc.
hw.product=PowerMac10,1
hw.physmem=1073741824
hw.usermem=1073729536
hw.ncpufound=1
hw.allowpowerdown=1