Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-09-03 08:55:56
From: gson
Description: NetBSD 6.1.5 on Asus RS120-E4/PA4
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1.5 (GENERIC)
total memory = 8191 MB
avail memory = 7938 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUS RS120-E4/PA4 (1.00)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU X3220 @ 2.40GHz, id 0x6fb
cpu1 at mainbus0 apid 1: Intel(R) Xeon(R) CPU X3220 @ 2.40GHz, id 0x6fb
cpu2 at mainbus0 apid 2: Intel(R) Xeon(R) CPU X3220 @ 2.40GHz, id 0x6fb
cpu3 at mainbus0 apid 3: Intel(R) Xeon(R) CPU X3220 @ 2.40GHz, id 0x6fb
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xfec10000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,05000709>, AslId <MSFT,00000097>
ACPI Warning: Incorrect checksum in table [SSDT] - 0x29, should be 0x30 (20110623/tbutils-282)
ACPI Warning: Incorrect checksum in table [OEMB] - 0x5C, should be 0x4D (20110623/tbutils-282)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2778 (rev. 0xc0)
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x032c (rev. 0x09)
ppb1: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci3 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16
bge0: adjust device control 0x1a2000 -> 0x1a5000
bge0: ASIC BCM5750 C1 (0x4201), Ethernet address [_MAC_XXXXXXXXXX]
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x27e2 (rev. 0x01)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci4 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 17
bge1: adjust device control 0x1a2000 -> 0x1a5000
bge1: ASIC BCM5750 C1 (0x4201), Ethernet address [_MAC_XXXXXXXXXX]
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
vga0 at pci5 dev 2 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI ES1000 RN50
radeondrm0: Initialized radeon 1.29.0 20080613
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c1 (rev. 0x01)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xc720ff03<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
atabus5 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
ACPI Warning: For \_PR_.CPU1._PSS: SubPackage[8,9] - suspicious power dissipation values (20110623/nsrepair2-644)
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 22464 mW, 2394 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
ACPI Warning: For \_PR_.CPU2._PSS: SubPackage[8,9] - suspicious power dissipation values (20110623/nsrepair2-644)
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
ACPI Warning: For \_PR_.CPU3._PSS: SubPackage[8,9] - suspicious power dissipation values (20110623/nsrepair2-644)
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
ACPI Warning: For \_PR_.CPU4._PSS: SubPackage[8,9] - suspicious power dissipation values (20110623/nsrepair2-644)
coretemp3 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2400220530 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
uhub2 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <TSSTcorpDVD-ROM TS-L332A, , AU00> cdrom removable
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus2 drive 0
wd0: <Samsung SSD 850 EVO 120GB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus3 drive 0
wd1: <WDC WD40EZRX-00SPEB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors
wd1: mbr partition exceeds disk size
wd1: GPT GUID: cf87bb6d-0c3a-11e5-ae17-001bfcf332fd
dk0 at wd1: cf87bb7c-0c3a-11e5-ae17-001bfcf332fd
dk0: 7814033408 blocks at 2048, type: ffs
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus4 drive 0
wd2: <WDC WD20EARX-00PASB0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
wd1: mbr partition exceeds disk size
wd1: mbr partition exceeds disk size
wd1: mbr partition exceeds disk size
wd1: mbr partition exceeds disk size
wd1: mbr partition exceeds disk size
wd1: mbr partition exceeds disk size
wd1: mbr partition exceeds disk size
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wd1: mbr partition exceeds disk size
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB Keyboard, rev 1.10/64.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Logitech USB Keyboard, rev 1.10/64.00, addr 2, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
ugen0 at uhub0 port 2
ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 3
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wd1: mbr partition exceeds disk size