Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-10-17 14:47:13
From: Steve
Description: Cisco Media Convergence Server (MCS7822)
OpenBSD 6.0 (GENERIC) #1917: Tue Jul 26 12:48:33 MDT 2016
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 548 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 536363008 (511MB)
avail mem = 513433600 (489MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/02/99, BIOS32 rev. 0 @ 0xec700, SMBIOS rev. 2.1 @ 0xfa22a (46 entries)
bios0: vendor Compaq version "D01" date 12/02/99
bios0: Compaq Prosignia 720
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5, can't enable ACPI
bios0: ROM list: 0xc0000/0x8000 0xe0000/0x8000!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0x44000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 13 function 0 "DEC 21152" rev 0x03
pci2 at ppb1 bus 2
siop0 at pci2 dev 4 function 0 "Symbios Logic 53c895" rev 0x02: couldn't map interrupt
fxp0 at pci2 dev 5 function 0 "Intel 8255x" rev 0x05, i82558: irq 10, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
vga1 at pci2 dev 6 function 0 "ATI Mach64" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci2 dev 7 function 0 not configured
ne3 at pci0 dev 16 function 0 "Realtek 8029" rev 0x00: irq 9, address [_MAC_XXXXXXXXXX]
piixpcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPD3108AT>
wd0: 16-sector PIO, LBA, 10300MB, 21095424 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, XM-6402B, 1723> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 9
piixpm0 at pci0 dev 20 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 256MB SDRAM ECC PC100CL3
spdmem1 at iic0 addr 0x51: 128MB SDRAM ECC PC100CL2
spdmem2 at iic0 addr 0x52: 128MB SDRAM ECC PC100CL2
isa0 at piixpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 0
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to PIO mode 4
wd0(pciide0:0:0): using PIO mode 4
wd0c: device timeout reading fsbn 65 (wd0 bn 65; cn 0 tn 1 sn 2), retrying
wd0: soft error (corrected)
root on wd0a (6b879165e8995720.a) swap on wd0b dump on wd0b