Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-10-17 17:12:50
From: coypu
Description: Lemote Yeeloong netbsd-7.99.39
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.39 (LOONGSON) #0: Fri Sep 30 07:13:31 UTC 2016
fly@box:/usr/obj-mips64el/sys/arch/evbmips/compile/LOONGSON
Lemote Yeeloong
total memory = 1024 MB
avail memory = 1007 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: 796.98MHz (hz cycles = 3984900, delay divisor = 398)
cpu0: ICT Loongson 2F CPU (0x6303) Rev. 0.3 with MIPS R4010 FPC Rev. 0.1
cpu0: 64 TLB entries, 1TB (40-bit) VAs, 1TB (40-bit) PAs, 16MB max page size
cpu0: 64KB/32B 4-way set-associative L1 instruction cache
cpu0: 64KB/32B 4-way set-associative write-back L1 data cache
cpu0: 512KB/32B 4-way set-associative write-back L2 unified cache
bonito0 at mainbus0: Memory and PCI-X controller, rev. 1
pci0 at bonito0 bus 0
pci0: i/o space, memory space enabled
rtk0 at pci0 dev 7 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at pci intb
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
lynxfb0 at pci0 dev 8 function 0: vendor 126f product 0712 (rev. 0xb0)
lynxfb0: 1024 x 600, 16 bpp, stride 2048
wsdisplay0 at lynxfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 9 function 0: vendor 1033 product 0035 (rev. 0x44)
ohci0: interrupting at pci intd
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 9 function 1: vendor 1033 product 00e0 (rev. 0x05)
ehci0: interrupting at pci intd
ehci0: EHCI version 1.0
ehci0: companion controller, 3 ports each: ohci0
usb1 at ehci0: USB revision 2.0
gcscpcib0 at pci0 dev 14 function 0: vendor 1022 product 2090 (rev. 0x03)
timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000
gcscpcib0: GPIO
gpio0 at gcscpcib0: 32 pins
viaide0 at pci0 dev 14 function 2: AMD CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at isa irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
gcscaudio0 at pci0 dev 14 function 3: AMD Geode CS5536 Audio
gcscaudio0: interrupting at isa irq 9
gcscaudio0: ac97: Avance Logic ALC655 codec; no 3D stereo
gcscaudio0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at gcscaudio0: full duplex, playback, capture, independent
ohci1 at pci0 dev 14 function 4: vendor 1022 product 2094 (rev. 0x02)
ohci1: interrupting at isa irq 11
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 14 function 5: vendor 1022 product 2095 (rev. 0x02)
ehci1: interrupting at isa irq 11
ehci1: EHCI version 1.0
ehci1: companion controller, 4 ports each: ohci1
usb3 at ehci1: USB revision 2.0
isa0 at gcscpcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mips3_cp0_counter" frequency 398490000 Hz quality 100
wd0 at atabus0 drive 0
uhub0 at usb0: vendor 1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
wd0: <HITACHI HTS543232A7A384>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/58.87, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
urtw0 at uhub3 port 4: RTL8187B rev E, address [_MAC_XXXXXXXXXX]
urtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtw0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/evbmips/7.99.39/modules
pid 1(init): ABI set to N32 (e_flags=0x20000027)