Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-10-18 18:36:19
From: gson
Description: NetBSD 7.0.1 on HP ProLiant DL369 G7
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0.1 (GENERIC.201605221355Z)
total memory = 73717 MB
avail memory = 71561 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant DL360 G7
mainbus0 (root)
ACPI: RSDP 0xf4f00 000024 (v02 HP )
ACPI: XSDT 0xdf630140 0000B4 (v01 HP ProLiant 00000002 ?? 0000162E)
ACPI: FACP 0xdf630240 0000F4 (v03 HP ProLiant 00000002 ?? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-716)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20131218/tbfadt-716)
ACPI: DSDT 0xdf630340 0020BD (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0xdf62f100 000040
ACPI: SPCR 0xdf62f140 000050 (v01 HP SPCRRBSU 00000001 ?? 0000162E)
ACPI: MCFG 0xdf62f1c0 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 0xdf62f200 000038 (v01 HP ProLiant 00000002 ?? 0000162E)
ACPI: FFFF 0xdf62f240 000064 (v02 HP ProLiant 00000002 ?? 0000162E)
ACPI: SPMI 0xdf62f2c0 000040 (v05 HP ProLiant 00000001 ?? 0000162E)
ACPI: ERST 0xdf62f300 0001D0 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: APIC 0xdf62f500 00015E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 0xdf62f680 000570 (v01 HP Proliant 00000001 ?? 0000162E)
ACPI: FFFF 0xdf62fc00 000176 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: BERT 0xdf62fd80 000030 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: HEST 0xdf62fdc0 0000BC (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: DMAR 0xdf62fe80 00013C (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: SSDT 0xdf632400 000125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 0xdf632540 0001CF (v03 HP riser1a 00000002 INTL 20061109)
ACPI: SSDT 0xdf632740 0003BB (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 0xdf632b00 000377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 0xdf632e80 004104 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
ioapic1 at mainbus0 apid 0: pa 0xfec80000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu1 at mainbus0 apid 32: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu2 at mainbus0 apid 16: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu3 at mainbus0 apid 48: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu4 at mainbus0 apid 4: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu5 at mainbus0 apid 36: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu6 at mainbus0 apid 20: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu7 at mainbus0 apid 52: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu8 at mainbus0 apid 2: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu9 at mainbus0 apid 34: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu10 at mainbus0 apid 18: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu11 at mainbus0 apid 50: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu12 at mainbus0 apid 1: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu13 at mainbus0 apid 33: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu14 at mainbus0 apid 17: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu15 at mainbus0 apid 49: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu16 at mainbus0 apid 5: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu17 at mainbus0 apid 37: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu18 at mainbus0 apid 21: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu19 at mainbus0 apid 53: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu20 at mainbus0 apid 3: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu21 at mainbus0 apid 35: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu22 at mainbus0 apid 19: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
cpu23 at mainbus0 apid 51: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HP ,ProLiant,00000002>, AslId < M-R^D,0000162e>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MOMB (PNP0C02) at acpi0 not configured
MI0 (IPI0001) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (BEEP, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
COMA (PNP0501) at acpi0 not configured
PMI0 (ACPI000D) at acpi0 not configured
acpitz0 at acpi0 (THM0): cpu0
acpitz0: levels: critical 31.3 C, passive 9.8 C, passive cooling
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ciss0 at pci1 dev 0 function 0: HP Smart Array 11
ciss0: interrupting at ioapic1 pin 4
ciss0: 3 LDs, HW rev 2, FW 5.14/5.14, 64bit fifo rro
scsibus0 at ciss0: 3 targets, 1 lun per target
ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3409 (rev. 0x13)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
pci3 at ppb2 bus 9
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci5 at ppb4 bus 14
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci6 at ppb5 bus 15
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13)
ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb6: link is x4 @ 2.5GT/s
pci7 at ppb6 bus 3
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx0: Ethernet address [_MAC_XXXXXXXXXX]
bnx0: interrupting at ioapic1 pin 6
bnx0: ASIC BCM5709 C0 (0x57092003)
bnx0: PCIe x4 2.5Gbps
bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx1: Ethernet address [_MAC_XXXXXXXXXX]
bnx1: interrupting at ioapic1 pin 13
bnx1: ASIC BCM5709 C0 (0x57092003)
bnx1: PCIe x4 2.5Gbps
bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb7 at pci0 dev 8 function 0: vendor 0x8086 product 0x340f (rev. 0x13)
ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb7: link is x4 @ 2.5GT/s
pci8 at ppb7 bus 4
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
bnx2 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx2: Ethernet address [_MAC_XXXXXXXXXX]
bnx2: interrupting at ioapic1 pin 7
bnx2: ASIC BCM5709 C0 (0x57092003)
bnx2: PCIe x4 2.5Gbps
bnx2: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx3 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx3: Ethernet address [_MAC_XXXXXXXXXX]
bnx3: interrupting at ioapic1 pin 15
bnx3: ASIC BCM5709 C0 (0x57092003)
bnx3: PCIe x4 2.5Gbps
bnx3: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb8 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13)
ppb8: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s
pci9 at ppb8 bus 6
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci0 dev 10 function 0: vendor 0x8086 product 0x3411 (rev. 0x13)
ppb9: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci10 at ppb9 bus 16
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 13 function 0: vendor 0x8086 product 0x343a (rev. 0x13)
pchb2 at pci0 dev 13 function 1: vendor 0x8086 product 0x343b (rev. 0x13)
pchb3 at pci0 dev 13 function 2: vendor 0x8086 product 0x343c (rev. 0x13)
pchb4 at pci0 dev 13 function 3: vendor 0x8086 product 0x343d (rev. 0x13)
pchb5 at pci0 dev 13 function 4: vendor 0x8086 product 0x3418 (rev. 0x13)
pchb6 at pci0 dev 13 function 5: vendor 0x8086 product 0x3419 (rev. 0x13)
pchb7 at pci0 dev 13 function 6: vendor 0x8086 product 0x341a (rev. 0x13)
pchb8 at pci0 dev 14 function 0: vendor 0x8086 product 0x341c (rev. 0x13)
pchb9 at pci0 dev 14 function 1: vendor 0x8086 product 0x341d (rev. 0x13)
pchb10 at pci0 dev 14 function 2: vendor 0x8086 product 0x341e (rev. 0x13)
pchb11 at pci0 dev 14 function 3: vendor 0x8086 product 0x341f (rev. 0x13)
pchb12 at pci0 dev 14 function 4: vendor 0x8086 product 0x3439 (rev. 0x13)
vendor 0x8086 product 0x342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured
vendor 0x8086 product 0x3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured
ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00)
ppb10: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci11 at ppb10 bus 17
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
ppb11 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00)
ppb11: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci12 at ppb11 bus 2
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x103c product 0x3306 (miscellaneous system, revision 0x04) at pci12 dev 0 function 0 not configured
vendor 0x103c product 0x3307 (miscellaneous system, revision 0x04) at pci12 dev 0 function 2 not configured
uhci0 at pci12 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 17
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00)
uhci1: interrupting at ioapic0 pin 20
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00)
uhci2: interrupting at ioapic0 pin 23
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00)
uhci3: interrupting at ioapic0 pin 22
usb3 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 3: vendor 0x8086 product 0x3a39 (rev. 0x00)
uhci4: interrupting at ioapic0 pin 23
usb4 at uhci4: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00)
ehci0: interrupting at ioapic0 pin 20
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci1 uhci2 uhci3 uhci4
usb5 at ehci0: USB revision 2.0
ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90)
pci13 at ppb12 bus 1
pci13: i/o space, memory space enabled
vga0 at pci13 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a18 (rev. 0x00)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it.
ichlpcib0: TCO (watchdog) timer configured.
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C3: FFH, lat 96 us, pow 350 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=96
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=96
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=96
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=96
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=96
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=96
acpicpu6 at cpu6: ACPI CPU
coretemp6 at cpu6: thermal sensor, 1 C resolution, Tjmax=96
acpicpu7 at cpu7: ACPI CPU
coretemp7 at cpu7: thermal sensor, 1 C resolution, Tjmax=96
acpicpu8 at cpu8: ACPI CPU
coretemp8 at cpu8: thermal sensor, 1 C resolution, Tjmax=96
acpicpu9 at cpu9: ACPI CPU
coretemp9 at cpu9: thermal sensor, 1 C resolution, Tjmax=96
acpicpu10 at cpu10: ACPI CPU
coretemp10 at cpu10: thermal sensor, 1 C resolution, Tjmax=96
acpicpu11 at cpu11: ACPI CPU
coretemp11 at cpu11: thermal sensor, 1 C resolution, Tjmax=96
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
acpicpu16 at cpu16: ACPI CPU
acpicpu17 at cpu17: ACPI CPU
acpicpu18 at cpu18: ACPI CPU
acpicpu19 at cpu19: ACPI CPU
acpicpu20 at cpu20: ACPI CPU
acpicpu21 at cpu21: ACPI CPU
acpicpu22 at cpu22: ACPI CPU
acpicpu23 at cpu23: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3066876440 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 8 ports with 8 removable, self powered
IPsec: Initialized Security Association Processing.
sd0 at scsibus0 target 0 lun 0: <HP, LOGICAL VOLUME, 5.14> disk fixed
sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors
sd0: async, 8-bit transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <HP, LOGICAL VOLUME, 5.14> disk fixed
sd1: 465 GB, 65535 cyl, 255 head, 58 sec, 512 bytes/sect x 976707632 sectors
sd1: async, 8-bit transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: <HP, LOGICAL VOLUME, 5.14> disk fixed
sd2: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors
sd2: async, 8-bit transfers, tagged queueing
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse1 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: sd1
root on sd1a dumps on sd1b
root file system type: ffs
WARNING: clock gained 13 days
ugen0 at uhub2 port 2
ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 2
uhidev2 at uhub3 port 1 configuration 1 interface 0
uhidev2: Holtek Semiconductor USB Keyboard, rev 1.10/3.10, addr 2, iclass 3/1
ukbd1 at uhidev2
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub3 port 1 configuration 1 interface 1
uhidev3: Holtek Semiconductor USB Keyboard, rev 1.10/3.10, addr 2, iclass 3/0
uhidev3: 2 report ids
uhid0 at uhidev3 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev3 reportid 2: input=3, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1