Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-10-28 08:45:24
From: coypu
Description: Ubiquiti EdgeRouter Lite 3 netbsd-7.99.41
Loaded initial symtab at 0xffffffff80561458, strtab at 0xffffffff805a8378, # entries 11511
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.41 (ERLITE) #0: Thu Oct 27 19:31:05 IDT 2016
fly@box:/usr/mips64eb/sys/arch/evbmips/compile/ERLITE
Cavium Octeon CN50XX
total memory = 512 MB
avail memory = 499 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpunode0 at mainbus0: 2 cores, crypto+kasumi, 64bit-mul, unaligned-access ok
cpu0 at cpunode0 core 0: 500.00MHz (hz cycles = 5000000, delay divisor = 500)
cpu0: Cavium CN50xx (0xd0601) Rev. 1 with software emulated floating point
cpu0: 64 TLB entries, 512TB (49-bit) VAs, 512TB (49-bit) PAs, 256MB max page size
cpu0: 32KB/128B 4-way set-associative L1 instruction cache
cpu0: 16KB/128B 64-way set-associative write-through coherent L1 data cache
cpu0: 128KB/128B 8-way set-associative write-back L2 unified cache
cpu1 at cpunode0 core 1: disabled (uniprocessor kernel)
wdog0 at cpunode0: default period is 4 seconds
iobus0 at mainbus0
iobus0: initializing POW
iobus0: initializing FPA
com0 at iobus0 address 0x0001180000000800: ns16650, no ERS, working fifo
com0: console
com at iobus0 address 0x0001180000000c00 not configured
octeon_rnm0 at iobus0 address 0x0001180040000000
octeon_rnm0: random number generator enabled: 1hz
octeon_twsi at iobus0 address 0x0001180000001000 not configured
octeon_mpi at iobus0 address 0x0001070000001000 not configured
octeon_gmx0 at iobus0 address 0x0001180008000000
cnmac0 at octeon_gmx0: address=0x0001180008000000: RGMII
cnmac0: Ethernet address [_MAC_XXXXXXXXXX]
atphy0 at cnmac0 phy 7: Atheros AR8035 10/100/1000 PHY, rev. 2
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto
cnmac1 at octeon_gmx0: address=0x0001180008000000: RGMII
cnmac1: Ethernet address [_MAC_XXXXXXXXXX]
atphy1 at cnmac1 phy 6: Atheros AR8035 10/100/1000 PHY, rev. 2
atphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto
cnmac2 at octeon_gmx0: address=0x0001180008000000: RGMII
cnmac2: Ethernet address [_MAC_XXXXXXXXXX]
atphy2 at cnmac2 phy 5: Atheros AR8035 10/100/1000 PHY, rev. 2
atphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto
dwctwo0 at iobus0 address 0x0001180068000000
usb0 at dwctwo0: USB revision 2.0
bootbus0 at mainbus0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mips3_cp0_counter" frequency 500000000 Hz quality 100
uhub0 at usb0: vendor 0000 DWC2 root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: vendor 13fe USB DISK 2.0, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
uhub0: illegal enable change, port 1
sd0 at scsibus0 target 0 lun 0: <, USB DISK 2.0, PMAP> disk removable
sd0: 3824 MB, 959 cyl, 255 head, 32 sec, 512 bytes/sect x 7831552 sectors
WARNING: 1 error while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
vfs_mountroot: can't open root device
cannot mount root, error = 6
root device (default sd0a): cnmac0
dump device:
file system (default generic):
root on cnmac0
mountroot: trying ffs...
mountroot: trying nfs...
nfs_boot: trying DHCP/BOOTP
cnmac0: link state UP (was UNKNOWN)
cnmac0: link state DOWN (was UP)
cnmac0: link state UP (was DOWN)
nfs_boot: DHCP next-server:[_IP_XXXXXX]
nfs_boot: my_addr=192.168.0.2
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=0.0.0.0
root on[_IP_XXXXXX]:/erlite/root
root time: 0x58130f1e
root file system type: nfs
kern.module.path=/stand/evbmips/7.99.41/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init):
init: copying out path `/sbin/init' 11
pid 1(init): ABI set to N32 (e_flags=0x20000027)