Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-11-10 13:16:14
From: janus
Description: Sun Microsystems Sun Fire v245
OpenBSD 6.0 (GENERIC.MP) #0: Tue Sep 6 17:42:53 CEST 2016 [_EMAIL_XXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP real mem = 4294967296 (4096MB) avail mem = 4204666880 (4009MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: Sun Fire V245 cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) "memory-controller" at mainbus0 not configured "memory-controller" at mainbus0 not configured pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13 pyro0: dvma map c0000000-ffffffff pci0 at pyro0 ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba pci1 at ppb0 bus 3 ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba pci2 at ppb1 bus 4 ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00 pci3 at ppb2 bus 5 ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00 rtc0 at ebus0 addr 70-73: m5823 pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x784 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi pci4 at ppb3 bus 6 ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi pci5 at ppb4 bus 7 ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba pci6 at ppb5 bus 8 ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci7 at ppb6 bus 9 bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address [_MAC_XXXXXXXXXX] brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address [_MAC_XXXXXXXXXX] brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 pci8 at ppb7 bus 10 ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba pci9 at ppb8 bus 11 ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci10 at ppb9 bus 12 bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address [_MAC_XXXXXXXXXX] brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address [_MAC_XXXXXXXXXX] brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 pci11 at ppb10 bus 13 mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi mpi0: SAS1064, firmware[_IP_XX] scsibus2 at mpi0: 63 targets sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed naa.600508e000000000a55e8bbf59315a08 sd0: 279890MB, 512 bytes/sector, 573214720 sectors pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4 pyro1: dvma map c0000000-ffffffff pci12 at pyro1 ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci13 at ppb11 bus 3 ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci14 at ppb12 bus 4 radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00 drm0 at radeondrm0 radeondrm0: ivec 0x7cb ebus1 at mainbus0 "flashprom" at ebus1 addr 0-1fffff not configured com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo com0: console com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo "rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured "gpio" at ebus1 addr c0-c0 not configured led0 at ebus1 addr 0-80: rev 0x5a power0 at ebus1 addr 40-c1 ivec 0x7c3 "i2c" at mainbus0 not configured uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 wskbd0 at ukbd0 mux 1 uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 2 uhidev1: iclass 3/1, 3 report ids ums0 at uhidev1 reportid 1: 5 buttons, Z dir wsmouse0 at ums0 mux 0 uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0 uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0 root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b BIOS signature incorrect 0 0 radeondrm0: 1024x768 wsdisplay0 at radeondrm0 mux 1 wskbd0: connecting to wsdisplay0 wsdisplay0: screen 0 added (std, sun emulation)