Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-02-13 10:18:18
From: i3enedek
Description: Thinkpad T60
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.59 (MONOLITH) #14: Fri Feb 10 01:13:50 GMT 2017
potato@monolith:/usr/src/obj/sys/arch/amd64/compile/MONOLITH
total memory = 3070 MB
avail memory = 2962 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 2007V7Z (ThinkPad T60)
mainbus0 (root)
ACPI: RSDP 0x00000000000F67E0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BFED1322 00008C (v01 LENOVO TP-79 00002270 LTP 00000000)
ACPI: FACP 0x00000000BFED1400 0000F4 (v03 LENOVO TP-79 00002270 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170119/tbfadt-642)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20170119/tbfadt-693)
ACPI: DSDT 0x00000000BFED175E 00D467 (v01 LENOVO TP-79 00002270 MSFT 0100000E)
ACPI: FACS 0x00000000BFEF4000 000040
ACPI: FACS 0x00000000BFEF4000 000040
ACPI: SSDT 0x00000000BFED15B4 0001AA (v01 LENOVO TP-79 00002270 MSFT 0100000E)
ACPI: ECDT 0x00000000BFEDEBC5 000052 (v01 LENOVO TP-79 00002270 LNVO 00000001)
ACPI: TCPA 0x00000000BFEDEC17 000032 (v02 LENOVO TP-79 00002270 LNVO 00000001)
ACPI: APIC 0x00000000BFEDEC49 000068 (v01 LENOVO TP-79 00002270 LNVO 00000001)
ACPI: MCFG 0x00000000BFEDECB1 00003C (v01 LENOVO TP-79 00002270 LNVO 00000001)
ACPI: HPET 0x00000000BFEDECED 000038 (v01 LENOVO TP-79 00002270 LNVO 00000001)
ACPI: SLIC 0x00000000BFEDEE62 000176 (v01 LENOVO TP-79 00002270 LTP 00000000)
ACPI: BOOT 0x00000000BFEDEFD8 000028 (v01 LENOVO TP-79 00002270 LTP 00000001)
ACPI: SSDT 0x00000000BFEF26D9 00025F (v01 LENOVO TP-79 00002270 INTL 20050513)
ACPI: SSDT 0x00000000BFEF2938 0000A6 (v01 LENOVO TP-79 00002270 INTL 20050513)
ACPI: SSDT 0x00000000BFEF29DE 0004F7 (v01 LENOVO TP-79 00002270 INTL 20050513)
ACPI: SSDT 0x00000000BFEF2ED5 0001D8 (v01 LENOVO TP-79 00002270 INTL 20050513)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz, id 0x6f6
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz, id 0x6f6
acpi0 at mainbus0: Intel ACPICA 20170119
acpi0: X/RSDT: OemId <LENOVO,TP-79 ,00002270>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8045840CD0 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8045841810 00065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80BFA74630 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80457CF688 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
TPM (ATM1200) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SONY LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [30,40,50,60,70,80,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0: 0x0210 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
GDCK (IBM0079) at acpi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 99.0 C, passive 94.5 C, passive cooling
ACPI: Enabled 2 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Passthrough, Palm detect, Two button click pad, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 27a0 (rev. 0x03)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 27a1 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 7149 (rev. 0x00)
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 11d4 product 1981
hdafg0: DAC00 2ch: Speaker [Jack & Built-In]
hdafg0: ADC01 2ch: CD [Built-In], Mic In [Jack & Built-In]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr1 at audio0: PC Speaker (synthesized)
ppb1 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci2 dev 0 function 0: Intel i82573L Gigabit Ethernet (rev. 0x00)
wm0: interrupting at msi1 vec 0
wm0: PCI-Express bus
wm0: 64 words (8 address bits) SPI EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci3 dev 0 function 0: vendor 8086 product 4227 (rev. 0x02)
wpi0: interrupting at msi2 vec 0
wpi0: MoW2, address [_MAC_XXXXXXXXXX]
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 2: vendor 8086 product 27d4 (rev. 0x02)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci4 dev 0 function 0: vendor 1b21 product 1042 (rev. 0x00)
xhci0: interrupting at msi3 vec 0
xhci0: xHCI version 0.96
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ppb4 at pci0 dev 28 function 3: vendor 8086 product 27d6 (rev. 0x02)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 12
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb2 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17
usb3 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb4 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb5 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb6 at ehci0: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
pci6 at ppb5 bus 21
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: vendor 104c product ac56 (rev. 0x00)
cbb0: cacheline 0x8 lattimer 0xa8
cbb0: bhlc 0x2a808
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 27c5 (rev. 0x02)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xc710ff03<PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: ATML 97SC3203 rev 0x5
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 31000 mW, 2333 MHz
acpicpu0: P1: FFH, lat 10 us, pow 26000 mW, 2000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 22000 mW, 1667 MHz
acpicpu0: P3: FFH, lat 10 us, pow 17000 mW, 1333 MHz
acpicpu0: P4: FFH, lat 10 us, pow 13000 mW, 1000 MHz
acpicpu0: T0: FFH, lat 1 us, pow 13000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 11375 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 9750 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8125 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 6500 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 4875 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3250 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1625 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 1b21 xHCI Root Hub, class 9/0, rev 1.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1b21 xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub2 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb5: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0
uhub4 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb4: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 8 ports with 8 removable, self powered
wd0: <OCZ-AGILITY3>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
ath0 at cardbus0 function 0
ath0: unable to attach hardware; HAL status 3
wd1 at atabus1 drive 0
wd1: <Samsung SSD 850 EVO 120GB>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub7 at uhub6 port 6: vendor 04b3 product 4485, class 9/0, rev 2.00/0.01, addr 2
uhub7: multiple transaction translators
uhub7: 4 ports with 4 removable, self powered
ehci0: handing over full speed device on port 8 to uhci3
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 1 error while detecting hardware; check system log.
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.59/modules
drm: initializing kernel modesetting (RV515 0x1002:0x7149 0x17AA:0x2005).
drm: register mmio base: 0xee100000
drm: register mmio size: 65536
drm kern info: ATOM BIOS: M64CSP/M62CSP/M54CSP/M52CSP
drm: Generation 2 PCI interface, using max accessible memory
radeon0: info: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (64M used)
radeon0: info: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
drm: Detected VRAM RAM=80M, BAR=128M
drm: RAM width 64bits DDR
Zone kernel: Available graphics memory: 1065448 kiB
drm: radeon: 64M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: radeon: 1 quad pipes, 1 z pipes initialized.
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000008000000 and cpu addr 0x0xffff8000373c2000
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: Loading R500 Microcode
drm: radeon: ring at 0x0000000008001000
drm: ring test succeeded in 4 usecs
drm: ib test succeeded in 0 usecs
drm: Radeon Display Connectors
drm: Connector 0:
drm: VGA-1
drm: DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
drm: Connector 1:
drm: LVDS-1
drm: DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
drm: Encoders:
drm: LCD1: INTERNAL_LVTM1
drm: Connector 2:
drm: DVI-I-1
drm: HPD1
drm: DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
drm: Encoders:
drm: DFP1: INTERNAL_KLDSCP_TMDS1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff8000375e0000, size 1400x1050, depth 32, stride 5632
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ugen0 at uhub3 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
acpibat0: normal capacity on 'charge state'
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)