Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-02-16 10:55:33
From: R0B_ROD
Description: HP 15 A6-5200 amd64
own Output Device, head 0, bios detect
acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pckbc1 at acpi0 (KBC0, HPQ8001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1EAD) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: 13-42 LION rechargeable battery
acpibat0: granularity: low->warn 0.264 Ah, warn->full 3.780 Ah
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
WLBU (HPQ6001) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
acpitz0 at acpi0 (TSZ0)
acpitz0: levels: hot 99.0 C, passive 69.0 C, passive cooling
acpitz1 at acpi0 (TSZ2)
acpitz1: levels: hot 90.0 C, passive cooling
AS34 (ASD0001) at acpi0 not configured
ACPI: Enabled 2 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.5
pms0: Extended W mode, Palm detect, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 1536 (rev. 0x00)
radeon0 at pci0 dev 1 function 0: vendor 1002 product 9830 (rev. 0x00)
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1538 (rev. 0x00)
ppb0 at pci0 dev 2 function 1: vendor 1022 product 1439 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 3: vendor 1022 product 1439 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 2.5GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci2 dev 0 function 0: vendor 10ec product 5229 (rev. 0x01)
rtsx0: interrupting at msi1 vec 0
sdmmc0 at rtsx0
ppb2 at pci0 dev 2 function 4: vendor 1022 product 1439 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 168c product 0032 (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 2 function 5: vendor 1022 product 1439 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x07)
re0: interrupting at msi2 vec 0
re0: Unknown revision (0x44800000)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
ukphy0 at re0 phy 7: OUI 0x00e04c, model 0x0008, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xhci0 at pci0 dev 16 function 0: vendor 1022 product 7814 (rev. 0x01)
xhci0: interrupting at msi3 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7804 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff01<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci0: interrupting at ioapic0 pin 17
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb3 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb4 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci1: interrupting at ioapic0 pin 17
ehci1: EHCI version 1.0
ehci1: companion controller, 4 ports each: ohci1
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 780b (rev. 0x3a)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at msi4 vec 0
hdafg1 at hdaudio1: vendor 10ec product 0282
hdafg1: DAC00 2ch: Speaker [Built-In]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: ADC02 2ch: Mic In [Jack]
hdafg1: ADC03 2ch: Mic In [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr1 at audio0: PC Speaker (synthesized)
pcib0 at pci0 dev 20 function 3: vendor 1022 product 780e (rev. 0x11)
sdhc0 at pci0 dev 20 function 7: vendor 1022 product 7813 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 2.0, rev 16, SDMA, 50000 kHz, HS 3.3V, 2048 byte blocks
sdmmc1 at sdhc0 slot 0
pchb2 at pci0 dev 24 function 0: vendor 1022 product 1530 (rev. 0x00)
pchb3 at pci0 dev 24 function 1: vendor 1022 product 1531 (rev. 0x00)
pchb4 at pci0 dev 24 function 2: vendor 1022 product 1532 (rev. 0x00)
pchb5 at pci0 dev 24 function 3: vendor 1022 product 1533 (rev. 0x00)
pchb6 at pci0 dev 24 function 4: vendor 1022 product 1534 (rev. 0x00)
pchb7 at pci0 dev 24 function 5: vendor 1022 product 1535 (rev. 0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: C2: I/O, lat 400 us, pow 0 mW
acpicpu0: P0: FFH, lat 4 us, pow 4892 mW, 2000 MHz
acpicpu0: P1: FFH, lat 4 us, pow 4590 mW, 1800 MHz
acpicpu0: P2: FFH, lat 4 us, pow 3480 mW, 1600 MHz
acpicpu0: P3: FFH, lat 4 us, pow 2310 mW, 1200 MHz
acpicpu0: P4: FFH, lat 4 us, pow 1901 mW, 1000 MHz
acpicpu0: P5: FFH, lat 4 us, pow 1547 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 394 cycle TSC drift observed
acpivga0: unknown notify: 0xd0
uhub0 at usb0: vendor 1022 xHCI Root Hub, class 9/0, rev 1.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1ACPI Error: No handler for Region [RCM0] (0xfffffe811def4dc8) [SystemCMOS] (20170119/evregion-183)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20170119/exfldio-323)
: vendor 1022 xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
ACPI Error: Method parse/execution failed [\_SB.WMID.ESDT] (Node 0xfffffe811deefc10), AE_NOT_EXIST (20170119/psparse-560)
ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC0.EC0._Q42] (Node 0xfffffe811ded6190), AE_NOT_EXIST (20170119/psparse-560)
uhub1: 2 ports with 2 removable, self powered
acpiec0: GPE query method _Q42 failed: AE_NOT_EXISTacpiacad0: AC adapter online.
acpivga0: unknown notify: 0xd0
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
uhub4 at usb5: vendor 1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb4: vendor 1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <HGST HTS545050A7E680>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp DVDRW DU8A6SH, 4B6451901019, DH61> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: PNY Technologies USB 2.0 FD, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
uvideo0 at uhub4 port 1 configuration 1 interface 0: SuYin HP Webcam, rev 2.00/1.04, addr 2
video0 at uvideo0: SuYin HP Webcam, rev 2.00/1.04, addr 2
sd0 at scsibus0 target 0 lun 0: <PNY, USB 2.0 FD, 1100> disk removable
sd0: 7788 MB, 1023 cyl, 255 head, 63 sec, 512 bytes/sect x 15950592 sectors
WARNING: sd0: total sector size in disklabel (2457600) != the size of sd0 (15950592)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
WARNING: sd0: total sector size in disklabel (2457600) != the size of sd0 (15950592)
WARNING: sd0: total sector size in disklabel (2457600) != the size of sd0 (15950592)
WARNING: sd0: total sector size in disklabel (2457600) != the size of sd0 (15950592)
WARNING: sd0: total sector size in disklabel (2457600) != the size of sd0 (15950592)
WARNING: 4 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
WARNING: sd0: total sector size in disklabel (2457600) != the size of sd0 (15950592)
root file system type: ffs
kern.module.path=/stand/amd64/7.99.59/modules
drm: initializing kernel modesetting (KABINI 0x1002:0x9830 0x103C:0x21F7).
drm: register mmio base: 0xf0c00000
drm: register mmio size: 262144
drm: doorbell mmio base: 0xF0000000
drm: doorbell mmio size: 8388608
drm kern info: ATOM BIOS: AMD
radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon0: info: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
drm: Detected VRAM RAM=200M, BAR=256M
drm: RAM width 128bits DDR
Zone kernel: Available graphics memory: 1235508 kiB
drm: radeon: 512M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading KABINI Microcode
drm: Internal thermal controller without fan control
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffff80003f968c00
radeon0: info: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x0xffff80003f968c04
radeon0: info: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x0xffff80003f968c08
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffff80003f968c0c
radeon0: info: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x0xffff80003f968c10
radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0x0xffff80003f9b6c98
radeon0: error: VCE init error (-22).
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic1 pin 20 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 3 usecs
drm: ring test on 1 succeeded in 2 usecs
drm: ring test on 2 succeeded in 2 usecs
drm: ring test on 3 succeeded in 2 usecs
drm: ring test on 4 succeeded in 2 usecs
drm: ring test on 5 succeeded in 2 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 1 succeeded in 0 usecs
radeon0: error: ring 2 stalled for more than 10000msec
radeon0: warning: GPU lockup (waiting for 0x0000000000000001 last fence id 0x0000000000000000 on ring 2)
DRM error in cik_ib_test: radeon: fence wait failed (-11).
DRM error in radeon_ib_ring_tests: radeon: failed testing IB on ring 2 (-11).
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 4 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm: LVDS-1
drm: HPD1
drm: DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
drm: Encoders:
drm: LCD1: INTERNAL_UNIPHY
drm: Connector 1:
drm: HDMI-A-1
drm: HPD2
drm: DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
drm: Encoders:
drm: DFP1: INTERNAL_UNIPHY
drm: Connector 2:
drm: VGA-1
drm: DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff800040247000, size 1366x768, depth 32, stride 5632
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
acpibat0: normal capacity on 'charge state'
acpitz0: warning under limit on 'FAN'
acpitz0: normal state on 'FAN'
acpitz0: warning under limit on 'FAN'
acpitz0: normal state on 'FAN'
acpitz0: warning under limit on 'FAN'
acpitz0: normal state on 'FAN'
syncing disks... 1 1 1 1 1 1 1 1 done
unmounted tmpfs on /tmp type tmpfs
cd0: detached
ukphy0: detached
atapibus0: detached
wd0: detached
atabus1: detached
atabus0: detached
pci3: detached
pci1: detached
sysbeep0: detached
midi0: detached
pchb7: detached
pchb6: detached
pchb5: detached
pchb4: detached
pchb3: detached
pchb2: detached
ppb2: detached
ppb0: detached
pchb1: detached
pchb0: detached
forcefully unmounted /dev/sd0a on / type ffs
sd0: detached
scsibus0: detached
rebooting...
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.59 (GENERIC.201702120400Z)
total memory = 3553 MB
avail memory = 3428 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP 15 Notebook PC (096E120003405F00001620182)
mainbus0 (root)
ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BFBFE120 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x00000000BFBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: DSDT 0x00000000BFBE9000 00EBB0 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
ACPI: FACS 0x00000000BFB26000 000040
ACPI: UEFI 0x00000000BFBFD000 0001B6 (v01 HPQOEM 21F7 00000001 HP 00040000)
ACPI: HPET 0x00000000BFBFB000 000038 (v01 HPQOEM 21F7 00000001 HP 00040000)
ACPI: APIC 0x00000000BFBFA000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MCFG 0x00000000BFBF9000 00003C (v01 HPQOEM 21F7 00000001 HP 00040000)
ACPI: ASF! 0x00000000BFBF8000 0000A5 (v32 HPQOEM 21F7 00000001 HP 00040000)
ACPI: BOOT 0x00000000BFBE8000 000028 (v01 HPQOEM 21F7 00000001 HP 00040000)
ACPI: FPDT 0x00000000BFBE6000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MSDM 0x00000000BFBE5000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: SSDT 0x00000000BFBE4000 000CB4 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDF000 0046B7 (v02 HPQOEM 21F7 00000002 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDE000 000170 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDC000 00196C (v01 HPQOEM 21F7 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDB000 00008C (v01 HPQOEM 21F7 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDA000 000662 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBD9000 000D23 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBD7000 0010C2 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 9 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 0x21, 32 pins
cpu0 at mainbus0 apid 0
cpu0: AMD A6-5200 APU with Radeon(TM) HD Graphics , id 0x700f01
cpu1 at mainbus0 apid 1
cpu1: AMD A6-5200 APU with Radeon(TM) HD Graphics , id 0x700f01
cpu2 at mainbus0 apid 2
cpu2: AMD A6-5200 APU with Radeon(TM) HD Graphics , id 0x700f01
cpu3 at mainbus0 apid 3
cpu3: AMD A6-5200 APU with Radeon(TM) HD Graphics , id 0x700f01
acpi0 at mainbus0: Intel ACPICA 20170119
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEMR (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [0,10,20,30,40,50,60,70,80,90,100]
acpivga0: connected output devices:
acpivga0: 0x0100: Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0: 0x0200: TV, head 0
acpivga0: 0x0210: Unknown Output Device, head 0, bios detect
acpivga0: 0x0220: Unknown Output Device, head 0, bios detect
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pckbc1 at acpi0 (KBC0, HPQ8001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1EAD) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: 13-42 LION rechargeable battery
acpibat0: granularity: low->warn 0.264 Ah, warn->full 3.780 Ah
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
WLBU (HPQ6001) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
acpitz0 at acpi0 (TSZ0)
acpitz0: levels: hot 99.0 C, passive 61.0 C, passive cooling
acpitz1 at acpi0 (TSZ2)
acpitz1: levels: hot 90.0 C, passive cooling
AS34 (ASD0001) at acpi0 not configured
ACPI: Enabled 2 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.5
pms0: Extended W mode, Palm detect, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 1536 (rev. 0x00)
radeon0 at pci0 dev 1 function 0: vendor 1002 product 9830 (rev. 0x00)
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1538 (rev. 0x00)
ppb0 at pci0 dev 2 function 1: vendor 1022 product 1439 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 3: vendor 1022 product 1439 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 2.5GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci2 dev 0 function 0: vendor 10ec product 5229 (rev. 0x01)
rtsx0: interrupting at msi1 vec 0
sdmmc0 at rtsx0
ppb2 at pci0 dev 2 function 4: vendor 1022 product 1439 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 168c product 0032 (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 2 function 5: vendor 1022 product 1439 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x07)
re0: interrupting at msi2 vec 0
re0: Unknown revision (0x44800000)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
ukphy0 at re0 phy 7: OUI 0x00e04c, model 0x0008, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xhci0 at pci0 dev 16 function 0: vendor 1022 product 7814 (rev. 0x01)
xhci0: interrupting at msi3 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7804 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff01<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci0: interrupting at ioapic0 pin 17
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb3 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1022 product 7807 (rev. 0x39)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb4 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1022 product 7808 (rev. 0x39)
ehci1: interrupting at ioapic0 pin 17
ehci1: EHCI version 1.0
ehci1: companion controller, 4 ports each: ohci1
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 780b (rev. 0x3a)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at msi4 vec 0
hdafg1 at hdaudio1: vendor 10ec product 0282
hdafg1: DAC00 2ch: Speaker [Built-In]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: ADC02 2ch: Mic In [Jack]
hdafg1: ADC03 2ch: Mic In [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr1 at audio0: PC Speaker (synthesized)
pcib0 at pci0 dev 20 function 3: vendor 1022 product 780e (rev. 0x11)
sdhc0 at pci0 dev 20 function 7: vendor 1022 product 7813 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 2.0, rev 16, SDMA, 50000 kHz, HS 3.3V, 2048 byte blocks
sdmmc1 at sdhc0 slot 0
pchb2 at pci0 dev 24 function 0: vendor 1022 product 1530 (rev. 0x00)
pchb3 at pci0 dev 24 function 1: vendor 1022 product 1531 (rev. 0x00)
pchb4 at pci0 dev 24 function 2: vendor 1022 product 1532 (rev. 0x00)
pchb5 at pci0 dev 24 function 3: vendor 1022 product 1533 (rev. 0x00)
pchb6 at pci0 dev 24 function 4: vendor 1022 product 1534 (rev. 0x00)
pchb7 at pci0 dev 24 function 5: vendor 1022 product 1535 (rev. 0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: C2: I/O, lat 400 us, pow 0 mW
acpicpu0: P0: FFH, lat 4 us, pow 4892 mW, 2000 MHz
acpicpu0: P1: FFH, lat 4 us, pow 4590 mW, 1800 MHz
acpicpu0: P2: FFH, lat 4 us, pow 3480 mW, 1600 MHz
acpicpu0: P3: FFH, lat 4 us, pow 2310 mW, 1200 MHz
acpicpu0: P4: FFH, lat 4 us, pow 1901 mW, 1000 MHz
acpicpu0: P5: FFH, lat 4 us, pow 1547 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 353 cycle TSC drift observed
acpivga0: unknown notify: 0xd0
uhub0 at usb0: vendor 1022 xHCI Root Hub, class 9/0, rev 1.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1022 xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
ACPI Error: No handler for Region [RCM0] (0xfffffe811def4dc8) [SystemCMOS] (20170119/evregion-183)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20170119/exfldio-323)
ACPI Error: Method parse/execution failed [\_SB.WMID.ESDT] (Node 0xfffffe811deefc10), AE_NOT_EXIST (20170119/psparse-560)
ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC0.EC0._Q42] (Node 0xfffffe811ded6190), AE_NOT_EXIST (20170119/psparse-560)
acpiec0: GPE query method _Q42 failed: AE_NOT_EXISTacpiacad0: AC adapter online.
acpivga0: unknown notify: 0xd0
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb4: vendor 1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
uhub4 at usb5: vendor 1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb3: vendor 1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <HGST HTS545050A7E680>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp DVDRW DU8A6SH, 4B6451901019, DH61> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uvideo0 at uhub4 port 1 configuration 1 interface 0: SuYin HP Webcam, rev 2.00/1.04, addr 2
video0 at uvideo0: SuYin HP Webcam, rev 2.00/1.04, addr 2
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 4 errors while detecting hardware; check system log.
boot device: wd0
root on wd0f dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.59/modules
drm: initializing kernel modesetting (KABINI 0x1002:0x9830 0x103C:0x21F7).
drm: register mmio base: 0xf0c00000
drm: register mmio size: 262144
drm: doorbell mmio base: 0xF0000000
drm: doorbell mmio size: 8388608
drm kern info: ATOM BIOS: AMD
radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon0: info: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
drm: Detected VRAM RAM=200M, BAR=256M
drm: RAM width 128bits DDR
Zone kernel: Available graphics memory: 1235646 kiB
drm: radeon: 512M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading KABINI Microcode
drm: Internal thermal controller without fan control
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffff80003f922c00
radeon0: info: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x0xffff80003f922c04
radeon0: info: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x0xffff80003f922c08
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffff80003f922c0c
radeon0: info: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x0xffff80003f922c10
radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0x0xffff80003f976c98
radeon0: error: VCE init error (-22).
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic1 pin 20 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 3 usecs
drm: ring test on 1 succeeded in 2 usecs
drm: ring test on 2 succeeded in 2 usecs
drm: ring test on 3 succeeded in 2 usecs
drm: ring test on 4 succeeded in 2 usecs
drm: ring test on 5 succeeded in 2 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 1 succeeded in 0 usecs
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: HP js100, rev 2.00/11.00, addr 1
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <hp, js100, 1100> disk removable
sd0: 7634 MB, 1023 cyl, 255 head, 63 sec, 512 bytes/sect x 15634432 sectors
dk0 at sd0: "EFI", 1184 blocks at 874139, type: hfs
radeon0: error: ring 2 stalled for more than 10000msec
radeon0: warning: GPU lockup (waiting for 0x0000000000000001 last fence id 0x0000000000000000 on ring 2)
DRM error in cik_ib_test: radeon: fence wait failed (-11).
DRM error in radeon_ib_ring_tests: radeon: failed testing IB on ring 2 (-11).
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 4 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm: LVDS-1
drm: HPD1
drm: DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
drm: Encoders:
drm: LCD1: INTERNAL_UNIPHY
drm: Connector 1:
drm: HDMI-A-1
drm: HPD2
drm: DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
drm: Encoders:
drm: DFP1: INTERNAL_UNIPHY
drm: Connector 2:
drm: VGA-1
drm: DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff80004023c000, size 1366x768, depth 32, stride 5632
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
acpibat0: normal capacity on 'charge state'