Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-04-08 10:31:49
From: kamil_at_NetBSD
Description: Intel CPU 7 cores, 30G RAM, KVM
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.39 (GENERIC.201610050910Z)
total memory = 30719 MB
avail memory = 29808 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
QEMU Standard PC (i440FX + PIIX, 1996) (pc-i440fx-2.7)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6990 000014 (v00 BOCHS )
ACPI: RSDT 0x00000000BFFE1B0D 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 0x00000000BFFE19B9 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 0x00000000BFFE0040 001979 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 0x00000000BFFE0000 000040
ACPI: APIC 0x00000000BFFE1A2D 0000A8 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 0x00000000BFFE1AD5 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x11, 24 pins
cpu0 at mainbus0 apid 0
cpu0: QEMU Virtual CPU version 2.5+, id 0x663
cpu1 at mainbus0 apid 1
cpu1: QEMU Virtual CPU version 2.5+, id 0x663
cpu2 at mainbus0 apid 2
cpu2: QEMU Virtual CPU version 2.5+, id 0x663
cpu3 at mainbus0 apid 3
cpu3: QEMU Virtual CPU version 2.5+, id 0x663
cpu4 at mainbus0 apid 4
cpu4: QEMU Virtual CPU version 2.5+, id 0x663
cpu5 at mainbus0 apid 5
cpu5: QEMU Virtual CPU version 2.5+, id 0x663
cpu6 at mainbus0 apid 6
cpu6: QEMU Virtual CPU version 2.5+, id 0x663
acpi0 at mainbus0: Intel ACPICA 20160527
acpi0: X/RSDT: OemId <BOCHS ,BXPCRSDT,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 100000000 Hz quality 2000
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
FWCF (QEMU0002) at acpi0 not configured
ACPI: Enabled 3 GPEs in block 00 to 0F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: interrupting at ioapic0 pin 9
iic0 at piixpm0: I2C bus
vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga0 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at ioapic0 pin 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
vmt0 at cpu0: Unknown
vmware: open failed, eax=564d5868, ecx=0000001e, edx=00005658
vmt0: failed to open backdoor RPC channel (TCLO protocol)
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 100 GB, 208050 cyl, 16 head, 63 sec, 512 bytes/sect x 209715200 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 2.5+> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.39/modules
clock: unknown CMOS layout