Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-04-22 14:02:24
From: kroni
Description: getac E100 NetBSD 7.1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1 (GENERIC.201703111743Z)
total memory = 2037 MB
avail memory = 1987 MB
kern.module.path=/stand/i386/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MITAC Corporation E100 (Not Applicable)
mainbus0 (root)
ACPI: RSDP 0xf79c0 000024 (v02 PTLTD )
ACPI: XSDT 0x7f65f7a7 000084 (v01 MITAC_ MITACMTC 06040000 LTP 00000000)
ACPI: FACP 0x7f667be0 0000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
ACPI: DSDT 0x7f66037b 0077F1 (v01 INTEL CALISTGA 06040000 INTL 20050624)
ACPI: FACS 0x7f668fc0 000040
ACPI: APIC 0x7f667cd4 000068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 0x7f667d3c 000038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 0x7f667d74 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: TCPA 0x7f667db0 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
ACPI: TMOR 0x7f667de2 000026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: APIC 0x7f667e08 00005A (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: SLIC 0x7f667e62 000176 (v01 MITAC_ MITACMTC 06040000 LTP 00000001)
ACPI: BOOT 0x7f667fd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x7f6601c7 0001B4 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0x7f65fd11 0004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0x7f65f82b 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Genuine Intel(R) processor 800MHz, id 0x6d8
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <MITAC_,MITACMTC,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat1 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: 4 10 11 12 13 14 15 16 17 18 19 20 22 23 25 26 28 29 31 32 34 35 37 38 40 41 43 44 46 47 49 50 52 53 55 56 58 59 61 62 64 65 67 68 70 71 73 74 76 77 79 80 82 83 85 86 88 89 90 91 92 93 94 100
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0, bios detect
acpivga0: 0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
FWHD (INT0800) at acpi0 not configured
MATH (PNP0C04) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
UAR1 (PNP0501) at acpi0 not configured
MPMD (MTC0303) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
acpitz0 at acpi0 (TZ0): cpu0
acpitz0: levels: critical 99.0 C, passive 82.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x27a0 (rev. 0x03)
agp0 at pchb0: i915-family chipset
agp0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x27a1 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
drm: Memory usable by graphics device = 256M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xdb050000, size 800x600, depth 32, stride 3200
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek ALC262
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled
re0 at pci2 dev 4 function 0: RealTek 8169SC/8110SC Single-chip Gigabit Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 21
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
re0: PHY read failed
ifmedia_set: no match for 0x20/0xfffffff
cbb0 at pci2 dev 5 function 0: vendor 0x104c product 0x8039 (rev. 0x00)
fwohci0 at pci2 dev 5 function 1: vendor 0x104c product 0x803a (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 21
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:fd:38
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x104c product 0x803d (miscellaneous communications) at pci2 dev 5 function 4 not configured
cbb0: cacheline 0x10 lattimer 0x20
cbb0: bhlc 0x822010
cbb0: interrupting at ioapic0 pin 20
cardslot0 at cbb0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 1 us, pow 1000 mW
acpicpu0: C2: I/O, lat 1 us, pow 500 mW
acpicpu0: C3: I/O, lat 57 us, pow 100 mW
acpicpu0: P0: FFH, lat 10 us, pow 27000 mW, 800 MHz
acpicpu0: P1: FFH, lat 10 us, pow 13000 mW, 600 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <SAMSUNG HS082HB>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
uep0 at uhub1 port 1
uep0: eGalax Inc. Touch, rev 1.10/1.00, addr 2
wsmouse0 at uep0 mux 0
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
rum0 at uhub4 port 6
rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address [_MAC_XXXXXXXXXX]
rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: RAPOO Rapoo 2.4G Wireless Device, rev 2.00/1.10, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: RAPOO Rapoo 2.4G Wireless Device, rev 2.00/1.10, addr 2, iclass 3/1
uhidev1: 186 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 186: input=31, output=31, feature=0
uhidev2 at uhub2 port 1 configuration 1 interface 2
uhidev2: RAPOO Rapoo 2.4G Wireless Device, rev 2.00/1.10, addr 2, iclass 3/1
ukbd0 at uhidev2
root file system type: ffs
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
ubt0 at uhub1 port 2
ubt0: Cambridge Silicon Radio Bluetooth USB Adapter, rev 2.00/48.39, addr 3
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
acpibat0: normal capacity on 'charge state'
DRM error in i915_irq_handler: pipe A underrun