Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-05-19 04:33:44
From: ax0n
Description: OpenBSD 6.1/Sparc64 on SunFire T2000
console is /virtual-devices@100/console@1 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2017 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.1 (GENERIC.MP) #58: Sat Apr 1 17:10:24 MDT 2017 xxx@xxx.xxx:/usr/src/sys/arch/sparc64/compile/GENERIC.MP real mem = 34225520640 (32640MB) avail mem = 33610334208 (32053MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: Sun Fire T200 cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu1 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu2 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu3 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu4 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu5 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu6 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu7 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu8 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu9 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu10 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu11 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu12 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu13 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu14 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu15 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu16 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu17 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu18 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu19 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu20 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu21 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu22 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu23 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu24 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu25 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu26 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu27 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu28 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu29 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu30 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu31 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz vbus0 at mainbus0 "flashprom" at vbus0 not configured cbus0 at vbus0 vldc0 at cbus0 vldcp0 at vldc0 chan 0x0: ivec 0x0, 0x1 channel "hvctl" "ldom-primary" at vldc0 chan 0x1 not configured "fmactl" at vldc0 chan 0x3 not configured vldc1 at cbus0 "ldmfma" at vldc1 chan 0x4 not configured vldc2 at cbus0 vldcp1 at vldc2 chan 0x14: ivec 0x28, 0x29 channel "spds" "system-management" at vldc2 chan 0xd not configured vcons0 at vbus0: ivec 0x111, console vrtc0 at vbus0 "fma" at vbus0 not configured "sunvts" at vbus0 not configured "sunmc" at vbus0 not configured "explorer" at vbus0 not configured "led" at vbus0 not configured "flashupdate" at vbus0 not configured "ncp" at vbus0 not configured vpci0 at mainbus0: bus 2 to 7, dvma map 80000000-ffffffff pci0 at vpci0 ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xbc pci1 at ppb0 bus 3 ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xbc pci2 at ppb1 bus 4 em0 at pci2 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x795, address xx:xx:xx:xx:xx:xx em1 at pci2 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x796, address xx:xx:xx:xx:xx:xx ppb2 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xbc pci3 at ppb2 bus 5 ppb3 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xbc: msi pci4 at ppb3 bus 6 ppb4 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xbc pci5 at ppb4 bus 7 mpi0 at pci5 dev 0 function 0 "Symbios Logic SAS1064E" rev 0x02: msi mpi0: UNUSED, firmware xxx.xxx.xxx.xxx scsibus1 at mpi0: 63 targets sym0 at scsibus1 targ 0 lun 0: <SEAGATE, ST914602SSUN146G, 0400> SCSI3 0/direct fixed naa.5000c500061f070b sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST914602SSUN146G, 0400> SCSI3 0/direct fixed naa.5000c500061f070b sd0: 140009MB, 512 bytes/sector, 286739329 sectors sym1 at scsibus1 targ 1 lun 0: <SEAGATE, ST914602SSUN146G, 0400> SCSI3 0/direct fixed naa.5000c500061f0d3b sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST914602SSUN146G, 0400> SCSI3 0/direct fixed naa.5000c500061f0d3b sd1: 140009MB, 512 bytes/sector, 286739329 sectors sd2 at scsibus1 targ 2 lun 0: <HITACHI, H101414SCSUN146G, SA23> SCSI3 0/direct fixed naa.5000cca0000c2b34 sd2: 140009MB, 512 bytes/sector, 286739329 sectors sym2 at scsibus1 targ 3 lun 0: <SEAGATE, ST914602SSUN146G, 0400> SCSI3 0/direct fixed naa.5000c5000546b3ef sd3 at scsibus0 targ 2 lun 0: <SEAGATE, ST914602SSUN146G, 0400> SCSI3 0/direct fixed naa.5000c5000546b3ef sd3: 140009MB, 512 bytes/sector, 286739329 sectors vpci1 at mainbus0: bus 2 to 9, dvma map 80000000-ffffffff pci6 at vpci1 ppb5 at pci6 dev 0 function 0 "PLX PEX 8532" rev 0xbc pci7 at ppb5 bus 3 ppb6 at pci7 dev 1 function 0 "PLX PEX 8532" rev 0xbc pci8 at ppb6 bus 4 ppb7 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci9 at ppb7 bus 5 ebus0 at pci9 dev 2 function 0 "Acer Labs M1533 ISA" rev 0x00 com0 at ebus0 addr 3f8-3ff ivec 0x2: ns16550a, 16 byte fifo ohci0 at pci9 dev 5 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c1, version 1.0, legacy support ohci1 at pci9 dev 6 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c3, version 1.0, legacy support pciide0 at pci9 dev 8 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x7c4 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <TEAC, DV-28SL, 1.0A> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) usb0 at ohci0: USB revision 1.0 uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 ppb8 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci10 at ppb8 bus 6 ppb9 at pci7 dev 2 function 0 "PLX PEX 8532" rev 0xbc pci11 at ppb9 bus 7 em2 at pci11 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x7d6, address xx:xx:xx:xx:xx:xx em3 at pci11 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x7d7, address xx:xx:xx:xx:xx:xx ppb10 at pci7 dev 8 function 0 "PLX PEX 8532" rev 0xbc: msi pci12 at ppb10 bus 8 ppb11 at pci7 dev 9 function 0 "PLX PEX 8532" rev 0xbc: msi pci13 at ppb11 bus 9 uhub2 at uhub1 port 1 configuration 1 interface 0 "Atmel UHB124 hub" rev 1.10/3.00 addr 2 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets bootpath: /pci@780,0/pci@0,0/pci@9,0/scsi@0,0/disk@0,0