Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-08-10 11:01:05
From: Thoral
Description: Lenovo Thinkpad T430
Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0) VT(vga): resolution 640x480 info: [drm] Initialized drm 1.1.0 20060810 module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko Module mmc/mmcsd failed to register: 17 CPU: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (2893.49-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28000800<SYSCALL,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3752247296 (3578 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-G1 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1446744692 Hz quality 1000 Cuse v0.1.34 @ /dev/cuse random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO TP-G1> on motherboard acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x6000-0x607f mem 0xf0000000-0xf0ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 nvidia0: <NVS 5400M> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io vgapci1: <VGA-compatible display> port 0x7000-0x703f mem 0xf1400000-0xf17fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 acpi_video1: <ACPI video extension> on vgapci1 drmn1: <Intel IvyBridge (M)> on vgapci1 info: [drm] Memory usable by graphics device = 2048M intel_iicbb0 on drmn1 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iicbus1: <Philips I2C bus> on intel_gmbus0 iic1: <I2C generic I/O> on iicbus1 intel_iicbb1 on drmn1 iicbus2: <Philips I2C bus> on iicbb1 addr 0xff iic2: <I2C generic I/O> on iicbus2 iicbus3: <Philips I2C bus> on intel_gmbus1 iic3: <I2C generic I/O> on iicbus3 intel_iicbb2 on drmn1 iicbus4: <Philips I2C bus> on iicbb2 addr 0xff iic4: <I2C generic I/O> on iicbus4 iicbus5: <Philips I2C bus> on intel_gmbus2 iic5: <I2C generic I/O> on iicbus5 intel_iicbb3 on drmn1 iicbus6: <Philips I2C bus> on iicbb3 addr 0xff iic6: <I2C generic I/O> on iicbus6 iicbus7: <Philips I2C bus> on intel_gmbus3 iic7: <I2C generic I/O> on iicbus7 intel_iicbb4 on drmn1 iicbus8: <Philips I2C bus> on iicbb4 addr 0xff iic8: <I2C generic I/O> on iicbus8 iicbus9: <Philips I2C bus> on intel_gmbus4 iic9: <I2C generic I/O> on iicbus9 intel_iicbb5 on drmn1 iicbus10: <Philips I2C bus> on iicbb5 addr 0xff iic10: <I2C generic I/O> on iicbus10 iicbus11: <Philips I2C bus> on intel_gmbus5 iic11: <I2C generic I/O> on iicbus11 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. drmn1: taking over the fictitious range 0xe0000000-0xf0000000 info: [drm] Connector LVDS-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.LVDS-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode fbd1 on drmn1 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1 vgapci1: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf3920000-0xf392ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) uart2: <Intel Panther Point KT Controller> port 0x70b0-0x70b7 mem 0xf393c000-0xf393cfff irq 19 at device 22.3 on pci0 em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x7080-0x709f mem 0xf3900000-0xf391ffff,0xf393b000-0xf393bfff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf393a000-0xf393a3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac0: <Intel Panther Point HDA Controller> mem 0xf3930000-0xf3933fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib2 sdhci_pci0: <RICOH R5CE823 SD> mem 0xf3100000-0xf31000ff irq 16 at device 0.0 on pci2 sdhci_pci0: 1 slot(s) allocated pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 iwn0: <Intel Centrino Advanced-N 6205> mem 0xf3000000-0xf3001fff irq 17 at device 0.0 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib4: [GIANT-LOCKED] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf3939000-0xf39393ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0x70a8-0x70af,0x70bc-0x70bf,0x70a0-0x70a7,0x70b8-0x70bb,0x7060-0x707f mem 0xf3938000-0xf39387ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz0: _CRT value is absurd, ignored (200.1C) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec nvme cam probe device init hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 pcm1: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa0 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada0: quirks=0x2<NCQ_TRIM_BROKEN> Trying to mount root from zfs:zroot/ROOT/default []... cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <PLDS DVD-RW DS8A8SH KU51> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 8 ports with 8 removable, self powered info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off Root mount waiting for: usbus2 usbus1 usbus0 ugen0.2: <Logitech USB Receiver> at usbus0 ukbd0 on uhub0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0 kbd2 at ukbd0 uhub2: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered Root mount waiting for: usbus2 usbus1 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub3 on uhub2 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub4 on uhub1 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus2 usbus1 uhub4: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen1.3: <Chicony Electronics Co., Ltd. Integrated Camera> at usbus1 wlan0: Ethernet address: [_MAC_XXXXXXXXXX] iwn0: iwn_read_firmware: ucode rev=0x12a80601 wlan0: link state changed to UP ums0 on uhub0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0 on uhub0 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize()