Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-09-17 20:44:01
From: nielsk
Description: Thinkpad T460 OpenBSD 6.2-Beta
OpenBSD 6.2-beta (GENERIC.MP) #96: Fri Sep 15 08:43:20 MDT 2017 [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 7960838144 (7592MB) avail mem = 7712550912 (7355MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xd705a000 (65 entries) bios0: vendor LENOVO version "R06ET52W (1.26 )" date 06/01/2017 bios0: LENOVO 20FN003LGE acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP TCPA SSDT UEFI SSDT SSDT ECDT HPET APIC MCFG SSDT SSDT DBGP DBG2 BOOT BATB SLIC SSDT SSDT MSDM DMAR ASF! FPDT UEFI acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP8(S4) XHCI(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpihpet0 at acpi0: 23999999 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: TSC frequency 2400000000 Hz cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2400.00 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus 2 (EXP1) acpiprt5 at acpi0: bus 4 (EXP3) acpiprt6 at acpi0: bus -1 (EXP4) acpiprt7 at acpi0: bus -1 (EXP5) acpiprt8 at acpi0: bus -1 (EXP8) acpiprt9 at acpi0: bus -1 (RP09) acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI acpipwrres1 at acpi0: PG00, resource for PEG0 acpipwrres2 at acpi0: PG01, resource for PEG1 acpipwrres3 at acpi0: PG02, resource for PEG2 acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpitz0 at acpi0: critical temperature is 128 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "LEN0071" at acpi0 not configured "LEN2016" at acpi0 not configured "INT3F0D" at acpi0 not configured acpibat0 at acpi0: BAT0 model "45N1773" serial 3888 type LION oem "SANYO" acpibat1 at acpi0: BAT1 model "45N1775" serial 1912 type LION oem "SANYO" acpiac0 at acpi0: AC unit offline acpithinkpad0 at acpi0 "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x001b15d1 rev 0x10 "INT3394" at acpi0 not configured acpivideo0 at acpi0: GFX0 acpivout at acpivideo0 not configured cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2301, 2300, 2200, 2100, 2000, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07 drm0 at inteldrm0 inteldrm0: msi error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22) error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored) inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1 ahci0: port 1: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 1 lun 0: <ATA, SanDisk SD8TB8U2, X412> SCSI3 0/direct fixed naa.5001b444a69cc8fb sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi pci1 at ppb0 bus 2 rtsx0 at pci1 dev 0 function 0 "Realtek RTS522A Card Reader" rev 0x01: msi sdmmc0 at rtsx0: 4-bit ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi pci2 at ppb1 bus 4 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a, msi pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21 "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16 iic0 at ichiic0 em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi, address [_MAC_XXXXXXXXXX] isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x943300 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT ugen0 at uhub0 port 5 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 2 ugen0: setting configuration index 0 failed ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 3 ugen2 at uhub0 port 9 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 4 uvideo0 at uhub0 port 10 configuration 1 interface 0 "SunplusIT Inc Integrated Camera" rev 2.00/0.12 addr 5 video0 at uvideo0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets softraid0: sd1 was not shutdown properly sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd1: 243163MB, 512 bytes/sector, 497998407 sectors root on sd1a (fd16448d6f3235eb.a) swap on sd1b dump on sd1b WARNING: / was not properly unmounted iwm0: hw rev 0x200, fw ver 16.242414.0, address [_MAC_XXXXXXXXXX] error: [drm:pid10515:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A acpivideo0: unknown event 0x00 ugen0 detached ugen1 detached ugen2 detached video0 detached uvideo0 detached uhub0 detached azalia0: CORB is not running. azalia0: CORB is not running. uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 error: [drm:pid56139:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored) ugen0 at uhub0 port 5 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 2 ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 3 ugen2 at uhub0 port 9 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 4 uvideo0 at uhub0 port 10 configuration 1 interface 0 "SunplusIT Inc Integrated Camera" rev 2.00/0.12 addr 5 video0 at uvideo0 acpivideo0: unknown event 0x00 ugen0 detached ugen1 detached ugen2 detached video0 detached uvideo0 detached uhub0 detached azalia0: CORB is not running. azalia0: CORB is not running. uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 error: [drm:pid56139:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored) ugen0 at uhub0 port 5 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 2 ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 3 ugen2 at uhub0 port 9 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 4 uvideo0 at uhub0 port 10 configuration 1 interface 0 "SunplusIT Inc Integrated Camera" rev 2.00/0.12 addr 5 video0 at uvideo0 acpivideo0: unknown event 0x00 ugen0 detached ugen1 detached ugen2 detached video0 detached uvideo0 detached uhub0 detached azalia0: CORB is not running. azalia0: CORB is not running. uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 error: [drm:pid56139:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored) ugen0 at uhub0 port 5 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 2 ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 3 ugen2 at uhub0 port 9 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 4 uvideo0 at uhub0 port 10 configuration 1 interface 0 "SunplusIT Inc Integrated Camera" rev 2.00/0.12 addr 5 video0 at uvideo0