Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-09-23 16:25:35
From: op
Description: HardenedBSD 11-STABLE
[1] Copyright (c) 2013-2017 The HardenedBSD Project. [1] Copyright (c) 1992-2017 The FreeBSD Project. [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [1] The Regents of the University of California. All rights reserved. [1] FreeBSD is a registered trademark of The FreeBSD Foundation. [1] FreeBSD 11.1-STABLE-HBSD #39 r323153+acbeca1cc7a5(op/hardenedbsd/11-stable/master)-dirty: Fri Sep 22 20:57:28 CEST 2017 [1] root@opn:/usr/obj/usr/src/sys/OP-HBSD amd64 [1] FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0) [1] VT(vga): resolution 640x480 [1] HardenedBSD: initialize and check features (__HardenedBSD_version 1100049 __FreeBSD_version 1101502). [1] info: [drm] Initialized drm 1.1.0 20060810 [1] CPU: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (2294.74-MHz K8-class CPU) [1] Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [1] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [1] AMD Features2=0x21<LAHF,ABM> [1] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [1] XSAVE Features=0x1<XSAVEOPT> [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [1] TSC: P-state invariant, performance statistics [1] real memory = 4294967296 (4096 MB) [1] avail memory = 3984289792 (3799 MB) [1] Event timer "LAPIC" quality 600 [1] ACPI APIC Table: <HPQOEM 1946 > [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [1] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [1] random: unblocking device. [1] ioapic0 <Version 2.0> irqs 0-39 on motherboard [1] random: entropy device external interface [1] kbd1 at kbdmux0 [1] random: registering fast source Intel Secure Key RNG [1] random: fast provider: "Intel Secure Key RNG" [1] nexus0 [1] vtvga0: <VT VGA driver> on motherboard [1] aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard [1] cryptosoft0: <software crypto> on motherboard [1] acpi0: <HPQOEM SLIC-MPC> on motherboard [1] acpi0: Power Button (fixed) [1] cpu0: <ACPI CPU> on acpi0 [1] cpu1: <ACPI CPU> on acpi0 [1] cpu2: <ACPI CPU> on acpi0 [1] cpu3: <ACPI CPU> on acpi0 [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [1] Event timer "HPET" frequency 14318180 Hz quality 550 [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [1] Event timer "HPET3" frequency 14318180 Hz quality 440 [1] Event timer "HPET4" frequency 14318180 Hz quality 440 [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [1] atrtc0: Warning: Couldn't map I/O. [1] Event timer "RTC" frequency 32768 Hz quality 0 [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [1] Event timer "i8254" frequency 1193182 Hz quality 100 [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [1] acpi_ec0: <Embedded Controller: GPE 0x6> port 0x62,0x66 on acpi0 [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [1] pci0: <ACPI PCI bus> on pcib0 [1] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [1] vgapci0: Boot video device [1] hdac0: <Intel Haswell HDA Controller> mem 0xd0910000-0xd0913fff irq 16 at device 3.0 on pci0 [1] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd0900000-0xd090ffff irq 16 at device 20.0 on pci0 [1] xhci0: 32 bytes context size, 64-bit DMA [1] xhci0: Port routing mask set to 0xffffffff [1] usbus0 on xhci0 [1] pci0: <simple comms> at device 22.0 (no driver attached) [1] hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xd0914000-0xd0917fff irq 22 at device 27.0 on pci0 [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [1] pci1: <ACPI PCI bus> on pcib1 [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [1] pci2: <ACPI PCI bus> on pcib2 [1] pci2: <unknown> at device 0.0 (no driver attached) [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [1] pci3: <ACPI PCI bus> on pcib3 [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xd0600000-0xd0600fff,0xd0400000-0xd0403fff irq 18 at device 0.0 on pci3 [1] re0: Using 1 MSI-X message [1] re0: turning off MSI enable bit. [1] re0: ASPM disabled [1] re0: Chip rev. 0x4c000000 [1] re0: MAC rev. 0x00000000 [1] miibus0: <MII bus> on re0 [1] rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [1] re0: Using defaults for TSO: 65518/35/2048 [1] re0: Ethernet address: a0:1d:48:XX:XX:XX [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [1] pci4: <ACPI PCI bus> on pcib4 [1] ath0: <Qualcomm Atheros AR9565> mem 0xd0500000-0xd057ffff irq 19 at device 0.0 on pci4 [1] ath0: WB335 1-ANT card detected [1] ath0: Bluetooth Antenna Diversity card detected [1] ar9300_attach: calling ar9300_hw_attach [1] ar9300_hw_attach: calling ar9300_eeprom_attach [1] ar9300_flash_map: unimplemented for now [1] Restoring Cal data from DRAM [1] Restoring Cal data from EEPROM [1] Restoring Cal data from Flash [1] Restoring Cal data from Flash [1] Restoring Cal data from OTP [1] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [1] ath0: [HT] enabling HT modes [1] ath0: [HT] enabling short-GI in 20MHz mode [1] ath0: [HT] 1 stream STBC receive enabled [1] ath0: [HT] 1 RX streams; 1 TX streams [1] ath0: QCA9565 mac 704.0 RF5110 phy 2929.9 [1] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [1] ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xd091d000-0xd091d3ff irq 17 at device 29.0 on pci0 [1] usbus1: EHCI version 1.0 [1] usbus1 on ehci0 [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [1] isa0: <ISA bus> on isab0 [1] ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4060-0x407f mem 0xd091c000-0xd091c7ff irq 19 at device 31.2 on pci0 [1] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [1] battery0: <ACPI Control Method Battery> on acpi0 [1] acpi_acad0: <AC Adapter> on acpi0 [1] acpi_button0: <Sleep Button> on acpi0 [1] acpi_lid0: <Control Method Lid Switch> on acpi0 [1] acpi_tz0: <Thermal Zone> on acpi0 [1] acpi_tz1: <Thermal Zone> on acpi0 [1] acpi_tz2: <Thermal Zone> on acpi0 [1] acpi_tz3: <Thermal Zone> on acpi0 [1] acpi_tz4: <Thermal Zone> on acpi0 [1] acpi_tz5: <Thermal Zone> on acpi0 [1] acpi_tz6: <Thermal Zone> on acpi0 [1] acpi_tz7: <Thermal Zone> on acpi0 [1] acpi_syscontainer0: <System Container> on acpi0 [1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [1] kbd0 at atkbd0 [1] atkbd0: [GIANT-LOCKED] [1] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [1] psm0: [GIANT-LOCKED] [1] psm0: model Synaptics Touchpad, device ID 0 [1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [1] coretemp1: <CPU On-Die Thermal Sensors> on cpu1 [1] est1: <Enhanced SpeedStep Frequency Control> on cpu1 [1] coretemp2: <CPU On-Die Thermal Sensors> on cpu2 [1] est2: <Enhanced SpeedStep Frequency Control> on cpu2 [1] coretemp3: <CPU On-Die Thermal Sensors> on cpu3 [1] est3: <Enhanced SpeedStep Frequency Control> on cpu3 [1] Timecounters tick every 10.000 msec [1] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled [1] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [1] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [1] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [1] hdacc1: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac1 [1] hdaa1: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc1 [1] pcm1: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12 on hdaa1 [1] pcm2: <IDT 92HD91BXX (Analog Mic)> at nid 17 on hdaa1 [1] usbus0: 5.0Gbps Super Speed USB v3.0 [1] usbus1: 480Mbps High Speed USB v2.0 [1] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [1] ugen1.1: <Intel EHCI root HUB> at usbus1 [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [1] ada0: <ST500LT012-1DG142 1002YAM1> ATA8-ACS SATA 3.x device [1] ada0: [_SERIAL_NUMBER_XXXXX] [1] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [1] ada0: Command Queueing enabled [1] ada0: 476940MB (976773168 512 byte sectors) [1] ada0: quirks=0x1<4K> [1] SMP: AP CPU #1 Launched! [1] SMP: AP CPU #2 Launched! [1] SMP: AP CPU #3 Launched! [1] Timecounter "TSC-low" frequency 1147371229 Hz quality 1000 [1] Trying to mount root from ufs:/dev/ada0s4a [rw]... [2] uhub0: 13 ports with 13 removable, self powered [2] uhub1: 2 ports with 2 removable, self powered [4] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [4] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [4] uhub2: 8 ports with 8 removable, self powered [16] wlan0: Ethernet address: 28:e3:47:XX:XX:XX [19] re0: link state changed to DOWN [19] wlan0: link state changed to UP