Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-09-23 19:35:45
From: schaafuit
Description: dmesg of OpenBSD i386 bsd on Thinkpad R40
OpenBSD 6.1 (GENERIC) #291: Sat Apr 1 13:49:08 MDT 2017
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1300MHz ("GenuineIntel" 686-class) 1.30 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,EST,TM2,PERF
real mem = 535707648 (510MB)
avail mem = 512741376 (488MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/15/03, BIOS32 rev. 0 @ 0xfd7b0, SMBIOS rev. 2.31 @ 0xe0010 (53 entries)
bios0: vendor IBM version "1PET46WW (1.14 )" date 07/15/2003
bios0: IBM 27223DG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
acpitz0 at acpi0: critical temperature is 97 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"IBM0057" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0400" at acpi0 not configured
"IBM0071" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "IBM-02K6928" serial 2694 type LION oem "Panasonic"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: Enhanced SpeedStep 1300 MHz: speeds: 1300, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: irq 11
ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq 11, address [_MAC_XXXXXXXXXX]
"TI TSB43AB21 FireWire" rev 0x00 at pci2 dev 7 function 0 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: irq 11, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4240N, 1202> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2100CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2100CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (f46aa9338c499cec.a) swap on wd0b dump on wd0b
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r100_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
ttm_pool_mm_shrink_fini stub
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r100_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeondrm0: 1024x768, 8bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wdc2 at pcmcia0 function 0 "TRANSCEND, TS64GCF400, " port 0x4000/16
wd1 at wdc2 channel 0 drive 0: <TS64GCF400>
wd1: 1-sector PIO, LBA48, 61064MB, 125059072 sectors
wd1(wdc2:0:0): using BIOS timings