Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-09-28 10:53:21
From: comb
Description: NetBSD 7.1 on Dell Latitude E6230
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1 (GENERIC.201703111743Z)
total memory = 16267 MB
avail memory = 15778 MB
kern.module.path=/stand/amd64/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Latitude E6230 (01)
mainbus0 (root)
ACPI: RSDP 0xf0490 000024 (v02 DELL )
ACPI: XSDT 0xd77f3080 000084 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0xd77fd700 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0xd77f3198 00A561 (v02 DELL CBX3 00000021 INTL 20091112)
ACPI: FACS 0xd8ffe080 000040
ACPI: APIC 0xd77fd810 000072 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0xd77fd888 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0xd77fd8d0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0xd77fd910 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0xd77fd948 000415 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0xd77fdd60 0009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0xd77fe720 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0xd77ff248 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 0xd77ff300 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SLIC 0xd77ff3a8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: BGRT 0xd77ff520 000038 (v00 ?? 01072009 AMI 00010013)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
cpu2 at mainbus0 apid 1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
cpu3 at mainbus0 apid 3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, id 0x306a9
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <DELL , CBX3 ,01072009>, AslId <AMI ,00010013>
ACPI: SSDT 0xdac84598 000523 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x0 000523 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0xdac85a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0xdac8bc18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (ECDV, PNP0C09-0)
: io 0x930,0x934
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, DLLK0532) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, DLL0532) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
acpiout2 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
acpiout3 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
acpiout4 at acpivga0 (DVI3, 0x0304): ACPI Display Output Device
acpiout5 at acpivga0 (DP, 0x0300): ACPI Display Output Device
acpiout6 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
acpiout7 at acpivga0 (DP3, 0x0305): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0: 0x0302 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0303 (acpiout3): Unknown Output Device, head 0
acpivga0: 0x0300 (acpiout5): Unknown Output Device, head 0
acpivga0: 0x0301 (acpiout6): Unknown Output Device, head 0
acpivga0: 0x0304 (acpiout4): Unknown Output Device, head 0
acpivga0: 0x0305 (acpiout7): Unknown Output Device, head 0
A_CC (SMO8810) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings
MEM2 (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: LGC-LGC2.2 LION rechargeable battery
acpibat0: granularity: low->warn 0.044 Ah, warn->full 0.044 Ah
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
RBTN (DELLABCE) at acpi0 not configured
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 107.0 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0154 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0166 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80011c8e1000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x1e31 (USB serial bus, xHCI, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Sigmatel product 0x76df
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Jack & Built-In]
hdafg0: DAC03 2ch: Speaker [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: Intel product 0x2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: DP02 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x1e10 (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x1e12 (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x4359 (miscellaneous network) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x1e14 (rev. 0xc4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x1e16 (rev. 0xc4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci4 at ppb3 bus 7
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 5: vendor 0x8086 product 0x1e1a (rev. 0xc4)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 11
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci5 dev 0 function 0: vendor 0x1217 product 0x8221 (rev. 0x05)
sdhc0: interrupting at ioapic0 pin 17
sdhc0: SD Host Specification 2.0, rev.192
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 21
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1e55 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x282a (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 4
atabus2 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x32041114 rev 0x40
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 59 us, pow 500 mW
acpicpu0: C3: FFH, lat 87 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2601 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2600 MHz
acpicpu0: P2: FFH, lat 10 us, pow 33218 mW, 2500 MHz
acpicpu0: P3: FFH, lat 10 us, pow 31470 mW, 2400 MHz
acpicpu0: P4: FFH, lat 10 us, pow 29755 mW, 2300 MHz
acpicpu0: P5: FFH, lat 10 us, pow 28074 mW, 2200 MHz
acpicpu0: P6: FFH, lat 10 us, pow 26426 mW, 2100 MHz
acpicpu0: P7: FFH, lat 10 us, pow 24816 mW, 2000 MHz
acpicpu0: P8: FFH, lat 10 us, pow 23556 mW, 1900 MHz
acpicpu0: P9: FFH, lat 10 us, pow 22002 mW, 1800 MHz
acpicpu0: P10: FFH, lat 10 us, pow 20480 mW, 1700 MHz
acpicpu0: P11: FFH, lat 10 us, pow 18989 mW, 1600 MHz
acpicpu0: P12: FFH, lat 10 us, pow 17534 mW, 1500 MHz
acpicpu0: P13: FFH, lat 10 us, pow 16106 mW, 1400 MHz
acpicpu0: P14: FFH, lat 10 us, pow 15009 mW, 1300 MHz
acpicpu0: P15: FFH, lat 10 us, pow 13638 mW, 1200 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2591804280 Hz quality 3000
IPsec: Initialized Security Association Processing.
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
wd0 at atabus0 drive 0
wd0: <WDC WDS120G1G0A-00SS50>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0 at uhub3 port 4
ugen0: Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 3
ugen1 at uhub2 port 8
ugen1: Broadcom Corp 5880, rev 1.10/1.01, addr 3
uvideo0 at uhub3 port 5 configuration 1 interface 0: CN0Y4TWT7248723RAK3VA00 Laptop_Integrated_Webcam_E4HD, rev 2.00/22.08, addr 4
video0 at uvideo0: CN0Y4TWT7248723RAK3VA00 Laptop_Integrated_Webcam_E4HD, rev 2.00/22.08, addr 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)