Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-10-29 22:04:38
From: Sevan / Venture37
Description: HP Z400 Workstation (VS933AV), nVidia Quadro FX3800
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.4 (GENERIC) #0: Sat Oct 21 22:03:01 UTC 2017
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3063 MB
avail memory = 2952 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Z400 Workstation ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000E9010 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BF7B88E8 000064 (v01 HPQOEM SLIC-WKS 20101029 00000000)
ACPI: FACP 0x00000000BF7B8A88 0000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20170831/tbfadt-642)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170831/tbfadt-642)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20170831/tbfadt-745)
ACPI: DSDT 0x00000000BF7B90A3 00A2BD (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0x00000000BF7B8800 000040
ACPI: APIC 0x00000000BF7B8B7C 000108 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: ASF! 0x00000000BF7B8C84 000063 (v32 HPQOEM TYLSBURG 00000001 00000000)
ACPI: MCFG 0x00000000BF7B8CE7 00003C (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: TCPA 0x00000000BF7B8D23 000032 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: HPET 0x00000000BF7B8ECB 000038 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DMAR 0x00000000BF7B8F03 000170 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SSDT 0x00000000BF7C4A4F 00276C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfec10000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu3: package 0, core 3, smt 0
cpu4 at mainbus0 apid 1
cpu4: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu4: package 0, core 0, smt 1
cpu5 at mainbus0 apid 3
cpu5: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu5: package 0, core 1, smt 1
cpu6 at mainbus0 apid 5
cpu6: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu6: package 0, core 2, smt 1
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz, id 0x106a5
cpu7: package 0, core 3, smt 1
acpi0 at mainbus0: Intel ACPICA 20170831
acpi0: X/RSDT: OemId <HPQOEM,SLIC-WKS,20101029>, AslId < ,00000000>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
FDC0 (PNP0700) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
SBD1 (PNP0C02) at acpi0 not configured
SBD2 (PNP0C02) at acpi0 not configured
SBD3 (PNP0C02) at acpi0 not configured
VTD1 (PNP0C01) at acpi0 not configured
MBRD (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
ACPI: Enabled 1 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 3405 (rev. 0x13)
ppb0 at pci0 dev 1 function 0: vendor 8086 product 3408 (rev. 0x13)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 0: vendor 8086 product 340a (rev. 0x13)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
pci2 at ppb1 bus 15
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 7 function 0: vendor 8086 product 340e (rev. 0x13)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
ppb2: link is x16 @ 2.5GT/s
pci3 at ppb2 bus 40
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci3 dev 0 function 0: vendor 10de product 05ff (rev. 0xa1)
drm kern info: nouveau [ DEVICE][nouveau0] BOOT0 : 0x0a0f80b1
drm kern info: nouveau [ DEVICE][nouveau0] Chipset: G200 (NVA0)
drm kern info: nouveau [ DEVICE][nouveau0] Family : NV50
drm kern info: nouveau [ VBIOS][nouveau0] checking PRAMIN for image...
drm kern info: nouveau [ VBIOS][nouveau0] ... appears to be valid
drm kern info: nouveau [ VBIOS][nouveau0] using image from PRAMIN
drm kern info: nouveau [ VBIOS][nouveau0] BIT signature found
drm kern info: nouveau [ VBIOS][nouveau0] version 62.00.6f.00.03
nouveau0: interrupting at ioapic1 pin 6 (nouveau)
drm kern info: nouveau [ PFB][nouveau0] RAM type: GDDR3
drm kern info: nouveau [ PFB][nouveau0] RAM size: 1024 MiB
drm kern info: nouveau [ PFB][nouveau0] ZCOMP: 2688 tags
drm kern info: nouveau [ VOLT][nouveau0] GPU voltage: 1050000uv
drm kern info: nouveau [ PTHERM][nouveau0] FAN control: none / external
drm kern info: nouveau [ PTHERM][nouveau0] fan management: automatic
drm kern info: nouveau [ PTHERM][nouveau0] internal sensor: yes
drm kern info: nouveau [ CLK][nouveau0] 03: core 300 MHz shader 600 MHz memory 100 MHz
drm kern info: nouveau [ CLK][nouveau0] 07: core 400 MHz shader 800 MHz memory 300 MHz
drm kern info: nouveau [ CLK][nouveau0] 0f: core 600 MHz shader 1204 MHz memory 800 MHz
drm kern info: nouveau [ CLK][nouveau0] --: core 370 MHz shader 750 MHz memory 297 MHz
Zone kernel: Available graphics memory: 1041648 kiB
drm kern info: nouveau [ DRM] VRAM: 1024 MiB
drm kern info: nouveau [ DRM] GART: 1048576 MiB
drm kern info: nouveau [ DRM] TMDS table version 2.0
drm kern info: nouveau [ DRM] DCB version 4.0
drm kern info: nouveau [ DRM] DCB outp 00: 04000320 00000028
drm kern info: nouveau [ DRM] DCB outp 01: 01000322 00020030
drm kern info: nouveau [ DRM] DCB outp 02: 01121336 0f220e00
drm kern info: nouveau [ DRM] DCB outp 03: 01121332 00020e00
drm kern info: nouveau [ DRM] DCB outp 04: 02132336 0f220d00
drm kern info: nouveau [ DRM] DCB outp 05: 02132332 00020d00
drm kern info: nouveau [ DRM] DCB conn 00: 00001030
drm kern info: nouveau [ DRM] DCB conn 01: 0000a146
drm kern info: nouveau [ DRM] DCB conn 02: 00050246
drm kern info: nouveau [ DRM] DCB conn 03: 00000360
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
drm kern info: nouveau [ DRM] MM: using CRYPT for buffer copies
nouveaufb0 at nouveau0
nouveau0: info: registered panic notifier
nouveaufb0: framebuffer at 0xffff8000397f2000, size 1280x1024, depth 32, stride 5120
wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 3425 (interrupt system, generic 8259, revision 0x13) at pci0 dev 16 function 0 not configured
vendor 8086 product 3426 (interrupt system, generic 8259, revision 0x13) at pci0 dev 16 function 1 not configured
vendor 8086 product 3427 (interrupt system, generic 8259, revision 0x13) at pci0 dev 17 function 0 not configured
vendor 8086 product 3428 (interrupt system, generic 8259, revision 0x13) at pci0 dev 17 function 1 not configured
vendor 8086 product 342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured
vendor 8086 product 3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured
vendor 8086 product 3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured
vendor 8086 product 342f (interrupt system, IO(x) APIC, revision 0x13) at pci0 dev 21 function 0 not configured
uhci0 at pci0 dev 26 function 0: vendor 8086 product 3a37 (rev. 0x00)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 3a38 (rev. 0x00)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 3a39 (rev. 0x00)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 3a3c (rev. 0x00)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0262
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: DAC03 2ch: HP Out [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb3 at pci0 dev 28 function 0: vendor 8086 product 3a40 (rev. 0x00)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci4 at ppb3 bus 28
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 5: vendor 8086 product 3a4a (rev. 0x00)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci5 dev 0 function 0: Broadcom BCM5764 Gigabit Ethernet
bge0: interrupting at msi1 vec 0
bge0: HW config 00000014, 00000004, 00000000, 00000000 00000000
bge0: ASIC BCM5784 B0 (0x5784100), Ethernet address [_MAC_XXXXXXXXXX]
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci3 at pci0 dev 29 function 0: vendor 8086 product 3a34 (rev. 0x00)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 3a35 (rev. 0x00)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 3a36 (rev. 0x00)
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 3a3a (rev. 0x00)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x90)
pci6 at ppb5 bus 55
pci6: i/o space, memory space enabled
fwohci0 at pci6 dev 5 function 0: vendor 11c1 product 5811 (rev. 0x70)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:7e:b7
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3a16 (rev. 0x00)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2822 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xe722ffa5<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pci7 at mainbus0 bus 63
pci7: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci7 dev 0 function 0: vendor 8086 product 2c41 (rev. 0x05)
pchb2 at pci7 dev 0 function 1: vendor 8086 product 2c01 (rev. 0x05)
pchb3 at pci7 dev 2 function 0: vendor 8086 product 2c10 (rev. 0x05)
pchb4 at pci7 dev 2 function 1: vendor 8086 product 2c11 (rev. 0x05)
pchb5 at pci7 dev 3 function 0: vendor 8086 product 2c18 (rev. 0x05)
pchb6 at pci7 dev 3 function 1: vendor 8086 product 2c19 (rev. 0x05)
pchb7 at pci7 dev 3 function 4: vendor 8086 product 2c1c (rev. 0x05)
pchb8 at pci7 dev 4 function 0: vendor 8086 product 2c20 (rev. 0x05)
pchb9 at pci7 dev 4 function 1: vendor 8086 product 2c21 (rev. 0x05)
pchb10 at pci7 dev 4 function 2: vendor 8086 product 2c22 (rev. 0x05)
pchb11 at pci7 dev 4 function 3: vendor 8086 product 2c23 (rev. 0x05)
pchb12 at pci7 dev 5 function 0: vendor 8086 product 2c28 (rev. 0x05)
pchb13 at pci7 dev 5 function 1: vendor 8086 product 2c29 (rev. 0x05)
pchb14 at pci7 dev 5 function 2: vendor 8086 product 2c2a (rev. 0x05)
pchb15 at pci7 dev 5 function 3: vendor 8086 product 2c2b (rev. 0x05)
pchb16 at pci7 dev 6 function 0: vendor 8086 product 2c30 (rev. 0x05)
pchb17 at pci7 dev 6 function 1: vendor 8086 product 2c31 (rev. 0x05)
pchb18 at pci7 dev 6 function 2: vendor 8086 product 2c32 (rev. 0x05)
pchb19 at pci7 dev 6 function 3: vendor 8086 product 2c33 (rev. 0x05)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 64 us, pow 500 mW
acpicpu0: C3: FFH, lat 96 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 130000 mW, 3060 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 130000 mW, 3059 MHz
acpicpu0: P2: FFH, lat 10 us, pow 130000 mW, 2926 MHz
acpicpu0: P3: FFH, lat 10 us, pow 109000 mW, 2793 MHz
acpicpu0: P4: FFH, lat 10 us, pow 100000 mW, 2660 MHz
acpicpu0: P5: FFH, lat 10 us, pow 83000 mW, 2527 MHz
acpicpu0: P6: FFH, lat 10 us, pow 76000 mW, 2394 MHz
acpicpu0: P7: FFH, lat 10 us, pow 69000 mW, 2261 MHz
acpicpu0: P8: FFH, lat 10 us, pow 57000 mW, 2128 MHz
acpicpu0: P9: FFH, lat 10 us, pow 52000 mW, 1995 MHz
acpicpu0: P10: FFH, lat 10 us, pow 47000 mW, 1862 MHz
acpicpu0: P11: FFH, lat 10 us, pow 40000 mW, 1729 MHz
acpicpu0: P12: FFH, lat 10 us, pow 36000 mW, 1596 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
drm kern error: nouveau E[ PDISP][nouveau0] INVALID_STATE [UNK0B] chid 1 mthd 0x0080 data 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] Base 0:
drm kern error: nouveau E[ PDISP][nouveau0] 0x0084: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0088: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x008c: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0090: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0094: 0x00000000 -> 0xcafe0000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00a0: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00a4: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00c0: 0x00000000 -> 0x01000003
drm kern error: nouveau E[ PDISP][nouveau0] 0x00c4: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00c8: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00cc: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00e0: 0x00000000 -> 0x40000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00e4: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00e8: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00ec: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00fc: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0100: 0xfffe0000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0104: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0110: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0114: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] Base 0 - Image 0:
drm kern error: nouveau E[ PDISP][nouveau0] 0x0800: 0x00000000 -> 0x00000500
drm kern error: nouveau E[ PDISP][nouveau0] 0x0804: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0808: 0x00000000 -> 0x04000500
drm kern error: nouveau E[ PDISP][nouveau0] 0x080c: 0x00000000 -> 0x00101400
drm kern error: nouveau E[ PDISP][nouveau0] 0x0810: 0x0000e900 -> 0x0000cf00
drm kern error: nouveau E[ PDISP][nouveau0] Base 0 - Image 1:
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c00: 0x00000000 -> 0x00000500
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c04: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c08: 0x00000000 -> 0x04000500
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c0c: 0x00000000 -> 0x00101400
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c10: 0x0000e900 -> 0x0000cf00
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3066784920 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD3000FYYZ-01UL1B3>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd1 at atabus1 drive 0
wd1: <WDC WD3000FYYZ-01UL1B3>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.4/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)