Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-10-31 07:55:11
From: herauthon
Description: DELL 160L - kernelmod
perma off : i915drmkms, radeondrmksfb
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1 (DELL-160L-X) #0: Sat Oct 28 16:34:29 UTC 2017
root@Legacy:/usr/src/sys/arch/i386/compile/DELL-160L-X
total memory = 503 MB
avail memory = 479 MB
kern.module.path=/stand/i386/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation OptiPlex 160L
mainbus0 (root)
ACPI: RSDP 0xfeb80 000014 (v00 DELL )
ACPI: RSDT 0xfd22a 000034 (v01 DELL 160L 00000007 ASL 00000061)
ACPI: FACP 0xfd25e 000074 (v01 DELL 160L 00000007 ASL 00000061)
ACPI: DSDT 0xfffcc0f1 002404 (v01 DELL dt_ex 00001000 MSFT 0100000D)
ACPI: FACS 0x1f774000 000040
ACPI: SSDT 0xfffce4f5 0000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
ACPI: APIC 0xfd2d2 00006C (v01 DELL 160L 00000007 ASL 00000061)
ACPI: BOOT 0xfd33e 000028 (v01 DELL 160L 00000007 ASL 00000061)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 2.80GHz, id 0xf29
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <DELL , 160L ,00000007>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (VBTN, PNP0C0C): ACPI Power Button
MEM (PNP0C01) at acpi0 not configured
FPU (PNP0C04) at acpi0 not configured
pcppi1 at acpi0 (SPK, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
fdc1 at acpi0 (FDC, PNP0700): io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc1: failed to evaluate _FDE: AE_NOT_FOUND
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
MBIO (PNP0C01) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2560 (rev. 0x01)
agp0 at pchb0: i830-family chipset
agp0: detected 892k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2562 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x81)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
re0 at pci1 dev 4 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 3
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pci_mem_find: expected type mem, found i/o
viaide0 at pci1 dev 5 function 0: VIA Technologies VT6421 Serial ATA RAID Controller (rev. 0x50)
viaide0: bus-master DMA support present
viaide0: using ioapic0 pin 17 for native-PCI interrupt
atabus0 at viaide0 channel 0
atabus1 at viaide0 channel 1
atabus2 at viaide0 channel 2
esiop0 at pci1 dev 6 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ioapic0 pin 18
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci1 dev 6 function 1: Symbios Logic 53c875 (ultra-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ioapic0 pin 19
scsibus1 at esiop1: 16 targets, 8 luns per target
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24c0 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801DB IDE Controller (ICH4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus3 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24c3 (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0
IPsec: Initialized Security Association Processing.
wd0: <SAMSUNG HD252HJ>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SC-140F, , FG04> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
sd0 at scsibus0 target 0 lun 0: <HP 36.4G, ST336753LC, HPC4> disk fixed
sd0: 34732 MB, 31310 cyl, 4 head, 567 sec, 512 bytes/sect x 71132960 sectors
sd0: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
fd1 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)