Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-11-02 00:48:40
From: Sevan / Venture37
Description: PowerBook G4 1.25Ghz FW800 (PowerBook5,2), No HDD or Airport card installed
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.2 (INSTALL) #0: Thu Sep 7 18:57:47 UTC 2017
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/INSTALL
total memory = 256 MB
avail memory = 239 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f2000000/mac-io@17/ata-3@20000/disk@0:0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 7457 (Revision 1.1), ID 0 (primary)
cpu0: HID0 0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1
cpu0: 767.99 MHz, 512KB L2 cache no parity parity enabled
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 106b product 0034 (rev. 0x00)
genfb0 at pci0 dev 16 function 0: vendor 1002 product 4e50 (rev. 0x00)
genfb0: framebuffer at 0xbc008000, size 1280x854, depth 8, stride 1280
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: vendor 106b product 0035 (rev. 0x00)
cbb0 at pci1 dev 19 function 0: vendor 104c product ac56 (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
pmu0 at obio0 offset 0x16000 irq 47: rev. 12
pmu0: initializing IIC bus
iic at pmu0 not configured
pmu0: initializing RTC
pmu0: initializing ADB
nadb0 at pmu0: Apple Desktop Bus
pmu0: power-mgt not configured
wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: vendor 106b product 003f (rev. 0x00)
ohci0: memory access is disabled
ohci1 at pci1 dev 25 function 0: vendor 106b product 003f (rev. 0x00)
ohci1: memory access is disabled
ohci2 at pci1 dev 26 function 0: vendor 106b product 003f (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
ohci3 at pci1 dev 27 function 0: vendor 1033 product 0035 (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
ohci4 at pci1 dev 27 function 1: vendor 1033 product 0035 (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
vendor 1033 product 00e0 (USB serial bus, EHCI, revision 0x04) at pci1 dev 27 function 2 not configured
cbb0: cacheline 0x8 lattimer 0x10
cbb0: bhlc 0x21008
cbb0: interrupting at irq 53
cardslot0 at cbb0
cardbus0 at cardslot0: bus 1
pcmcia0 at cardslot0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: vendor 106b product 0036 (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
vendor 106b product 0031 (IEEE1394 serial bus, OpenHCI, revision 0x81) at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0: vendor 106b product 0032 (rev. 0x80)
gem0: interrupting at irq 41
ukphy0 at gem0 phy 0: OUI 0x000ac2, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gem0: Ethernet address [_MAC_XXXXXXXXXX], 10KB RX fifo, 4KB TX fifo
vmmask 7fc00000 schedmask 7fc00000 highmask 7fc00000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 18432000 Hz quality 100
uhub0 at usb0: vendor 106b (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1033 (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 1033 (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-R UJ-816, , DXJ3> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
adbkbd0 at nadb0 addr 2: iBook keyboard
wskbd0 at adbkbd0 mux 1
wskbd0: connecting to wsdisplay0
nadb0: ADB relative pointing device not configured
nadb0: something from address 7:1f not configured
WARNING: 2 errors while detecting hardware; check system log.
boot device: <unknown>
md0: internal 2560 KB image area
root on md0a dumps on md0b
root file system type: ffs
kern.module.path=/stand/macppc/8.99.2/modules
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009d)
pmu0: got garbage from rtc (0000009e)
pmu0: unable to get a sane time value
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
uhub1: device problem, disabling port 1