Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-11-19 23:05:03
From: coypu
Description: LinkIt Smart 7688 MT7628
## Starting application at 0x00000000 ...
MIPS32/64 params: cpu arch: 128
MIPS32/64 params: TLB entries: 32
MIPS32/64 params: Icache: line=32, total=65536, ways=4, sets=512, colors=2
MIPS32/64 params: Dcache: line=32, total=32768, ways=4, sets=256, colors=1
phys segment: 0x8000000 @ 0
adding 0xe000 @ 0x2000 to freelist 0
adding 0x798c000 @ 0x674000 to freelist 0
Enabled early console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.7 (LINKITSMART7688) #0: Sun Nov 19 23:17:49 IST 2017
fly@localhost:/home/fly/mipsel/sys/arch/evbmips/compile/LINKITSMART7688
MT7628
total memory = 128 MB
avail memory = 120 MB
mainbus0 (root): Mediatek MT7628 System Bus
cpu0 at mainbus0: 580.00MHz (hz cycles = 2900000, delay divisor = 290)
cpu0: MIPS 24KE (0x19655) Rev. 85 with software emulated floating point
cpu0: 32 TLB entries, 256MB max page size
cpu0: 64KB/32B 4-way set-associative L1 instruction cache
cpu0: 32KB/32B 4-way set-associative write-back L1 data cache
rwdog0 at mainbus0: Ralink watchdog controller
rwdog0: max period 22 sec.
rwdog0: KTICKLE mode, period 10 sec.
rgpio0 at mainbus0: Ralink GPIO controller
gpio0 at rgpio0: 96 pins
ri2c0 at mainbus0: Ralink I2C controller
iic0 at ri2c0: I2C bus
com0 at mainbus0 addr 0x10000c00: ns16550a, working fifo
com1 at mainbus0 addr 0x10000d00: ns16550a, working fifo
com2 at mainbus0 addr 0x10000e00: ns16550a, working fifo
com2: console
ohci0 at mainbus0: OHCI USB controller
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at mainbus0: EHCI USB controller
ehci0: companion ohci0
ehci0: 1 companion controller, 1 port: ohci0
usb1 at ehci0: USB revision 2.0
reth0 at mainbus0: Ralink Ethernet
ukphy0 at reth0 phy 0: OUI 0x0017a5, model 0x0001, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rpci0 at mainbus0: Ralink PCIe Controller
uhub0 at usb0: Ralink (0x1814) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: Ralink (0x1814) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
root on reth0
nfs_boot: trying static
nfs_boot: client_addr=192.168.0.1
nfs_boot: gateway=192.168.0.1
nfs_boot: netmask=255.255.255.0
nfs_boot: server=192.168.0.5
nfs_boot: root=192.168.0.5:server:/path/to/root
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: sosend: 64
nfs_boot: sosend: 64
nfs_boot: sosend: 64
nfs_boot: mountd error=64
nfs_boot: mountd `192.168.0.5:server:/path/to/root', error=64
cannot mount root, error = 64
root device (default reth0):