Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-12-03 11:41:57
From: meka
Description: Intel i5 desktop
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p4 #0: Tue Nov 14 06:12:40 UTC 2017
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (3110.54-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28000800<SYSCALL,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8159924224 (7781 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1555270264 Hz quality 1000
Cuse v0.1.34 @ /dev/cuse
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
drmn0: <Intel SandyBridge> on vgapci0
info: [drm] Memory usable by graphics device = 2048M
info: [drm] MTRR allocation failed. Graphics performance may suffer.
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
intel_sdvo_ddc_proxy921920 on drmn0
intel_sdvo_ddc_proxy921920: detached
drm_iic_dp_aux0 on drmn0
drm_iic_dp_aux1 on drmn0
drmn0: taking over the fictitious range 0xc0000000-0xd0000000
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-2
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfe603000-0xfe6033ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <VIA ATA controller> port 0xe040-0xe047,0xe030-0xe033,0xe020-0xe027,0xe010-0xe013,0xe000-0xe00f irq 16 at device 0.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe400000-0xfe407fff irq 17 at device 0.0 on pci4
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 18 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib7
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfe602000-0xfe6023ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xfe601000-0xfe6017ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen1.1: <0x1b21 XHCI root HUB> at usbus1
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <ST3500320AS SD15> ATA8-ACS SATA 1.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:hal9000/ROOT/default []...
uhub0: 4 ports with 4 removable, self powered
ugen1.2: <Microchip Tech USB5734> at usbus1
uhub3 on uhub0
uhub3: <Microchip Tech USB5734, class 9/0, rev 3.10/1.28, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
uhub_attach: port 1 power on or off failed, USB_ERR_IOERROR
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub_attach: port 2 power on or off failed, USB_ERR_IOERROR
uhub_attach: port 3 power on or off failed, USB_ERR_IOERROR
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
uhub4: 6 ports with 6 removable, self powered
uhub_attach: port 4 power on or off failed, USB_ERR_IOERROR
uhub5: 8 ports with 8 removable, self powered
uhub_attach: port 5 power on or off failed, USB_ERR_IOERROR
ugen2.3: <PreSonus AudioBox 1818 VSL> at usbus2
uhub3: 5 ports with 4 removable, self powered
ugen2.4: <Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint> at usbus2
ukbd0 on uhub5
ukbd0: <Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint, class 0/0, rev 1.10/1.27, addr 4> on usbus2
kbd2 at ukbd0
ums0 on uhub5
ums0: <Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint, class 0/0, rev 1.10/1.27, addr 4> on usbus2
ums0: 3 buttons and [XY] coordinates ID=1
ugen1.3: <BEHRINGER X18XR18> at usbus1
GEOM_ELI: Device ada1p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
Root mount waiting for: usbus1
ugen1.4: <Microchip Tech USB2734> at usbus1
uhub6 on uhub0
uhub6: <Microchip Tech USB2734, class 9/0, rev 2.10/1.28, addr 3> on usbus1
uhub6: MTT enabled
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub6: 5 ports with 4 removable, self powered
ugen1.5: <Microchip Tech Hub Controller> at usbus1
ugen1.2: <Microchip Tech USB5734> at usbus1 (disconnected)
uhub3: at uhub0, port 2, addr 1 (disconnected)
uhub3: detached
bridge1: Ethernet address: [_MAC_XXXXXXXXXX]
re0: link state changed to DOWN
uaudio0 on uhub0
uaudio0: <X18XR18> on usbus1
uaudio1 on uhub5
uaudio1: <AudioBox 1818 VSL > on usbus2
uaudio0: Play: 48000 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 48000 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: MIDI sequencer.
pcm0: <USB audio> on uaudio0
uaudio0: No HID volume keys found.
uaudio1: Play: 96000 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 88200 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 48000 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 44100 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 96000 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 88200 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 48000 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 44100 Hz, 18 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio1: MIDI sequencer.
pcm1: <USB audio> on uaudio1
uaudio1: No HID volume keys found.
uhid0 on uhub6
uhid0: <HIDI2CBridge> on usbus1
pflog0: promiscuous mode enabled
re0: link state changed to UP
info: [drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6