Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-12-10 00:54:41
From: ryoon
Description: NetBSD/amd64 8.99.5 on HP ProBook 450 G1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.5 (GENERIC) #0: Wed Nov 1 09:47:53 UTC 2017
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3977 MB
avail memory = 3839 MB
cpu_rng: RDRAND
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP ProBook 450 G1 (A3009DF10303)
mainbus0 (root)
ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000B9FFE120 000094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 1942 00000001 HP 00000001)
ACPI: DSDT 0x00000000B9FD3000 023FEA (v02 HPQOEM 1942 00000001 INTL 20110112)
ACPI: FACS 0x00000000B9E31000 000040
ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 1942 00000001 HP 00000001)
ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 1942 00000001 HP 00000001)
ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 1942 00000001 HP 00000001)
ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 1942 00000001 HP 00000001)
ACPI: SSDT 0x00000000B9FD0000 000421 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
ACPI: SSDT 0x00000000B9FCF000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
ACPI: SLIC 0x00000000B9FCE000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: MSDM 0x00000000B9FCD000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
ACPI: FPDT 0x00000000B9FCC000 000044 (v01 HPQOEM 1942 00000001 HP 00000001)
ACPI: BGRT 0x00000000B9FCB000 000038 (v00 HPQOEM 1942 00000001 HP 00000001)
ACPI: SSDT 0x00000000B9FCA000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
ACPI: SSDT 0x00000000B9FC9000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
ACPI: SSDT 0x00000000B9FC8000 0006BD (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz, id 0x306c3
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz, id 0x306c3
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz, id 0x306c3
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz, id 0x306c3
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20170831
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE401071B2010 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010723A810 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE40107130CD0 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
WLBU (HPQ6001) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0-67,69-100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
LDR2 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, HPQ8001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN300F) (aux port): irq 12
ACEL (HPQ6007) at acpi0 not configured
MEM2 (PNP0C01) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LIon rechargeable battery
acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
HTAM (PNP0C02) at acpi0 not configured
acpitz0 at acpi0 (CPUZ)
acpitz0: levels: critical 128.0 C, hot 99.0 C, passive cooling
acpitz1 at acpi0 (GFXZ): cpu0
acpitz1: levels: critical 128.0 C, passive 105.0 C, passive cooling
acpitz2 at acpi0 (EXTZ)
acpitz2: levels: critical 128.0 C, passive cooling
acpitz3 at acpi0 (LOCZ)
acpitz3: levels: critical 128.0 C, passive cooling
acpitz4 at acpi0 (BATZ): cpu0
acpitz4: levels: critical 128.0 C, passive 55.0 C, passive cooling
acpitz5 at acpi0 (PCHZ)
acpitz5: levels: critical 128.0 C, passive cooling
acpitz6 at acpi0 (DM1Z)
acpitz6: levels: critical 128.0 C, passive cooling
acpitz7 at acpi0 (DM2Z)
acpitz7: levels: critical 128.0 C, passive cooling
PTID (INT340E) at acpi0 not configured
ACPI: Enabled 4 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.5
pms0: Extended W mode, Palm detect, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c04 (rev. 0x06)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0416 (rev. 0x06)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800046a89000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: timeout leaving reset state
hdaudio0: device driver failed to attach
xhci0 at pci0 dev 20 function 0: vendor 8086 product 8c31 (rev. 0x04)
xhci0: memory access is disabled
vendor 8086 product 8c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 8c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi0 vec 0
hdafg0 at hdaudio1: vendor 111d product 76e0
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Jack & Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 8c10 (rev. 0xd4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 5: vendor 8086 product 8c1a (rev. 0xd4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msi1 vec 0
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 6: vendor 8086 product 8c1c (rev. 0xd4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci3 dev 0 function 0: vendor 8086 product 08b3 (rev. 0x83)
iwm0: interrupting at msi2 vec 0
ppb3 at pci0 dev 28 function 7: vendor 8086 product 8c1e (rev. 0xd4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci4 dev 0 function 0: vendor 10ec product 5227 (rev. 0x01)
rtsx0: interrupting at msi3 vec 0
sdmmc0 at rtsx0
ehci1 at pci0 dev 29 function 0: vendor 8086 product 8c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 17
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8c4b (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8c03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 4
atabus1 at ahcisata0 channel 5
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 148 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 37000 mW, 2400 MHz
acpicpu0: P1: FFH, lat 10 us, pow 34750 mW, 2300 MHz
acpicpu0: P2: FFH, lat 10 us, pow 32906 mW, 2200 MHz
acpicpu0: P3: FFH, lat 10 us, pow 31098 mW, 2100 MHz
acpicpu0: P4: FFH, lat 10 us, pow 29325 mW, 2000 MHz
acpicpu0: P5: FFH, lat 10 us, pow 27587 mW, 1900 MHz
acpicpu0: P6: FFH, lat 10 us, pow 25889 mW, 1800 MHz
acpicpu0: P7: FFH, lat 10 us, pow 23879 mW, 1700 MHz
acpicpu0: P8: FFH, lat 10 us, pow 20651 mW, 1500 MHz
acpicpu0: P9: FFH, lat 10 us, pow 19087 mW, 1400 MHz
acpicpu0: P10: FFH, lat 10 us, pow 17560 mW, 1300 MHz
acpicpu0: P11: FFH, lat 10 us, pow 16062 mW, 1200 MHz
acpicpu0: P12: FFH, lat 10 us, pow 14280 mW, 1100 MHz
acpicpu0: P13: FFH, lat 10 us, pow 12851 mW, 1000 MHz
acpicpu0: P14: FFH, lat 10 us, pow 11454 mW, 900 MHz
acpicpu0: P15: FFH, lat 10 us, pow 10088 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
DRM error in intel_uncore_check_errors: Unclaimed register before interrupt
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394615640 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 4: device present, speed: 3.0Gb/s
ahcisata0 port 5: device present, speed: 1.5Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wd0 at atabus0 drive 0
wd0: <TOSHIBA MQ01ABF032>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), NCQ (32 tags)
wd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp CDDVDW SU-208FB, S11F6YFF302F7H, HH00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 8008 (0x8008), class 9/0, rev 2.00/0.04, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 8000 (0x8000), class 9/0, rev 2.00/0.04, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0 at uhub2 port 1
ugen0: vendor 138a (0x138a) product 003f (0x3f), rev 1.10/1.04, addr 3
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: SanDisk (0x781) Extreme (0x5580), rev 2.10/0.10, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Extreme, 0001> disk fixed
sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Logical Unit Is In Process Of Becoming Ready
sd0: drive offline
sd0: fabricating a geometry
sd0: 58313031 trailing sectors not covered by disklabel
ubt0 at uhub2 port 6
ubt0: vendor 8087 (0x8087) product 07dc (0x7dc), rev 2.00/0.01, addr 4
sd0: 58313031 trailing sectors not covered by disklabel
sd0: 58313031 trailing sectors not covered by disklabel
sd0: 58313031 trailing sectors not covered by disklabel
sd0: 58313031 trailing sectors not covered by disklabel
WARNING: 10 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.5/modules
iwm0: hw rev 0x160, fw ver 17.352738.0, address [_MAC_XXXXXXXXXX]
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ahcisata0 port 5: active 2 is 0x40000001 tfd 0x2051
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
ahcisata0 port 5: active 2 is 0x40000001 tfd 0x2051