Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2017-12-18 16:18:54
From: atari83
Description: Running FreeBSD 12.0 r326914 on Thinkpad E470 - Intel HD Graphics 620
$ cat /var/run/dmesg.boot 
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r326914: Sun Dec 17 23:30:54 +0330 2017
    root@hadi:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 5.0.1 (tags/RELEASE_501/final 320880) (based on LLVM 5.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 640x480
CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2904.13-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806e9  Family=0x6  Model=0x8e  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8122748928 (7746 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-R0D  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1452064218 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff80f8bbe0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-R0D> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x20, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xf4400000-0xf440ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xf4428000-0xf4429fff,0xf442e000-0xf442e0ff,0xf442c000-0xf442c7ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf3000000-0xf3ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
sdhci_pci0: <Generic SD HCI> mem 0xf4301000-0xf4301fff,0xf4300000-0xf43007ff at device 0.0 on pci2
sdhci_pci0: 1 slot(s) allocated
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pcib3: [GIANT-LOCKED]
pcib4: <ACPI PCI-PCI bridge> at device 29.2 on pci0
pci3: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf4204000-0xf4204fff,0xf4200000-0xf4203fff at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x50800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib5: <ACPI PCI-PCI bridge> at device 29.3 on pci0
pci4: <ACPI PCI bus> on pcib5
pci4: <network> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Kabylake-LP HDA Controller> mem 0xf4420000-0xf4423fff,0xf4410000-0xf441ffff at device 31.3 on pci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
hdacc0: <Conexant CX20753/4 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20753/4 Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20753/4 (Analog)> at nid 23 and 26 on hdaa0
pcm1: <Conexant CX20753/4 (Right Analog)> at nid 22 and 25 on hdaa0
hdacc1: <Intel Kabylake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kabylake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Kabylake (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD10JPVX-08JC3T6 08.01A08> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 18 ports with 18 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Ralink 802.11 n WLAN> at usbus0
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0cf3 product 0xe500> at usbus0
ugen0.4: <8SSC20F27029L1GZ71A06Y3 Integrated Camera> at usbus0
[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Memory usable by graphics device = 4096M
Failed to add WC MTRR for [0xd0000000-0xdfffffff]: -22; performance may suffer
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2
[drm] Connector eDP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.eDP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-2
[drm]   - kern.vt.fb.default_mode
[drm] GuC firmware load skipped
[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=4227072
pbase=0xd0180000 vbase=0xfffff800d0180000
name=drmn0 flags=0x0 stride=5504 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2
[drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1)
[drm] RC6 on
hdacc1: Unexpected unsolicited response with tag 63: ffffffff
hdacc1: Unexpected unsolicited response with tag 63: ffffffff
re0: link state changed to DOWN
run0 on uhub0
run0: <1.0> on usbus0
run0: MAC/BBP RT2872 (rev 0x0202), RF RT2820 (MIMO 2T2R), address xx:xx:xx:xx:xx:xx
ubt0 on uhub0
ubt0: <vendor 0x0cf3 product 0xe500, class 224/1, rev 2.01/0.01, addr 2> on usbus0
wlan0: Ethernet address: xx:xx:xx:xx:xx:xx
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
run0: firmware RT2870 ver. 0.33 loaded