Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2017-12-19 23:46:12
From: Chain-Q
Description: bPlan Pegasos II/G4 rev 2B.1, NetBSD/ofppc 7.1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.1 (INSTALL.201703111743Z)
Model: Pegasos2
total memory = 2048 MB
avail memory = 1972 MB
kern.module.path=/stand/ofppc/7.1/modules
timecounter: Timecounters tick every 10.000 msec
bootpath:
mainbus0 (root)
rtas0 at mainbus0: version 1, entry @pa 0xd3b000
cpu0 at mainbus0: 7457 (Revision 1.1), ID 0 (primary)
cpu0: HID0 0x84d0c3bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,SPD,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1
cpu0: 1000.00 MHz, 512KB L2 cache parity enabled
cpu0: L1 I-cache 32 KB 32B/line, D-cache 32 KB 32B/line
cpu0: L2 cache 256 KB 64B/line
cpu0: L3 cache 1 MB 128B/line
gt0 at mainbus0Switching to COM console at speed 115200
: MV6436x Discovery II
gt0: id 3, MPX bus, snoop=clean&flush wdog=0x60ffffff,0
gt0: pipeline aack-delay conf-sb-dis
gtidmac at gt0 unit 0 not configured
gtmpsc at gt0 unit 0 not configured
gtmpsc at gt0 unit 1 not configured
gtpci0 at gt0 unit 0: Marvell PCI Interface
pci0 at gtpci0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x11ab product 0x6460 (rev. 0x03)
genfb0 at pci0 dev 8 function 0: vendor 0x1002 product 0x5961 (rev. 0x01)
genfb1 at pci0 dev 8 function 1: vendor 0x1002 product 0x5941 (rev. 0x01)
gtpci1 at gt0 unit 1: Marvell PCI Interface
pci1 at gtpci1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci1 dev 0 function 0
pchb1: vendor 0x11ab product 0x6460 (rev. 0x03)
fwohci0 at pci1 dev 1 function 0: vendor 0x1106 product 0x3044 (rev. 0x46)
fwohci0: interrupting at irq 9
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:4b:2f
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pcib0 at pci1 dev 12 function 0: vendor 0x1106 product 0x8231 (rev. 0x10)
pcib0: PIRQ[0-3] not used
viaide0 at pci1 dev 12 function 1
viaide0: VIA Technologies VT8231 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci1 dev 12 function 2: vendor 0x1106 product 0x3038 (rev. 0x1e)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhci1 at pci1 dev 12 function 3: vendor 0x1106 product 0x3038 (rev. 0x1e)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
viaenv0 at pci1 dev 12 function 4: VIA Technologies VT8231 Hardware Monitor
viaenv0: Hardware Monitor disabled
timecounter: Timecounter "viaenv0" frequency 3579545 Hz quality 1000
viaenv0: 24-bit timer
auvia0 at pci1 dev 12 function 5: VIA Technologies VT82C686A AC'97 Audio (rev 0x40)
auvia0: interrupting at irq 9
auvia0: ac97: SigmaTel STAC9766/67 codec; headphone, 20 bit DAC, 18 bit ADC, SigmaTel 3D
auvia0: ac97: ext id 0x605<AC97_22,AMAP,SPDIF,VRA>
audio0 at auvia0: full duplex, playback, capture, mmap, independent
vendor 0x1106 product 0x3068 (miscellaneous communications, revision 0x20) at pci1 dev 12 function 6 not configured
vr0 at pci1 dev 13 function 0: vendor 0x1106 product 0x3065 (rev. 0x51)
vr0: interrupting at irq 9
vr0: Ethernet address: xx:xx:xx:xx:xx:xx
rlphy0 at vr0 phy 16: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: console
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
gttwsi at gt0 unit 0 not configured
mvgbec0 at gt0 unit 0 offset 0x0000-0x3fff: Marvell Gigabit Ethernet Controller
mvgbe at mvgbec0 port 0 not configured
mvgbe at mvgbec0 port 1 not configured
mvgbe at mvgbec0 port 2 not configured
vmmask 7a000000 schedmask 7a000000 highmask 7e000000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 33333333 Hz quality 100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB RECEIVER, rev 1.10/25.10, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0
wd0: <ST380011A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-RAM GH22NP20, , 2.00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
boot device: cpu0
md0: internal 5000 KB image area
root on md0a dumps on md0b
root file system type: ffs