Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-12-20 11:31:57
From: phx
Description: NetBSD/ofppc 8.0beta Pegasos2, 512MB, Radeon9250
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0_BETA (PEGASOS) #1: Mon Sep 11 20:34:15 CEST 2017
frank@tethys:/home/frank/netbsd/8/src/objofppc/sys/arch/ofppc/compile/PEGASOS
Model: Pegasos2
total memory = 512 MB
avail memory = 482 MB
timecounter: Timecounters tick every 10.000 msec
bootpath: /pci@80000000/ide@C,1/disk@0,0/netbsd
mainbus0 (root)
rtas0 at mainbus0: version 1, entry @pa 0x5c2000
cpu0 at mainbus0: 750 (Revision 3.1), ID 0 (primary)
cpu0: HID0 0x8050c0ac<EMCP,NAP,DPM,ICE,DCE,SGE,BTIC,ABE,BHT>, powersave: 1
cpu0: 600.00 MHz, 512KB WB with ECC L2 cache
cpu0: L1 I-cache 32 KB 32B/line, D-cache 32 KB 32B/line
cpu0: L2 cache 128 KB 32B/line
gt0 at mainbus0: MV6436x Discovery II
gt0: id 0, 60x bus wdog=0x60ffffff,0
gt0: pipeline aack-delay conf-sb-dis
gtidmac at gt0 unit 0 not configured
gtmpsc at gt0 unit 0 not configured
gtmpsc at gt0 unit 1 not configured
gtpci0 at gt0 unit 0: Marvell PCI Interface
pci0 at gtpci0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 11ab product 6460 (rev. 0x03)
genfb0 at pci0 dev 8 function 0: vendor 1002 product 5960 (rev. 0x01)
genfb0: framebuffer at 0xc0000000, size 800x600, depth 8, stride 800
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
genfb1 at pci0 dev 8 function 1: vendor 1002 product 5940 (rev. 0x01)
genfb1: unable to map the framebuffer
gtpci1 at gt0 unit 1: Marvell PCI Interface
pci1 at gtpci1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci1 dev 0 function 0
pchb1: vendor 11ab product 6460 (rev. 0x03)
fwohci0 at pci1 dev 1 function 0: vendor 1106 product 3044 (rev. 0x46)
fwohci0: interrupting at irq 9
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:06:00:00:xx:xx:xx
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pcib0 at pci1 dev 12 function 0: vendor 1106 product 8231 (rev. 0x10)
pcib0: PIRQ[0-3] not used
viaide0 at pci1 dev 12 function 1
viaide0: VIA Technologies VT8231 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci1 dev 12 function 2: vendor 1106 product 3038 (rev. 0x1e)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhci1 at pci1 dev 12 function 3: vendor 1106 product 3038 (rev. 0x1e)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
viaenv0 at pci1 dev 12 function 4: VIA Technologies VT8231 Hardware Monitor
viaenv0: Hardware Monitor disabled
timecounter: Timecounter "viaenv0" frequency 3579545 Hz quality 1000
viaenv0: 24-bit timer
auvia0 at pci1 dev 12 function 5: VIA Technologies VT82C686A AC'97 Audio (rev 0x40)
auvia0: interrupting at irq 9
auvia0: ac97: SigmaTel STAC9766/67 codec; headphone, 20 bit DAC, 18 bit ADC, SigmaTel 3D
auvia0: ac97: ext id 0x605<AC97_22,AMAP,SPDIF,VRA>
audio0 at auvia0: full duplex, playback, capture, mmap, independent
auvia0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
vendor 1106 product 3068 (miscellaneous communications, revision 0x20) at pci1 dev 12 function 6 not configured
vr0 at pci1 dev 13 function 0: vendor 1106 product 3065 (rev. 0x51)
vr0: interrupting at irq 9
vr0: Ethernet address: 00:0b:2f:xx:xx:xx
rlphy0 at vr0 phy 16: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
atppc0 at isa0 port 0x3bc-0x3c3 irq 7 drq : AT Parallel Port
atppc0: capabilities=0x21<INTR,EPP>
ppbus0 at atppc0
ppbus0: No IEEE1284 device found.
gpio0 at ppbus0: 17 pins
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
attimer0: attached to pcppi0
gttwsi at gt0 unit 0 not configured
mvgbec0 at gt0 unit 0 offset 0x0000-0x3fff: Marvell Gigabit Ethernet Controller
mvgbe at mvgbec0 port 0 not configured
mvgbe0 at mvgbec0 port 1 irq 9
mvgbe0: Ethernet address 00:0b:2f:xx:xx:xx
makphy0 at mvgbe0 phy 7: Marvell 88E1111 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mvgbe at mvgbec0 port 2 not configured
vmmask 7b000000 schedmask 7b000000 highmask 7f000000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 33333333 Hz quality 100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
uhub0 at usb0: vendor 1106 (0x1106) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1106 (0x1106) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: MOSIC (0x40b) USB 2A4K GamePad (0x6533), rev 1.10/1.00, addr 2, iclass 3/0
uhid0 at uhidev0: input=3, output=0, feature=0
wd0 at atabus0 drive 0
wd0: <FUJITSU MHV2080AH>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorpDVD-ROM SH-D162C, , TS04> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/ofppc/8.0/modules