Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2017-12-22 15:50:04
From: Neel Chauhan
Description: HP EliteBook 1040 G1 Intel i7-4650U 8GB RAM
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #6 r326983M: Tue Dec 19 17:34:37 EST 2017
    xxx@xxx.xxx:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 5.0.1 (tags/RELEASE_501/final 320880) (based on LLVM 5.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz (2294.74-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8139882496 (7762 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 213E    >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1147370125 Hz quality 1000
Cuse v0.1.35 @ /dev/cuse
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff80f8bda0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
drmn0: <Intel Haswell (ULT GT2 mobile)> on vgapci0
info: [drm] Memory usable by graphics device = 2048M
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus>error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
 on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drm_iic_dp_aux0 on drmn0
drm_iic_dp_aux1 on drmn0
drm_iic_dp_aux2 on drmn0
drmn0: taking over the fictitious range 0xc0000000-0xd0000000
info: [drm] Connector eDP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.eDP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-2
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-2
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "efifb" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xd0730000-0xd0733fff at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd0720000-0xd072ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point-LP HECI KT> port 0x30b0-0x30b7 mem 0xd073f000-0xd073ffff at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0x3080-0x309f mem 0xd0700000-0xd071ffff,0xd073e000-0xd073efff at device 25.0 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: PCIY_MSIX capability not found; or rid 0 == 0.
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
taskqgroup_attach: setaffinity failed for irq0: 3
taskqgroup_attach: setaffinity failed for tx: 3
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xd0734000-0xd0737fff at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <unknown> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xd0400000-0xd0401fff at device 0.0 on pci3
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xd073d000-0xd073d3ff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30bc-0x30bf,0x30a0-0x30a7,0x30b8-0x30bb,0x3060-0x307f mem 0xd073c000-0xd073c7ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich3: <AHCI channel> at channel 3 on ahci0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
acpi_hp0: HP event GUID detected, installing event handler
acpi_hp0: HP CMI GUID detected
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac1
hdaa1: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc1
pcm1: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa1
pcm2: <IDT 92HD91BXX (Analog)> at nid 10 and 17 on hdaa1
iwm0: hw rev 0x140, fw ver 17.352738.0, address xx:xx:xx:xx:xx:xx
error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before writing to 70180
uhub0: 13 ports with 13 removable, self powered
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ugen0.2: <vendor 0x8087 product 0x07dc> at usbus0
uhub1: 3 ports with 3 removable, self powered
ada0 at ahcich3 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SD6SN1M-256G-1006 X231306> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot []...
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x138a product 0x003f> at usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 8 ports with 8 removable, self powered
ugen0.4: <Chicony Electronics Co.,Ltd. HP HD Webcam> at usbus0
wlan0: Ethernet address: xx:xx:xx:xx:xx:xx
wlan0: link state changed to UP
ubt0 on uhub0
ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 1> on usbus0
error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung
info: [drm] capturing error event; look for more information in sysctl hw.dri.0.info.i915_error_state
error: [drm:pid24:i915_write32] *ERROR* Unknown unclaimed register before writing to 20a8
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()