Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-12-26 02:15:58
From: jakllsch
Description: NetBSD/macppc 7.1.1 GENERIC_MD on qemu-system-ppc v2.8 w/ -M g3beige
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1.1 (GENERIC_MD.201712222334Z)
total memory = 256 MB
avail memory = 234 MB
kern.module.path=/stand/macppc/7.1/modules
timecounter: Timecounters tick every 10.000 msec
found heathrow PIC at 81080000
bootpath: /pci@80000000/mac-io@3/ata-3@20000/disk@0:0/netbsd-GENERIC_MD.gz
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 3.1), ID 0 (primary)
cpu0: HID0 0x805000a4<EMCP,NAP,DPM,SGE,BTIC,BHT>, powersave: 1
cpu0: 0.00 MHz L2 cache present but not enabled
memory0 at mainbus0
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x00)
pchb0: L2 cache: 256K, uniprocessor/none mode
genfb0 at pci0 dev 1 function 0: unmatched vendor 0x1234 product 0x1111 (rev. 0x02)
genfb0: framebuffer at 0x80000000, size 800x600, depth 32, stride 3200
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
ne0 at pci0 dev 2 function 0: Realtek 8029 Ethernet
ne0: Ethernet address [_MAC_XXXXXXXXXX]
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x40 0x40] 10baseT-FDX
ne0: interrupting at irq 23
obio0 at pci0 dev 3 function 0: addr 0x81080000
cuda0 at obio0 offset 0x16000 irq 18
nadb0 at cuda0: Apple Desktop Bus
iic0 at cuda0: I2C bus
nvram0 at obio0 offset 0x60000
zsc0 at obio0 irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
wdc0 at obio0 offset 0x20000 irq 13, edge triggered: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x21000 irq 14, edge triggered: DMA transfer
atabus1 at wdc1 channel 0
vmmask 7e000000 schedmask 7e000000 highmask 7e000000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 16600000 Hz quality 100
adbkbd0 at nadb0 addr 2: mapped device (0)
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 4096 MB, 8322 cyl, 16 head, 63 sec, 512 bytes/sect x 8388608 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 2.5+> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wskbd0 at adbkbd0: console keyboard, using wsdisplay0
wsmouse0 at adbkbd0 mux 0
adbms0 at nadb0 addr 3: relative positioning device (mouse?) (0)
wsmouse1 at adbms0 mux 0
Kernelized RAIDframe activated
swwdog0: software watchdog initialized
boot device: wd0
md0: internal 2560 KB image area
root device (default md0a): wd0a
dump device (default wd0b):
file system (default generic):
root on wd0a dumps on wd0b
root file system type: ffs
init path (default /sbin/init):
init: trying /sbin/init