Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-01-19 14:13:35
From: dgrcsj
Description: DragonFly v5.1.0.649.g1bfb9-DEVELOPMENT on Dell XPS M1330 upgraded
Copyright (c) 2003-2018 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v5.1.0.649.g1bfb9-DEVELOPMENT #0: Mon Jan 15 18:15:13 -03 2018
    diego@kallfu:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC clock: 1995020160 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (1995.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Thermal and PM Features=0x3<SENSOR,TURBO>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 4283484160 (4085 MB)
avail memory = 3937243136 (3754 MB)
lapic: divisor index 0, frequency 99750391 Hz
srat_probe: can't locate SRAT
Initialize MI interrupts
machdep.spectre_mitigation=-1: IBRS=NOSUPPORT, IBPB=NOSUPPORT
module wpi already present!
VMM: VMENTRY_LOAD_IA32_EFER not supported by this CPU
machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug
system call performance will be impacted
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
interrupt uses mplock: swi_taskq
ACPI: RSDP 0x00000000000FBBF0 000024 (v02 DELL  )
ACPI: XSDT 0x00000000DF66F200 00005C (v01 DELL   M08      27D80708 ASL  00000061)
ACPI: FACP 0x00000000DF66F09C 0000F4 (v04 DELL   M08      27D80708 ASL  00000061)
ACPI: DSDT 0x00000000DF66F800 005733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0x00000000DF67E000 000040
ACPI: HPET 0x00000000DF66F300 000038 (v01 DELL   M08      00000001 ASL  00000061)
ACPI: APIC 0x00000000DF66F400 000068 (v01 DELL   M08      27D80708 ASL  00000047)
ACPI: MCFG 0x00000000DF66F3C0 00003E (v16 DELL   M08      27D80708 ASL  00000061)
ACPI: SLIC 0x00000000DF66F49C 000176 (v01 DELL   M08      27D80708 ASL  00000061)
ACPI: BOOT 0x00000000DF66EFC0 000028 (v01 DELL   M08      27D80708 ASL  00000061)
ACPI: SSDT 0x00000000DF66D9BC 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <DELL M08    > on motherboard
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8004EBB2B78 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xe0000000-0xefffffff,0xfea00000-0xfeafffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xfeb00000-0xfebfffff at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801H HDA Controller> mem 0xfe9fc000-0xfe9fffff irq 21 at device 27.0 on pci0
hdac0: link ctrl 0x800
hdac0: disable nosnoop
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: Disable PCI Express hot-plug interrupts(0x0008)
pci11: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2: Disable PCI Express hot-plug interrupts(0x0008)
pci12: <ACPI PCI bus> on pcib2
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe8ff000-0xfe8fffff irq 17 at device 0.0 on pci12
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib3: Disable PCI Express hot-plug interrupts(0x0008)
pci13: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib4: Disable PCI Express hot-plug interrupts(0x0008)
pci9: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5906M Fast Ethernet> mem 0xfe5f0000-0xfe5fffff irq 17 at device 0.0 on pci9
bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: MAC address: xx:xx:xx:xx:xx:xx
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
uhub0: 2 ports with 2 removable, self powered
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub1: 2 ports with 2 removable, self powered
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
usbus6: EHCI version 1.0
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib5
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xfe4ff800-0xfe4fffff irq 19 at device 1.0 on pci3
interrupt uses mplock: fwohci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:09:c1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: xx:xx:xx:xx:xx:xx
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
Unknown tcode 14
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
sdhci_pci0: <RICOH R5C822 SD> mem 0xfe4ff400-0xfe4ff4ff irq 18 at device 1.1 on pci3
sdhci_pci0: 1 slot(s) allocated
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
pci3: <base peripheral> (vendor 0x1180, dev 0x0843) at device 1.2 irq 18
pci3: <base peripheral> (vendor 0x1180, dev 0x0592) at device 1.3 irq 18
pci3: <base peripheral> (vendor 0x1180, dev 0x0852) at device 1.4 irq 18
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
interrupt uses mplock: ata0
ahci0: <AHCI-PCI-SATA> port 0x6ee0-0x6eff,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 mem 0xfe9fb800-0xfe9fbfff irq 17 at device 31.2 on pci0
ahci0: Intel hocus pocus
ahci0: AHCI 1.1 cap 0xe720ffc2<S64A,NCQ,SSNTF,SALP,SAL,SCLO,PMD,SSC,PSC,CCCS,EMS>, 3 ports, 32 tags/port, gen 2 (3Gbps)
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ugen3.2: <Logitech> at usbus3
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> on usbus3
ugen0.2: <Broadcom> at usbus0
uhub7: <Broadcom BCM2045B2, class 9/0, rev 2.00/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhub7: 3 ports with 0 removable, bus powered
ugen6.2: <vendor 0x05a9> at usbus6
ahci0.0: Found SSD "TS256GSSD420K O0918B" serial="C869290037"
ahci0.0: tags=32/32 satacap=830e satacap2=0084 satafea=014c NCQ=YES capacity=244198.33MB
ahci0.0: f85=7469 f86=b401 f87=4063 WC=enabled RA=enabled SEC=frozen
ugen0.3: <Broadcom Corp> at usbus0
ugen0.4: <Broadcom Corp> at usbus0
ukbd0: <Broadcom Corp product 0x4502, class 0/0, rev 2.00/1.00, addr 4> on usbus0
kbd2 at ukbd0
ugen0.5: <Broadcom Corp> at usbus0
ums1: <Broadcom Corp product 0x4503, class 0/0, rev 2.00/1.00, addr 5> on usbus0
ums1: 3 buttons and [XY] coordinates ID=2
ahci0.2: No device detected
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x283e) at device 31.3 irq 17
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800C5B2A040 000286 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80112CE4280 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800C5BA2CA0 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8004EC08C70 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
ACPI: Enabled 4 GPEs in block 00 to 1F
Freeing low dma reserve @ 0xfffff801130a0000
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
hdacc0: <Sigmatel STAC9228X HDA CODEC> at cad 0 on hdac0
hdaa0: <Sigmatel STAC9228X Audio Function Group> at nid 1 on hdacc0
pcm0: <Sigmatel STAC9228X (Analog 2.0+HP/2.0)> at nid 13,10 and 14 on hdaa0
pcm1: <Sigmatel STAC9228X (Analog)> at nid 15 and 19 on hdaa0
pcm2: <Sigmatel STAC9228X (Rear Digital)> at nid 33 on hdaa0
hdacc1: <Silicon Image SiI1392 HDA CODEC> at cad 2 on hdac0
hdaa1: <Silicon Image SiI1392 Audio Function Group> at nid 1 on hdacc1
pcm3: <Silicon Image SiI1392 (HDMI 8ch)> at nid 3 on hdaa1
CAM: Configuring 4 busses
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA TS256GSSD420K O091> Fixed Direct Access SCSI-4 device 
da0: Serial Number xxxxxxxx
da0: 300.000MB/s transfers
da0: 244198MB (500118192 512 byte sectors: 255H 63S/T 31130C)
da0: supports TRIM
Mounting root from hammer:serno/C869290037.s1d
HAMMER(ROOT) recovery check seqno=02b79406
HAMMER(ROOT) recovery range 3000000004a3f908-3000000004a3f908
HAMMER(ROOT) recovery nexto 3000000004a3f908 endseqno=02b79407
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 19624k, remaining available: 131072k
Mounting devfs
HAMMER(BUILD) recovery check seqno=00236fd5
HAMMER(BUILD) recovery range 3000000002680e98-3000000002680e98
HAMMER(BUILD) recovery nexto 3000000002680e98 endseqno=00236fd6
HAMMER(BUILD) mounted clean, no recovery needed
swap low/high-water marks set to 83883/125825