Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-03-20 20:08:29
From: emaste
Description: FreeBSD r331001 on Raspberry Pi 3 Bplus
KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #0 r331001: Thu Mar 15 17:45:44 UTC 2018 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs arc4random: no preloaded entropy cache MAP 39f39000 mode 2 pages 1 MAP 3b3ab000 mode 2 pages 1 MAP 3f100000 mode 1 pages 1 random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 16 on simplebus0 generic_timer0: <ARMv7 Generic Timer> irq 47,48,49,50 on simplebus0 Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 on simplebus0 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 17 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 18,19 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 20 on simplebus0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 21 on simplebus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 spibus0: <unknown card> at cs 1 mode 0 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 32 on simplesimplebus0 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 38,39 on simplebus0 usbus0 on bcm283x_dwcotg0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 42 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 fb0: <BCM2835 VT framebuffer driver> on simplebus0 fbd0 on fb0 VT: initialize with new VT driver "fb". fb0: 656x416(656x416@0,0) 24bpp fb0: fbswap: 1, pitch 1968, base 0x3eb33000, screen_size 818688 pmu0: <Performance Monitoring Unit> irq 46 on simplebus0 gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <led1> failed to map pin cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 cryptosoft0: <software crypto> Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ugen0.1: <DWCOTG OTG Root HUB> at usbus0 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 mmcsd0: 16GB <SDHC SD 0.2 SN B26491D3 MFG 05/2017 by 29 AD> at mmc0 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Instruction Set Attributes 0 = <CRC32> Instruction Set Attributes 1 = <> Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <0> Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA> Memory Model Features 1 = <> Memory Model Features 2 = <32b CCIDX,48b VA> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8> Debug Features 1 = <0> Auxiliary Features 0 = <0> Auxiliary Features 1 = <0> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 WARNING: WITNESS option enabled, expect reduced performance. arc4random: no preloaded entropy cache Trying to mount root from ufs:/dev/ufs/rootfs [rw]... Warning: no time-of-day clock registered, system time will not be set accurately uhub0: 1 port with 1 removable, self powered arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache ugen0.2: <vendor 0x0424 product 0x2514> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0 uhub1: MTT enabled Setting huuid: 30303030-3030-3030-3133-323037333764. Setting hostid: 0xc0e298c2. No suitable dump device was found. Starting file system checks: /dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/rootfs: clean, 3183574 free (22 frags, 397944 blocks, 0.0% fragmentation) uhub1: 4 ports with 3 removable, self powered Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat random: unblocking device. ugen0.3: <vendor 0x0424 product 0x2514> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 3> on usbususbus0 uhub2: MTT enabled Setting hostname: generic. Setting up huhub2: 3 ports with 2 removable, self powered arvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . ugen0.4: <vendor 0x0424 product 0x7800> at usbus0 Starting Network: lo0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet[_IP_XXXX] netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Starting devd. add host[_IP_XXXX]: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Starting syslogd. Clearing /tmp (X related). Updating motd:. Mounting late filesystems:. Configuring vt: blanktime. Performing sanity check on sshd configuration. Starting sshd. Starting cron. devmatch: Can't read linker hints file. Starting background file system checks in 60 seconds.