Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-03-22 10:39:20
From: utkarsh009
Description: NetBSD booting on [FX8350 GTX1070] custom PC.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.99.14 (GENERIC) #0: Wed Mar 21 10:21:17 UTC 2018
	xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8149 MB
avail memory = 7890 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
[350] nouveau* disabled
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Gigabyte Technology Co., Ltd. To be filled by O.E.M. (To be filled by O.E.M.)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BE1E5068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000BE1EA418 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20171110/tbfadt-693)
ACPI: DSDT 0x00000000BE1E5150 0052C7 (v02 ALASKA A M I    00000088 INTL 20051117)
ACPI: FACS 0x00000000BE5D6F80 000040
ACPI: APIC 0x00000000BE1EA510 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000BE1EA5B0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000BE1EA5F8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000BE1EA638 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000BE1EA670 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 9: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 10: pa 0xfec20000, version 0x21, 32 pins
cpu0 at mainbus0 apid 16
cpu0: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 17
cpu1: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 18
cpu2: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 19
cpu3: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu3: package 0, core 3, smt 0
cpu4 at mainbus0 apid 20
cpu4: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu4: package 0, core 4, smt 0
cpu5 at mainbus0 apid 21
cpu5: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu5: package 0, core 5, smt 0
cpu6 at mainbus0 apid 22
cpu6: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu6: package 0, core 6, smt 0
cpu7 at mainbus0 apid 23
cpu7: AMD FX(tm)-8350 Eight-Core Processor           , id 0x600f20
cpu7: package 0, core 7, smt 0
acpi0 at mainbus0: Intel ACPICA 20171110
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
AMDN (PNP0C01) at acpi0 not configured
S800 (PNP0C02) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
NBRM (PNP0C02) at acpi0 not configured
UMEM (PNP0C02) at acpi0 not configured
NMEM (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1002 product 5a14 (rev. 0x02)
ppb0 at pci0 dev 2 function 0: vendor 1002 product 5a16 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
ppb0: link is x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 10de product 1b81 (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic1 pin 1
hdafg0 at hdaudio0: vendor 10de product 0083
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: DP01 8ch: Digital Out [Jack]
hdafg0: DP02 8ch: Digital Out [Jack]
hdafg0: DP03 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
ppb1 at pci0 dev 4 function 0: vendor 1002 product 5a18 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
ppb1: link is x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci2 dev 0 function 0: vendor 1106 product 3483 (rev. 0x01)
xhci0: interrupting at ioapic1 pin 20
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ppb2 at pci0 dev 9 function 0: vendor 1002 product 5a1c (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at ioapic1 pin 24
re0: Ethernet address xx:xx:xx:xx:xx:xx
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 1002 product 4391 (rev. 0x40)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xf732ff03<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ohci0 at pci0 dev 18 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 5 ports: ohci0
usb3 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb4 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: 1 companion controller, 5 ports: ohci1
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1002 product 4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
iic1 at piixpm0: I2C bus
iic2 at piixpm0: I2C bus
iic3 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x40)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus4 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus5 at ixpide0 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: vendor 10ec product 0887
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Built-In]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg1: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
pcib0 at pci0 dev 20 function 3: vendor 1002 product 439d (rev. 0x40)
ppb3 at pci0 dev 20 function 4: vendor 1002 product 4384 (rev. 0x40)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ohci2 at pci0 dev 20 function 5: vendor 1002 product 4399 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb6 at ohci2: USB revision 1.0
ohci3 at pci0 dev 22 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb7 at ohci3: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: BIOS has given up ownership
ehci2: EHCI version 1.0
ehci2: 1 companion controller, 4 ports: ohci3
usb8 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 1022 product 1600 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 1022 product 1601 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 1022 product 1602 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family15h)
pchb4 at pci0 dev 24 function 4: vendor 1022 product 1604 (rev. 0x00)
pchb5 at pci0 dev 24 function 5: vendor 1022 product 1605 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 100 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow 15916 mW, 4000 MHz
acpicpu0: P1: FFH, lat   4 us, pow 11756 mW, 3400 MHz
acpicpu0: P2: FFH, lat   4 us, pow  8531 mW, 2800 MHz
acpicpu0: P3: FFH, lat   4 us, pow  5467 mW, 2100 MHz
acpicpu0: P4: FFH, lat   4 us, pow  3195 mW, 1400 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 4190 cycle TSC drift observed
uhub0 at usb0: vendor 1106 (0x1106) xHCI Root Hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 1106 (0x1106) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb3: vendor 1002 (0x1002) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb5: vendor 1002 (0x1002) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb7: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb2: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
uhub6 at usb4: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 5 ports with 5 removable, self powered
uhub7 at usb6: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub7: 2 ports with 2 removable, self powered
uhub8 at usb8: vendor 1002 (0x1002) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub8: 4 ports with 4 removable, self powered
uhub9 at uhub1 port 1: vendor 2109 (0x2109) USB2.0 Hub (0x3431), class 9/0, rev 2.10/4.20, addr 1
uhub9: single transaction translator
uhub9: 4 ports with 4 removable, self powered
ugen0 at uhub2 port 1
ugen0: Manufacturer Realtek (0xb05) ASUS EZ N Network Adapter (0x1786), rev 2.00/2.00, addr 2
umass0 at uhub8 port 3 configuration 1 interface 0
umass0: SanDisk (0x781) Cruzer Switch (0x5572), rev 2.00/1.26, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Switch, 1.26> disk removable
sd0: 7633 MB, 15509 cyl, 16 head, 63 sec, 512 bytes/sect x 15633408 sectors
sd0: 12663808 trailing sectors not covered by disklabel
uhidev0 at uhub9 port 1 configuration 1 interface 0
uhidev0: Logitech (0x46d) Gaming Mouse G402 (0xc07e), rev 2.00/90.02, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev1 at uhub9 port 1 configuration 1 interface 1
uhidev1: Logitech (0x46d) Gaming Mouse G402 (0xc07e), rev 2.00/90.02, addr 2, iclass 3/0
uhidev1: 17 report ids
ukbd0 at uhidev1 reportid 1: 8 Variable keys, 6 Array codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
wd0 at atabus4 drive 0
wd0: <ST1000DM010-2EP102>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
uhidev2 at uhub9 port 2 configuration 1 interface 0
uhidev2: SINO WEALTH (0x603) Mechanical Keyboard (0xf5), rev 1.10/7.13, addr 3, iclass 3/1
ukbd1 at uhidev2: 8 Variable keys, 6 Array codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub9 port 2 configuration 1 interface 1
uhidev3: SINO WEALTH (0x603) Mechanical Keyboard (0xf5), rev 1.10/7.13, addr 3, iclass 3/1
uhidev3: 8 report ids
uhid4 at uhidev3 reportid 1: input=1, output=0, feature=0
uhid5 at uhidev3 reportid 2: input=2, output=0, feature=0
uhid6 at uhidev3 reportid 5: input=0, output=0, feature=5
ukbd2 at uhidev3 reportid 6
ukbd2: attach failed, key code size != 8
ukbd3 at uhidev3 reportid 7: 56 Variable keys, 0 Array codes
wskbd2 at ukbd3 mux 1
wskbd2: connecting to wsdisplay0
ukbd4 at uhidev3 reportid 8: 56 Variable keys, 0 Array codes
wskbd3 at ukbd4 mux 1
wskbd3: connecting to wsdisplay0
sd0: 12663808 trailing sectors not covered by disklabel
sd0: 12663808 trailing sectors not covered by disklabel
sd0: 12663808 trailing sectors not covered by disklabel
sd0: 12663808 trailing sectors not covered by disklabel
WARNING: 2 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
sd0: 12663808 trailing sectors not covered by disklabel
root file system type: ffs
kern.module.path=/stand/amd64/8.99.14/modules
/dev/sd0a: file system not clean (fs_clean=0x8); please fsck(8)
/dev/sd0a: lost blocks 0 files 0
umass1 at uhub2 port 2 configuration 1 interface 0
umass1: Qualcomm (0x5c6) Mobile Router (0xf000), rev 2.00/3.18, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
cd0 at scsibus1 target 0 lun 0: <Mobile, Router CD-ROM, 0318> cdrom removable
cd0: detached
scsibus1: detached
umass1: detached
umass1: at uhub2 port 2 (addr 3) disconnected
urndis0 at uhub2 port 2 configuration 1 interface 0
urndis0: Qualcomm (0x5c6) Mobile Router (0xf00e), rev 2.00/3.18, addr 3
urndis0: address xx:xx:xx:xx:xx:xx