Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-03-24 13:23:22
From: ax0n
Description: OpenBSD 6.2/i386 on Motorola ML900 rugged laptop
OpenBSD 6.2 (GENERIC) #163: Tue Oct  3 19:51:20 MDT 2017
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.70GHz ("GenuineIntel" 686-class) 1.70 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF
real mem  = 1073168384 (1023MB)
avail mem = 1038577664 (990MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 04/28/05, BIOS32 rev. 0 @ 0xe9b30, SMBIOS rev. 2.3 @ 0xecc1a (38 entries)
bios0: vendor Insyde Software version "Version R0.16" date 04/28/2005
bios0: MOTOROLA ML900
acpi0 at bios0: rev 0
acpi0: APIC checksum error
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC BOOT
acpi0: wakeup devices SLPB(S3) LAN0(S3) USB3(S3) USB4(S3) USB5(S3) COM1(S4) COM4(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
, remapped to apid 1
acpiprt0 at acpi0: bus 1 (PCI1)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), FVS, 1700, 1200 MHz
acpitz0 at acpi0: critical temperature is 100 degC
acpibat0 at acpi0: BAT0 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0F13" at acpi0 not configured
"PNP0401" at acpi0 not configured
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0xe000 0xe4000/0x1800 0xe6000/0x1000! 0xeb000/0x5000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xa0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M9" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 1 int 16
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
bktr0 at pci2 dev 3 function 0 "Brooktree BT878" rev 0x11: apic 1 int 23
bktr0: Warning - card vendor 0xffff (model 0xffff) unknown.
bktr0: Pinnacle/Miro TV, <no> tuner.
"Brooktree BT878 Audio" rev 0x11 at pci2 dev 3 function 1 not configured
uhci0 at pci2 dev 5 function 0 "VIA VT83C572 USB" rev 0x50: apic 1 int 16
uhci1 at pci2 dev 5 function 1 "VIA VT83C572 USB" rev 0x50: apic 1 int 17
ehci0 at pci2 dev 5 function 2 "VIA VT6202 USB" rev 0x51: apic 1 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
iwi0 at pci2 dev 6 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1 int 19, address [_MAC_XXXXXXXXXX]
cbb0 at pci2 dev 7 function 0 "TI PCI4451 CardBus" rev 0x00: apic 1 int 16, CardBus support disabled
cbb1 at pci2 dev 7 function 1 "TI PCI4451 CardBus" rev 0x00: apic 1 int 16, CardBus support disabled
"TI PCI4451 FireWire" rev 0x00 at pci2 dev 7 function 2 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: apic 1 int 20, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
puc0 at pci2 dev 9 function 0 "Oxford OX16PCI952" rev 0x00: ports: 2 com
com4 at puc0 port 0 apic 1 int 20: st16650, 32 byte fifo
com4: probed fifo depth: 16 bytes
com5 at puc0 port 1 apic 1 int 20: st16650, 32 byte fifo
com5: probed fifo depth: 16 bytes
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG MP0402H>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E, 1.9A> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: apic 1 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: apic 1 int 17, ICH3
ac97: codec id 0x414c4740 (Avance Logic ALC202)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.1, 0x8f40b1 0x0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub3 at uhub0 port 4 configuration 1 interface 0 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2
uhub4 at uhub3 port 4 configuration 1 interface 0 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 3
ugen0 at uhub4 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/0.00 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (f82189ffdb99db34.a) swap on wd0b dump on wd0b
radeondrm0: 1024x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)