Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-04-11 20:23:03
From: ryo
Description: NetBSD/aarch64-current(8.99.14) on Raspberry Pi 3
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.14 (RPI64) #2: Wed Apr 11 14:19:28 JST 2018
ryo@moveq:/usr/src/sys/arch/evbarm/compile/RPI64
total memory = 936 MB
avail memory = 904 MB
timecounter: Timecounters tick every 10.000 msec
armfdt0 (root)
fdt0 at armfdt0: Raspberry Pi 3 Model B
fdt1 at fdt0
fdt2 at fdt0
fdt3 at fdt0
fclock0 at fdt2: 19200000 Hz fixed clock
fclock1 at fdt2: 480000000 Hz fixed clock
cpus0 at fdt0
cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu0: CPU Affinity 0-0-0-0
cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu0: Dcache line 64, Icache line 64
cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1 at cpus0: disabled (uniprocessor kernel)
cpu2 at cpus0: disabled (uniprocessor kernel)
cpu3 at cpus0: disabled (uniprocessor kernel)
bcmicu0 at fdt1
bcmicu1 at fdt1
bcmcprman0 at fdt1: BCM283x Clock Controller
gtmr0 at fdt0: Generic Timer
gtmr0: interrupting on local_intc irq 3
armgtmr0 at gtmr0: ARMv7 Generic 64-bit Timer (19200 kHz)
timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
bcmaux0 at fdt1
/soc/thermal@7e212000 at fdt1 not configured
/soc/dsi@7e209000 at fdt1 not configured
bcmgpio0 at fdt1: GPIO controller
gpio0 at bcmgpio0: 32 pins
gpio1 at bcmgpio0: 22 pins
bcmdmac0 at fdt1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
/soc/power at fdt1 not configured
bsciic0 at fdt1: Broadcom Serial Controller
iic0 at bsciic0: I2C bus
/phy at fdt0 not configured
bcmmbox0 at fdt1: VC mailbox
bcmmbox0: interrupting on icu irq 193
vcmbox0 at bcmmbox0
/soc/firmware at fdt1 not configured
/framebuffer@3daf0000 at fdt0 not configured
gpioleds0 at fdt0: ACT
/soc/timer@7e003000 at fdt1 not configured
watchdog0 at fdt1: Power management, Reset and Watchdog controller
bcmrng0 at fdt1: RNG
plcom0 at fdt1
plcom0: txfifo disabled
sdhost0 at fdt1: SD HOST controller
sdhost0: interrupting on icu irq 184
bsciic1 at fdt1: Broadcom Serial Controller
iic1 at bsciic1: I2C bus
/soc/pixelvalve@7e206000 at fdt1 not configured
/soc/pixelvalve@7e207000 at fdt1 not configured
com0 at fdt1: BCM AUX UART, working fifo
com0: console
com0: interrupting on icu irq 157
/soc/pwm@7e20c000 at fdt1 not configured
sdhc0 at fdt1: SDHC controller
sdhc0: interrupting on icu irq 190
/soc/hvs@7e400000 at fdt1 not configured
bsciic2 at fdt1: Broadcom Serial Controller
iic2 at bsciic2: I2C bus
/soc/vec@7e806000 at fdt1 not configured
/soc/pixelvalve@7e807000 at fdt1 not configured
/soc/hdmi@7e902000 at fdt1 not configured
dwctwo0 at fdt1: USB controller
dwctwo0: interrupting on icu irq 137
/soc/v3d@7ec00000 at fdt1 not configured
/soc/gpu at fdt1 not configured
genfb0 at fdt1rpi_fb_init: addr = 0xfd876000 size = 3686400
rpi_fb_init: depth = 32
rpi_fb_init: pitch = 5120
rpi_fb_init: width = 1280 height = 720
rpi_fb_init: vwidth = 1280 vheight = 720
genfb0: framebuffer at 0xfd876000, size 1280x720, depth 32, stride 5120
wsdisplay0 at genfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 0-3 added (default, vt100 emulation)
/soc/vchiq at fdt1 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
sdmmc0 at sdhost0
sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc1 at sdhc0 slot 0
usb0 at dwctwo0: USB revision 2.0
sdhc0: cmd timeout error
ld0 at sdmmc0: <0x03:0x5344:SU02G:0x80:0x10f597b8:0x076>
uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ld0: 1938 MB, 984 cyl, 64 head, 63 sec, 512 bytes/sect x 3970048 sectors
ld0: 4-bit width, 25.000 MHz
IPsec: Initialized Security Association Processing.
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 1 not configured
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
uhub1 at uhub0 port 1: vendor 0424 (0x424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2
uhub1: multiple transaction translators
uhub1: 5 ports with 4 removable, self powered
usmsc0 at uhub1 port 1
usmsc0: vendor 0424 (0x424) product ec00 (0xec00), rev 2.00/2.00, addr 3
usmsc0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0 at uhub1 port 3
axe0: ASIX Elec. Corp. (0xb95) AX887 (0x7720), rev 2.00/0.01, addr 4
axe0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy1 at axe0 phy 16: OUI 0x007063, model 0x0006, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhub0: illegal enable change, port 1
WARNING: 1 error while detecting hardware; check system log.
boot device: ld0
root on axe0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server:[_IP_XX]
nfs_boot: my_name=rpi3
nfs_boot: my_domain=myhost.mydomain
nfs_boot: my_addr=192.168.0.123
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.0.1
root on[_IP_XXXXXX]:/src/nfsboot/aarch64
root file system type: nfs
kern.module.path=/stand/evbarm/8.99.14/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!