Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-04-16 20:46:19
From: Seven / Venture37
Description: 14inch iBook G4 1.42Ghz (PowerBook6,7 1.5GB RAM, Airport, BlueTooth)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 8.0_BETA (GENERIC.201804160020Z)
total memory = 1536 MB
oea_startup: failed to allocate DEAD ZONE: error=12
avail memory = 1474 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
userconf: configure system autoconfiguration:
uc> disable radeonfb
[  154.000000] radeonfb* disabled
uc> exit
Continuing...
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f4000000/ata-6@d/disk@0:0/netbsd8.gz
mainbus0 (root)
cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary)
cpu0: HID0 0x84d0c1bc<EMCP,EICE,DOZE,NAP,DPM,ICE,DCE,IFEM,SGE,BTIC,FBIOB,ABE,BHT>, powersave: 1
cpu0: 1427.48 MHz, 512KB L2 cache no parity parity enabled
memory0 at mainbus0: len=256
spdmem0 at memory0
spdmem0: DDR SDRAM, no parity or ECC, 1GB, 333MHz (PC-2700)
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
uni_n0 at mainbus0 address 0xf8000000
hw-clock at uni_n0 not configured
ki2c0 at uni_n0 address 0xf8001000
iic1 at ki2c0: I2C bus
dbcool0 at ki2c0
dbcool0: ADT7467/ADT7468 dBCool(tm) Controller (rev 0x07, stepping 0x01)
accelerometer at ki2c0 address 0xb0 not configured
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
genfb0 at pci0 dev 16 function 0found EDID property...
: ATI Technologies FireGL Mobility T2e (M11) NV (rev. 0x80)
genfb0: framebuffer at 0x98008000, size 1024x768, depth 8, stride 1024
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
bwi0 at pci1 dev 18 function 0: Broadcom Wireless
bwi0: interrupting at irq 52
bwi0: BBP id 0x4318, BBP rev 0x2, BBP pkg 2
bwi0: MAC: rev 9
bwi0: PHY type 2, rev 7, ver 3
bwi0: RF manu 0x17f, type 0x2050, rev 8
bwi0: invalid antenna gain in sprom
bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x0: irq 30,1,2
pmu0 at obio0 offset 0x16000 irq 47:  rev. 12
pmu0: initializing IIC bus
pmu0: initializing RTC
pmu0: initializing ADB
nadb0 at pmu0: Apple Desktop Bus
pmu0: power-mgt not configured
smartbat0 at pmu0 addr 0: smart battery
flags: 5 AC present
ki2c1 at obio0
iic2 at ki2c1: I2C bus
deq0 at ki2c1 Apple Digital Equalizer, addr 0x6a
wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer
atabus0 at wdc0 channel 0
snapper0: codec: TAS3004
audio0 at snapper0: full duplex, playback, capture, mmap
snapper0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
snapper0: Latency: 256 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci0: memory access is disabled
ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci1: memory access is disabled
ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04)
ehci0: interrupting at irq 63
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 3 ports each: ohci3 ohci4
usb3 at ehci0: USB revision 2.0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:14:51:ff:fe:
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
gem0: interrupting at irq 41
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: Ethernet address 00:14:51:, 10KB RX fifo, 4KB TX fifo
vmmask 737c0000 schedmask 7ffc0000 highmask 7ffc0000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 18432000 Hz quality 100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
uhub0 at usb0: Apple Computer (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NEC (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: NEC (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NEC (0x1033) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-R   UJ-845E, , DMP2> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
adbkbd0 at nadb0 addr 2: iBook keyboard
wskbd0 at adbkbd0 mux 1
wskbd0: connecting to wsdisplay0
wsmouse0 at adbkbd0 mux 0
adbbt0 at nadb0 addr 7: button device
AC Power: AC adapter online.
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Apple Computer (0x5ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 2.00/19.65, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Apple Computer (0x5ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 2.00/19.65, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse1 at ums0 mux 0
wd0 at atabus1 drive 0
wd0: <TOSHIBA MK6025GAS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev2 at uhub0 port 2 configuration 1 interface 0
uhidev2: Apple Computer (0x5ac) Apple Internal Trackpad (0x30b), rev 2.00/0.80, addr 3, iclass 3/1
pbms0 at uhidev2: 12 inch PowerBook Trackpad
wsmouse2 at pbms0 mux 0
swwdog0: software watchdog initialized
WARNING: 3 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/macppc/8.0/modules