Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-06-14 09:14:38
From: msaitoh
Description: HP ProBook 4510s
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.19 (GENERIC) #132: Thu Jun 14 16:25:56 JST 2018
[_EMAIL_XXXXXXXXXXXXXX]:/disk/sources/14NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 3066 MB
avail memory = 2953 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0xec<clock_battery,ROM_cksum,config_unit,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP ProBook 4510s (F.0F)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6970 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BFDFE120 00006C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x00000000BFDFC000 0000F4 (v03 HPQOEM 3074 0000000F HP 00000001)
ACPI: DSDT 0x00000000BFDDB000 01B05A (v01 HPQOEM 3074 00000001 INTL 20060912)
ACPI: FACS 0x00000000BFDAE000 000040
ACPI: HPET 0x00000000BFDFB000 000038 (v01 HPQOEM 3074 00000001 HP 00000001)
ACPI: APIC 0x00000000BFDFA000 000084 (v01 HPQOEM 3074 00000001 HP 00000001)
ACPI: MCFG 0x00000000BFDF9000 00003C (v01 HPQOEM 3074 00000001 HP 00000001)
ACPI: ASF! 0x00000000BFDF8000 0000A0 (v32 HPQOEM 3074 00000001 HP 00000001)
ACPI: SSDT 0x00000000BFDD8000 0002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 0x00000000BFDD6000 00066C (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BFDD5000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BFDD4000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
timecounter: Timecounter "lapic" frequency 199618569 Hz quality -100
cpu0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz, id 0x6fd
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz, id 0x6fd
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20180427
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,0000000f>, AslId < ,01000013>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE400409C9690 0002B7 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE400B9B6F010 00057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE40040995010 0001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE40040A28E20 00008D (v01 PmRef ApCst 00003000 INTL 20060912)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
ACPI Error: No pointer back to namespace node in package 0xffffe40040a645d0 (20180427/dsargs-365)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0.RPPC, AE_AML_INTERNAL (20180427/psparse-569)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0.PRIT, AE_AML_INTERNAL (20180427/psparse-569)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0.ECRI, AE_AML_INTERNAL (20180427/psparse-569)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_AML_INTERNAL (20180427/psparse-569)
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (DGFX): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [0,5,10,15,20,25,30,33,36,40,43,46,50,55,60,65,70,75,80,83,86,90,93,96,100]
acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0210): ACPI Display Output Device
acpiout4 at acpivga0 (DD04, 0x0220): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpivga0: 0x0210 (acpiout3): Unknown Output Device, head 0, bios detect
acpivga0: 0x0220 (acpiout4): Unknown Output Device, head 0, bios detect
FWHD (INT0800) at acpi0 not configured
HTAM (PNP0C02) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0149) (aux port): irq 12
ACEL (HPQ0004) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LIon rechargeable battery
acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpidalb0 at acpi0 (HST1, PNP0C32-1): Direct Application Launch Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
acpifan0 at acpi0 (FAN6, PNP0C0B-6): ACPI Fan
acpifan1 at acpi0 (FAN7, PNP0C0B-7): ACPI Fan
acpifan2 at acpi0 (FAN8, PNP0C0B-8): ACPI Fan
acpifan3 at acpi0 (FAN9, PNP0C0B-9): ACPI Fan
acpifan4 at acpi0 (FANA, PNP0C0B-10): ACPI Fan
acpifan5 at acpi0 (FANB, PNP0C0B-11): ACPI Fan
acpifan6 at acpi0 (FANG, PNP0C0B-12): ACPI Fan
acpitz0 at acpi0 (GFXZ)
acpitz0: active cooling level 0: 105.0C
acpitz0: active cooling level 1: 96.0C
acpitz0: active cooling level 2: 87.0C
acpitz0: active cooling level 3: 79.0C
acpitz0: active cooling level 4: 71.0C
acpitz0: active cooling level 5: 63.0C
acpitz0: active cooling level 6: 56.0C
acpitz0: levels: critical 108.0 C
acpifan7 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan8 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan9 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan10 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan11 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpifan12 at acpi0 (FAN5, PNP0C0B-5): ACPI Fan
acpitz1 at acpi0 (DTSZ)
acpitz1: levels: critical 100.0 C, passive cooling
acpitz2 at acpi0 (CPUZ): cpu0 cpu1
acpitz2: active cooling level 0: 84.0C
acpitz2: active cooling level 1: 74.0C
acpitz2: active cooling level 2: 62.0C
acpitz2: active cooling level 3: 52.0C
acpitz2: active cooling level 4: 44.0C
acpitz2: active cooling level 5: 37.0C
acpitz2: levels: critical 103.0 C, passive 100.0 C
acpitz3 at acpi0 (SKNZ): cpu0 cpu1
acpitz3: levels: critical 105.0 C, passive 95.0 C, passive cooling
acpitz4 at acpi0 (BATZ): cpu0 cpu1
acpitz4: levels: critical 103.0 C, passive 60.0 C, passive cooling
acpitz5 at acpi0 (FDTZ)
acpitz5: levels: critical 110.0 C, passive cooling
ACPI: Enabled 6 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
allocated pic ioapic0 type edge pin 1 level 6 to cpu0 slot 1 idt entry 97
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Extended W mode, Palm detect, Multi-finger Report
allocated pic ioapic0 type edge pin 12 level 6 to cpu0 slot 2 idt entry 98
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07)
agp0 at pchb0autoconfiguration error: : can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 2a41 (rev. 0x07)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 9552 (rev. 0x00)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
allocated pic msi0 type edge pin 0 level 7 to cpu0 slot 16 idt entry 112
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 3 idt entry 99
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03)
allocated pic ioapic0 type level pin 17 level 6 to cpu0 slot 4 idt entry 100
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03)
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 101
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03)
allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 6 idt entry 102
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
allocated pic msi1 type edge pin 0 level 7 to cpu0 slot 17 idt entry 113
hdaudio1: interrupting at msi1 vec 0
hdafg1 at hdaudio1: vendor 11d4 product 194a
hdafg1: DAC00 2ch: Speaker [Built-In]
hdafg1: ADC01 2ch: Mic In [Built-In]
hdafg1: DAC02 2ch: HP Out [Jack]
hdafg1: ADC03 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg1: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdvsmfg at hdaudio1 not configured
ppb1 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 8086 product 2942 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 14e4 product 4315 (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 2: vendor 8086 product 2944 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 8086 product 2948 (rev. 0x03)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 69
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 5: vendor 8086 product 294a (rev. 0x03)
ppb5: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci6 at ppb5 bus 134
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci6 dev 0 function 0allocated pic ioapic0 type level pin 17 level 6 to cpu0 slot 4 idt entry 100
, Yukon-2 Extreme rev. B0 (0x2): ioapic0 pin 17
msk0 at mskc0 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03)
allocated pic ioapic0 type level pin 20 level 6 to cpu0 slot 7 idt entry 103
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03)
allocated pic ioapic0 type level pin 22 level 6 to cpu0 slot 8 idt entry 104
uhci4: interrupting at ioapic0 pin 22
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03)
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 101
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03)
allocated pic ioapic0 type level pin 20 level 6 to cpu0 slot 7 idt entry 103
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb6 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93)
pci7 at ppb6 bus 135
pci7: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2919 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03)
allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 9 idt entry 105
ahcisata0: interrupting at ioapic0 pin 21
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 5
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
ACPI Error: No pointer back to namespace node in package 0xffffe400b9b4dc48 (20180427/dsargs-365)
ACPI Error: Method parse/execution failed \_PR.CPU0._TSS, AE_AML_INTERNAL (20180427/psparse-569)
acpicpu0: autoconfiguration error: failed to evaluate _TSS: AE_AML_INTERNAL
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 57 us, pow 100 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2001 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 30000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 25000 mW, 1200 MHz
acpicpu0: P4: FFH, lat 10 us, pow 12000 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
ACPI Error: No pointer back to namespace node in package 0xffffe40040bbf258 (20180427/dsargs-365)
ACPI Error: Method parse/execution failed \_PR.CPU0._TSS, AE_AML_INTERNAL (20180427/psparse-569)
ACPI Error: Method parse/execution failed \_PR.CPU1._TSS, AE_AML_INTERNAL (20180427/psparse-569)
acpicpu1: autoconfiguration error: failed to evaluate _TSS: AE_AML_INTERNAL
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1995147700 Hz quality -100
uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
ehci0: handing over full speed device on port 1 to uhci0
wd0 at atabus0 drive 0
wd0: <WDC WD1600BUCT-63TWBY0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp DVDRAM GT20L, M5I9AUI5519, DC05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uvideo0 at uhub3 port 5 configuration 1 interface 0: Ricoh co. Ltd. (0x5986) HP Webcam [2 MP Fixed] (0x3b0), rev 2.00/2.20, addr 2
video0 at uvideo0: Ricoh co. Ltd. (0x5986) HP Webcam [2 MP Fixed] (0x3b0), rev 2.00/2.20, addr 2
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
WARNING: 3 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.19/modules
drm: initializing kernel modesetting (RV710 0x1002:0x9552 0x103C:0x3074).
drm: register mmio base: 0xd8400000
drm: register mmio size: 65536
drm kern info: ATOM BIOS: HP_Invicta_M92S2LP_DDR2
radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon0: info: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
drm: Detected VRAM RAM=200M, BAR=256M
drm: RAM width 64bits DDR
Zone kernel: Available graphics memory: 802322 kiB
drm: radeon: 512M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading RV710 Microcode
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffff800056d29c00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffff800056d29c0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0x0xffff800056d5c598
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 3 idt entry 99
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm: VGA-1
drm: DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
drm: Connector 1:
drm: LVDS-1
drm: DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
drm: Encoders:
drm: LCD1: INTERNAL_UNIPHY2
drm: Connector 2:
drm: HDMI-A-1
drm: HPD1
drm: DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
drm: Encoders:
drm: DFP1: INTERNAL_UNIPHY
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff80005737d000, size 1366x768, depth 32, stride 5632
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ubt0 at uhub0 port 1
ubt0: Broadcom Corp (0x3f0) HP Integrated Module (0x231d), rev 2.00/1.65, addr 2
acpibat0: normal capacity on 'charge state'
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
cpu0: ucode 0xa3->0xa4
cpu1: ucode 0xa3->0xa4