Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-06-19 09:38:20
From: Sevan / Venture37
Description: Alix 2c3 with Atheros 5212 mini-pci a/b/g wireless card installed
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.19 (GENERIC) #0: Sun Jun 17 23:37:22 UTC 2018 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC total memory = 255 MB avail memory = 231 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Generic PC mainbus0 (root) Firmware Error (ACPI): A valid RSDP was not found (20180427/tbxfroot-261) autoconfiguration error: acpi_probe: failed to initialize tables ACPI Error: Could not remove SCI handler (20180427/evmisc-312) cpu0 at mainbus0 cpu0: Geode(TM) Integrated Processor by AMD PCS, id 0x5a2 cpu0: package 0, core 0, smt 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 1 function 0: vendor 1022 product 2080 (rev. 0x31) glxsb0 at pci0 dev 1 function 2: RNG AES vr0 at pci0 dev 9 function 0: vendor 1106 product 3053 (rev. 0x96) vr0: interrupting at irq 10 vr0: Ethernet address: 00:0d:b9: ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0034, rev. 3 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr1 at pci0 dev 10 function 0: vendor 1106 product 3053 (rev. 0x96) vr1: interrupting at irq 11 vr1: Ethernet address: 00:0d:b9: ukphy1 at vr1 phy 1: OUI 0x0002c6, model 0x0034, rev. 3 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr2 at pci0 dev 11 function 0: vendor 1106 product 3053 (rev. 0x96) vr2: interrupting at irq 15 vr2: Ethernet address: 00:0d:b9: ukphy2 at vr2 phy 1: OUI 0x0002c6, model 0x0034, rev. 3 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ath0 at pci0 dev 12 function 0: Atheros 5212 ath0: interrupting at irq 9 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3 gcscpcib0 at pci0 dev 15 function 0: vendor 1022 product 2090 (rev. 0x03) timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000 gcscpcib0: Watchdog Timer via MFGPT0, GPIO gpio0 at gcscpcib0: 32 pins viaide0 at pci0 dev 15 function 2: AMD CS5536 IDE Controller (rev. 0x01) viaide0: bus-master DMA support present viaide0: primary channel wired to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel wired to compatibility mode viaide0: secondary channel ignored (disabled) ohci0 at pci0 dev 15 function 4: vendor 1022 product 2094 (rev. 0x02) ohci0: interrupting at irq 12 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 gcscehci0 at pci0 dev 15 function 5: vendor 1022 product 2095 (rev. 0x02) gcscehci0: interrupting at irq 12 gcscehci0: EHCI version 1.0 gcscehci0: 1 companion controller, 4 ports: ohci0 usb1 at gcscehci0: USB revision 2.0 isa0 at gcscpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 attimer0: attached to pcppi0 isapnp0: no ISA Plug 'n Play devices found timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered IPsec: Initialized Security Association Processing. wd0 at atabus0 drive 0 wd0: <SanDisk SDCFH2-2048> wd0: drive supports 4-sector PIO transfers, LBA addressing wd0: 1953 MB, 3970 cyl, 16 head, 63 sec, 512 bytes/sect x 4001760 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2 wd0(viaide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) WARNING: 1 error while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/i386/8.99.19/modules