Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-07-01 11:36:17
From: bugabinga
Description: Thinkpad x230 OpenBSD 6.3
OpenBSD 6.3 (GENERIC.MP) #4: Sun Jun 17 11:22:20 CEST 2018 xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16787849216 (16010MB) avail mem = 16271990784 (15518MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdaa9c000 (68 entries) bios0: vendor LENOVO version "G2ETA8WW (2.68 )" date 04/19/2017 bios0: LENOVO 23255B2 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF! UEFI UEFI POAT SSDT SSDT DMAR UEFI DBG2 acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.50 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache acpihpet0: recalibrated TSC frequency 2594112645 Hz cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.12 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 acpitz0 at acpi0: critical temperature is 103 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "LEN0071" at acpi0 not configured "LEN0020" at acpi0 not configured "SMO1200" at acpi0 not configured acpibat0 at acpi0: BAT0 model "45N1023" serial 15921 type LION oem "SANYO" acpiac0 at acpi0: AC unit online "LEN0078" at acpi0 not configured acpithinkpad0 at acpi0 "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured acpidock0 at acpi0: GDCK not docked (0) acpivideo0 at acpi0: VID_ acpivout at acpivideo0 not configured acpivideo1 at acpi0: VID_ cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1366x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address xx:xx:xx:xx:xx:xx ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci1 at ppb0 bus 2 sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16 sdhc0: SDHC 3.0, 50 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 3 iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address xx:xx:xx:xx:xx:xx ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 usb2 at ehci1: USB revision 2.0 uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3 0/direct fixed naa.5001b444a6c5d3cb sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder A FIFO underrun uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 umass0 at uhub3 port 2 configuration 1 interface 0 "PNY Technologies USB 3.0 FD" rev 2.10/10.75 addr 3 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <PNY, USB 3.0 FD, 1.00> SCSI4 0/direct removable serial.154b006b000000000310 sd1: 14950MB, 512 bytes/sector, 30617600 sectors ugen0 at uhub3 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4 uvideo0 at uhub3 port 6 configuration 1 interface 0 "Ricoh Company Ltd. Integrated Camera" rev 2.00/0.11 addr 5 video0 at uvideo0 uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub5 at uhub4 port 8 configuration 1 interface 0 "Lenovo product 0x100a" rev 2.00/0.00 addr 3 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (a4edf5839a27f371.a) swap on sd0b dump on sd0b uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech G700 Laser Mouse" rev 2.00/65.02 addr 4 uhidev0: iclass 3/1 ums0 at uhidev0: 16 buttons, Z and W dir wsmouse1 at ums0 mux 0 uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech G700 Laser Mouse" rev 2.00/65.02 addr 4 uhidev1: iclass 3/0, 17 report ids ukbd0 at uhidev1 reportid 1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 sd1 detached scsibus2 detached umass0 detached umass0 at uhub3 port 2 configuration 1 interface 0 "PNY Technologies USB 3.0 FD" rev 2.10/10.75 addr 3 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <PNY, USB 3.0 FD, 1.00> SCSI4 0/direct removable serial.154b006b000000000310 sd1: 14950MB, 512 bytes/sector, 30617600 sectors uhidev2 at uhub5 port 3 configuration 1 interface 0 "Razer BlackWidow Razer BlackWidow" rev 2.00/2.00 addr 5 uhidev2: iclass 3/1 ukbd1 at uhidev2: 8 variable keys, 6 key codes wskbd2 at ukbd1 mux 1 wskbd2: connecting to wsdisplay0 uhidev3 at uhub5 port 3 configuration 1 interface 1 "Razer BlackWidow Razer BlackWidow" rev 2.00/2.00 addr 5 uhidev3: iclass 3/0, 2 report ids uhid3 at uhidev3 reportid 1: input=3, output=0, feature=0 uhid4 at uhidev3 reportid 2: input=3, output=0, feature=0 uhidev4 at uhub5 port 3 configuration 1 interface 2 "Razer BlackWidow Razer BlackWidow" rev 2.00/2.00 addr 5 uhidev4: iclass 3/0 ums1 at uhidev4: 3 buttons, Z dir wsmouse2 at ums1 mux 0 error: [drm:pid1020:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe B error: [drm:pid1020:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe B wsmouse1 detached ums0 detached uhidev0 detached wskbd1: disconnecting from wsdisplay0 wskbd1 detached ukbd0 detached uhid0 detached uhid1 detached uhid2 detached uhidev1 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ukbd1 detached uhidev2 detached uhid3 detached uhid4 detached uhidev3 detached wsmouse2 detached ums1 detached uhidev4 detached uhub5 detached acpidock0: undocked sd1 detached scsibus2 detached umass0 detached