NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2018-07-16 07:18:41
From: ryo
Description: NetBSD/evbarm aarch64 8.99.21 on Raspberry Pi 3 (MULTIPROCESSOR)

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 8.99.21 (RPI64) #255: Sat Jul 14 03:16:05 JST 2018
        ryo@moveq:/usr/src/sys/arch/evbarm/compile/RPI64
total memory = 935 MB
avail memory = 878 MB
timecounter: Timecounters tick every 10.000 msec
armfdt0 (root)
simplebus0 at armfdt0: Raspberry Pi 3 Model B
simplebus1 at simplebus0
simplebus2 at simplebus0
fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
simplebus3 at simplebus0
cpus0 at simplebus0
cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu0: package 0, core 0, smt 0
cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu0: Dcache line 64, Icache line 64
cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu1: package 0, core 1, smt 0
cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu2: package 0, core 2, smt 0
cpu3 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu3: package 0, core 3, smt 0
bcmicu0 at simplebus1
bcmicu1 at simplebus1: Multiprocessor
bcmcprman0 at simplebus1: BCM283x Clock Controller
gtmr0 at simplebus0: Generic Timer
gtmr0: interrupting on local_intc irq 3
armgtmr0 at gtmr0: ARM Generic Timer (19200 kHz)
timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
bcmaux0 at simplebus1
/soc/thermal@7e212000 at simplebus1 not configured
/soc/dsi@7e209000 at simplebus1 not configured
bcmgpio0 at simplebus1: GPIO controller
bcmgpio0: pins 0..31 interrupting on icu irq 177
bcmgpio0: pins 32..54 interrupting on icu irq 178
gpio0 at bcmgpio0: 54 pins
bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
/soc/power at simplebus1 not configured
bsciic0 at simplebus1: Broadcom Serial Controller
iic0 at bsciic0: I2C bus
/phy at simplebus0 not configured
bcmmbox0 at simplebus1: VC mailbox
bcmmbox0: interrupting on icu irq 193
vcmbox0 at bcmmbox0
/soc/firmware at simplebus1 not configured
genfb0 at simplebus0rpi_fb_init: addr = 0xfd876000 size = 3686400
rpi_fb_init: depth = 32
rpi_fb_init: pitch = 5120
rpi_fb_init: width = 1280 height = 720
rpi_fb_init: vwidth = 1280 vheight = 720
autoconfiguration error: : unsupported format 'a8r8g8b8'
gpioleds0 at simplebus0: ACT
/soc/timer@7e003000 at simplebus1 not configured
watchdog0 at simplebus1: Power management, Reset and Watchdog controller
bcmrng0 at simplebus1: RNG
plcom0 at simplebus1
plcom0: txfifo disabled
sdhost0 at simplebus1: SD HOST controller
sdhost0: interrupting on icu irq 184
bsciic1 at simplebus1: Broadcom Serial Controller
iic1 at bsciic1: I2C bus
/soc/pixelvalve@7e206000 at simplebus1 not configured
/soc/pixelvalve@7e207000 at simplebus1 not configured
com0 at simplebus1: BCM AUX UART, working fifo
com0: console
com0: interrupting on icu irq 157
/soc/pwm@7e20c000 at simplebus1 not configured
sdhc0 at simplebus1: SDHC controller
sdhc0: interrupting on icu irq 190
/soc/hvs@7e400000 at simplebus1 not configured
bsciic2 at simplebus1: Broadcom Serial Controller
iic2 at bsciic2: I2C bus
/soc/vec@7e806000 at simplebus1 not configured
/soc/pixelvalve@7e807000 at simplebus1 not configured
/soc/hdmi@7e902000 at simplebus1 not configured
dwctwo0 at simplebus1: USB controller
dwctwo0: interrupting on icu irq 137
/soc/v3d@7ec00000 at simplebus1 not configured
/soc/gpu at simplebus1 not configured
/soc/fb at simplebus1 not configured
/soc/vchiq at simplebus1 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu_boot_secondary_processors: writing mbox with 0xe
cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu1: Dcache line 64, Icache line 64
cpu1: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu1: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu1: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu3: Dcache line 64, Icache line 64
cpu3: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu3: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu3: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu2: Dcache line 64, Icache line 64
cpu2: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu2: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu2: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu_boot_secondary_processors: secondary processors hatched
sdmmc0 at sdhost0
sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc1 at sdhc0 slot 0
usb0 at dwctwo0: USB revision 2.0
uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
sdhc0: cmd timeout error
ld0 at sdmmc0: <0x03:0x5344:SU02G:0x80:0x10f597b8:0x076>
ld0: 1938 MB, 984 cyl, 64 head, 63 sec, 512 bytes/sect x 3970048 sectors
ld0: 4-bit width, 25.000 MHz
IPsec: Initialized Security Association Processing.
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 1 not configured
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
uhub1 at uhub0 port 1: vendor 0424 (0x424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2
uhub1: multiple transaction translators
uhub1: 5 ports with 4 removable, self powered
usmsc0 at uhub1 port 1
usmsc0: vendor 0424 (0x424) product ec00 (0xec00), rev 2.00/2.00, addr 3
usmsc0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhub2 at uhub1 port 5: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/32.98, addr 4
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
uhub0: autoconfiguration error: illegal enable change, port 1
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: Generic (0x14cd) USB Mass Storage Device (0x6116), rev 2.00/2.20, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Mass, Storage Device, 0\0000> disk fixed
sd0: 111 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 234441646 sectors
WARNING: 2 errors while detecting hardware; check system log.
boot device: ld0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/evbarm/8.99.21/modules

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.