Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-07-18 21:55:13
From: Sevan / Venture37
Description: Jetway J7F2WE1G5D-OC-PB with AD3RTLAN-G module for 3x re(4) interfaces and PCI Ralink RT2560 wifi adapter
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.22 (GENERIC) #0: Wed Jul 18 13:39:36 UTC 2018 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC total memory = 494 MB avail memory = 466 MB cpu_rng: VIA rnd: seeded with 128 bits timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 ( ) mainbus0 (root) ACPI: RSDP 0x00000000000F7EE0 000014 (v00 CN700 ) ACPI: RSDT 0x000000001EEE3000 000034 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 0x000000001EEE3080 000074 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 0x000000001EEE3100 00647C (v01 CN700 AWRDACPI 00001000 MSFT 03000000) ACPI: FACS 0x000000001EEE0000 000040 ACPI: _HPT 0x000000001EEE9600 000038 (v01 CN700 AWRDACPI 42302E31 AWRD 00000098) ACPI: _WDT 0x000000001EEE9640 000047 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 0x000000001EEE9580 00005A (v01 CN700 AWRDACPI 42302E31 AWRD 00000000) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x3, 24 pins cpu0 at mainbus0 apid 0 cpu0: VIA Esther processor 1500MHz, id 0x6a9 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20180427 acpi0: X/RSDT: OemId <CN700 ,AWRDACPI,42302e31>, AslId <AWRD,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button MEM (PNP0C01) at acpi0 not configured PMIO (PNP0C02) at acpi0 not configured WDRT (PNP0C02) at acpi0 not configured SYSR (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 COPR (PNP0C04) at acpi0 not configured FDC0 (PNP0700) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured UAR2 (PNP0501) at acpi0 not configured LPT1 (PNP0400) at acpi0 not configured acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan acpitz0 at acpi0 (THRM): cpu0 acpitz0: active cooling level 0: 50.0C acpitz0: levels: critical 60.0 C, passive 50.0 C apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 1106 product 0314 (rev. 0x00) agp0 at pchb0: aperture at 0xf8000000, size 0x2000000 pchb1 at pci0 dev 0 function 1: vendor 1106 product 1314 (rev. 0x00) pchb2 at pci0 dev 0 function 2: vendor 1106 product 2314 (rev. 0x00) pchb3 at pci0 dev 0 function 3: vendor 1106 product 3208 (rev. 0x00) pchb4 at pci0 dev 0 function 4: vendor 1106 product 4314 (rev. 0x00) pchb5 at pci0 dev 0 function 7: vendor 1106 product 7314 (rev. 0x00) ppb0 at pci0 dev 1 function 0: vendor 1106 product b198 (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga0 at pci1 dev 0 function 0: vendor 1106 product 3344 (rev. 0x01) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at vga0 not configured ral0 at pci0 dev 8 function 0: vendor 1814 product 0201 (rev. 0x01) ral0: interrupting at ioapic0 pin 17 ral0: 802.11 address 00:11:09: ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps re0 at pci0 dev 9 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10) re0: interrupting at ioapic0 pin 18 re0: Ethernet address 00:30:18: re0: using 256 tx descriptors rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto fwohci0 at pci0 dev 10 function 0: vendor 1106 product 3044 (rev. 0x80) fwohci0: interrupting at ioapic0 pin 19 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:30:18:00:00: fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset re1 at pci0 dev 11 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10) re1: interrupting at ioapic0 pin 19 re1: Ethernet address 00:30:18: re1: using 256 tx descriptors rgephy1 at re1 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re2 at pci0 dev 12 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10) re2: interrupting at ioapic0 pin 16 re2: Ethernet address 00:30:18: re2: using 256 tx descriptors rgephy2 at re2 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2 rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto viaide0 at pci0 dev 15 function 0: VIA Technologies VT8237 SATA Controller (rev. 0x80) viaide0: bus-master DMA support present viaide0: primary channel configured to native-PCI mode viaide0: using ioapic0 pin 20 for native-PCI interrupt atabus0 at viaide0 channel 0 viaide0: secondary channel configured to native-PCI mode atabus1 at viaide0 channel 1 viaide1 at pci0 dev 15 function 1 viaide1: VIA Technologies VT8237 ATA133 controller viaide1: bus-master DMA support present viaide1: primary channel configured to compatibility mode viaide1: primary channel interrupting at ioapic0 pin 14 atabus2 at viaide1 channel 0 viaide1: secondary channel configured to compatibility mode viaide1: secondary channel interrupting at ioapic0 pin 15 atabus3 at viaide1 channel 1 uhci0 at pci0 dev 16 function 0: vendor 1106 product 3038 (rev. 0x81) uhci0: interrupting at ioapic0 pin 21 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 16 function 1: vendor 1106 product 3038 (rev. 0x81) uhci1: interrupting at ioapic0 pin 21 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 16 function 2: vendor 1106 product 3038 (rev. 0x81) uhci2: interrupting at ioapic0 pin 21 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 16 function 3: vendor 1106 product 3038 (rev. 0x81) uhci3: interrupting at ioapic0 pin 21 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 16 function 4: vendor 1106 product 3104 (rev. 0x86) ehci0: interrupting at ioapic0 pin 21 ehci0: dropped intr workaround enabled ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 viapcib0 at pci0 dev 17 function 0: vendor 1106 product 3227 (rev. 0x00) viapcib0: SMBus found at 0x500 (revision 0x0) iic0 at viapcib0: I2C bus auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60) auvia0: interrupting at ioapic0 pin 22 auvia0: ac97: VIA Technologies unknown (0x56494170) codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D auvia0: ac97: ext id 0x9c7<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA,VRA> audio0 at auvia0: full duplex, playback, capture, mmap, independent auvia0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 auvia0: Latency: 8 milliseconds vr0 at pci0 dev 18 function 0: vendor 1106 product 3065 (rev. 0x78) vr0: interrupting at ioapic0 pin 23 vr0: Ethernet address: 00:30:18: ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0032, rev. 10 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at viapcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: C2: I/O, lat 80 us, pow 0 mW acpicpu0: C3: I/O, lat 800 us, pow 0 mW acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 50 % viac7temp0 at cpu0: VIA C7 temperature sensor fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered IPsec: Initialized Security Association Processing. uhub5 at uhub4 port 3: Apple, Inc. (0x5ac) Keyboard Hub (0x1006), class 9/0, rev 2.00/95.15, addr 2 uhub5: single transaction translator uhub5: 3 ports with 2 removable, bus powered wd0 at atabus2 drive 0 wd0: <HDS728080PLAT20> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) uhidev0 at uhub5 port 2 configuration 1 interface 0 uhidev0: Apple, Inc (0x5ac) Apple Keyboard (0x221), rev 2.00/0.69, addr 3, iclass 3/1 ukbd0 at uhidev0: 8 Variable keys, 5 Array codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 2 configuration 1 interface 1 uhidev1: Apple, Inc (0x5ac) Apple Keyboard (0x221), rev 2.00/0.69, addr 3, iclass 3/0 uhid0 at uhidev1: input=1, output=0, feature=0 boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/i386/8.99.22/modules wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)