Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-08-15 22:19:09
From: Mark Saad
Description: Cisco Tandberg Codian ISDN GW 3241 Running NetBSD 1.6
calling ksyms_init (startkernel=0x090000 endkernel=0x58f000 edata=0x0 end=0x7f454c46 startsym=0x543580 endsym=0x58424c
ksyms_init
Loaded initial symtab at 0x543580, strtab at 0x565b34, # entries 8190
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.6ZG (LANGLEY) #MJITC_N_1_48: Mon Jun 25 17:43:43 BST 2012
TANDBERG@BUILDMACHINE:LANGLEY
total memory = 240 MB
avail memory = 214 MB
using 3072 buffers containing 12388 KB of memory
sysctl_createv: sysctl_create(cacheinfo) returned 17
mainbus0 (root)mainbus_attach
eumbbus_match: cpu eumbbus
cpu0 at mainbus0: Version 0x8081 (Revision 0x1014), ID 0 (primary)
cpu0: HID0 90c000<DOZE,DPM,ICE,DCE>
config_found cpu done
eumbbus_match: eumbbus eumbbus
eumbbus0 at mainbus0eumbbus_attach
eumbbus_submatch
com32 at eumbbus0com_eumbbus_attach
bus_space_map(00302c0c, fc004500, 00000008..)
sc_ioh=fc004500
com_attach_subr iot=00302c0c ioh=fc004500 type=00000000 freq=06baa800
: ns16550a, working fifo
com32: console
intr_establish 00000014
00011120
eumbbus_submatch
com33 at eumbbus0com_eumbbus_attach
bus_space_map(00302c0c, fc000000, 00000008..)
sc_ioh=fc004600
com_attach_subr iot=00302c0c ioh=fc004600 type=00000000 freq=06baa800
: ns16550a, working fifo
intr_establish 00000015
00011140
about to setup pci
calling pci configurepci_conf_interrupt bus 0x00000000 dev 0x00000000
line=0xff
pci_conf_interrupt bus 0x00000000 dev 0x00000010
line=0x00
pci_conf_interrupt bus 0x00000000 dev 0x00000011
line=0x01
pci_conf_interrupt bus 0x00000001 dev 0x00000002
line=0x09
pci_conf_interrupt bus 0x00000002 dev 0x00000000
line=0x0f
pci_conf_interrupt bus 0x00000002 dev 0x00000001
line=0x0f
pci_conf_interrupt bus 0x00000002 dev 0x00000002
line=0x0f
pci_conf_interrupt bus 0x00000002 dev 0x00000003
line=0x0f
pci_conf_interrupt bus 0x00000002 dev 0x00000004
line=0x0f
pci_conf_interrupt bus 0x00000002 dev 0x00000005
line=0x0f
pci_conf_interrupt bus 0x00000003 dev 0x00000000
line=0x0f
pci_conf_interrupt bus 0x00000003 dev 0x00000000
line=0x0f
configure_bus 0
configure_bridge 1
Bus 1 mem_base=80000000 mem_limit=85ffffff
configure_bus 1
configure_bridge 2
Bus 2 mem_base=80000000 mem_limit=84ffffff
configure_bus 2
configure_bridge 3
Bus 3 mem_base=85000000 mem_limit=857fffff
configure_bus 3
eumbbus_match: pci eumbbus
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled
aceride_match 00061057
satalink_match 00061057
vendor 0x1057 product 0x0006 (host bridge, revision 0x14) at pci0 dev 0 function 0 not configured
aceride_match 165314e4
satalink_match 165314e4
bge0 at pci0 dev 16 function 0: Broadcom BCM5705M Gigabit Ethernet
pci_mapreg_map 00000010 type 4 tag=0xd006d2b4 h=0xd006d2b0
pci_mem_find
bge0: ASIC BCM5705 A3, Ethernet address 000000000
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
aceride_match 165314e4
satalink_match 165314e4
bge1 at pci0 dev 17 function 0: Broadcom BCM5705M Gigabit Ethernet
pci_mapreg_map 00000010 type 4 tag=0xd00712b4 h=0xd00712b0
pci_mem_find
bge1: ASIC BCM5705 A3, Ethernet address 000000000
brgphy1 at bge1 phy 1: BCM5705 1000BASE-T media interface, rev. 2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
aceride_match ac28104c
satalink_match ac28104c
ppb0 at pci0 dev 20 function 0: vendor 0x104c product 0xac28 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
aceride_match 905610b5
satalink_match 905610b5
vendor 0x10b5 product 0x9056 (miscellaneous bridge, revision 0xba) at pci1 dev 2 function 0 not configured
aceride_match ac28104c
satalink_match ac28104c
ppb1 at pci1 dev 3 function 0: vendor 0x104c product 0xac28 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
aceride_match 9065104c
satalink_match 9065104c
vendor 0x104c product 0x9065 (miscellaneous prehistoric, revision 0x01) at pci2 dev 0 function 0 not configured
aceride_match 9065104c
satalink_match 9065104c
vendor 0x104c product 0x9065 (miscellaneous prehistoric, revision 0x01) at pci2 dev 1 function 0 not configured
aceride_match 9065104c
satalink_match 9065104c
vendor 0x104c product 0x9065 (miscellaneous prehistoric, revision 0x01) at pci2 dev 2 function 0 not configured
aceride_match 9065104c
satalink_match 9065104c
vendor 0x104c product 0x9065 (miscellaneous prehistoric, revision 0x01) at pci2 dev 3 function 0 not configured
aceride_match 9065104c
satalink_match 9065104c
vendor 0x104c product 0x9065 (miscellaneous prehistoric, revision 0x01) at pci2 dev 4 function 0 not configured
aceride_match 9065104c
satalink_match 9065104c
vendor 0x104c product 0x9065 (miscellaneous prehistoric, revision 0x01) at pci2 dev 5 function 0 not configured
aceride_match ac28104c
satalink_match ac28104c
ppb2 at pci1 dev 6 function 0: vendor 0x104c product 0xac28 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
aceride_match ac55104c
satalink_match ac55104c
cbb1 at pci3 dev 0 function 0: vendor 0x104c product 0xac55 (rev. 0x01)
pa_iot=00302afc pa_memt=00302c0c pa_flags=00000003 pa_bus=00000003 pa_device=00000000
rbus_new_body: [2000, 2800] type dedicated name [rbus root]
pa_iot=00302afc pa_memt=00302c0c pa_flags=00000003 pa_bus=00000003 pa_device=00000000
base=80000000 offs=00000000 limit=fe000000 extent=0x333240
extent `iomem' (0x80000000 - 0xfdffffff), flags = 0x3
res=85000000
rbus_new_body: [85004000, 85008000] type dedicated name [rbus root]
sock_base=85000000
pci_mapreg_map 00000010 type 0 tag=0xd005ca48 h=0xd005ca4c
pci_mem_find
aceride_match ac55104c
satalink_match ac55104c
cbb0 at pci3 dev 0 function 1: vendor 0x104c product 0xac55 (rev. 0x01)
pa_iot=00302afc pa_memt=00302c0c pa_flags=00000003 pa_bus=00000003 pa_device=00000001
rbus_new_body: [2800, 3000] type dedicated name [rbus root]
pa_iot=00302afc pa_memt=00302c0c pa_flags=00000003 pa_bus=00000003 pa_device=00000001
base=80000000 offs=00000000 limit=fe000000 extent=0x333240
extent `iomem' (0x80000000 - 0xfdffffff), flags = 0x3
res=85001000
rbus_new_body: [85009000, 8500d000] type dedicated name [rbus root]
sock_base=85001000
pci_mapreg_map 00000010 type 0 tag=0xd005c848 h=0xd005c84c
pci_mem_find
pci_intr_map pin=0x03 line=0x0f
intr_establish 0000000f
000103e0
cbb1: interrupting at irq 15
cardslot1 at cbb1 slot 1 flags 0
cardslot1 attaching CardBus bus...
cardbus1 at cardslot1: bus 4 device 0
cardslotattach: found cardbus on cardslot1
pcmcia1 at cardslot1
cardslotattach: found 16-bit pcmcia bus
cardbusattach: 16-bit card found
cardslot_event_throw: an event 16-bit Card inserted comes
pci_intr_map pin=0x03 line=0x0f
intr_establish 0000000f
000103e0
cbb0: interrupting at irq 15
cardslot0 at cbb0 slot 0 flags 0
cardslot0 attaching CardBus bus...
cardbus0 at cardslot0: bus 5 device 0
cardslotattach: found cardbus on cardslot0
pcmcia0 at cardslot0
cardslotattach: found 16-bit pcmcia bus
cardbusattach: 16-bit card found
cardslot_event_throw: an event 16-bit Card inserted comes
mainbus attach done
kthread_create
biomask 8000 netmask 8000 ttymask 8000
*** dll_stat_reg=91f000c1
ccdattach
Kernelized RAIDframe activated
i2c_attach
demux_table=0xf100000:0xf23ffff(00140000)
descrs=0xf000000:0xf03ffff(00040000)
mbtrace=0xf200000:0xf5fffff(00400000)
Product serial number = [REMOVED]
board_init
pcmcia card attach
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: SanDisk, SDP, 5/3 0.6
pcmcia1: Manufacturer code 0x45, product 0x401
pcmcia1: function 0: fixed disk(ata), ccr addr 200 mask f
pcmcia1: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; maxtwins 1; mwait_required rdybsy_active powerdown
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia1: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia1: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia1: function 0, config table entry 7: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
wdc1 at pcmcia1 function 0function type 00000000
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
memory mapped mode
wdc pcmcia memmode, noirq
atabus1 at wdc1 channel 0
pcmcia card attach
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: SILICONSYSTEMS, VER2.00
pcmcia0: Manufacturer code 0x0, product 0x0
pcmcia0: function 0: fixed disk(ata), ccr addr 200 mask f
pcmcia0: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; maxtwins 1; mwait_required rdybsy_active powerdown
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 7: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
wdc0 at pcmcia0 function 0function type 00000000
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
memory mapped mode
wdc pcmcia memmode, noirq
atabus0 at wdc0 channel 0
wd1 at atabus1 drive 0: <SanDisk SDCFH-512>
wd1: drive supports 1-sector PIO transfers, LBA addressing
wd1: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944 sectors
wd1: drive supports PIO mode 4
wd0 at atabus0 drive 0: <SILICONSYSTEMS INC 256MB>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 248 MB, 994 cyl, 16 head, 32 sec, 512 bytes/sect x 508928 sectors
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
wd1: no disk label
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
howto 2 bootdev 0 boot device: wd0
root on wd0a dumps on wd0b
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
about to call domountroothook
about to call vfs_mountroot
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
rtcinit()
Cold Boot - power down at 00:20:09.00 08/12/15
Time is now 00:20:54.87 08/12/15
root file system type: ffs
Dec 8 00:20:57 init: /etc/pwd.db: No such file or directory
fsck: Cannot open `/etc/fstab': No such file or directory
fsck: Cannot open `/etc/fstab': No such file or directory
** /dev/rwd0b
** Phase 1 - Read and Compare FATs
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
17 files, 62520 free (31260 clusters)
fsck: Cannot open `/etc/fstab': No such file or directory
fsck: Cannot open `/etc/fstab': No such file or directory
** /dev/rwd0d
** Last Mounted on /rdwr
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
51 files, 364 used, 7523 free (19 frags, 938 blocks, 0.2% fragmentation)
MARK FILE SYSTEM CLEAN? yes
***** FILE SYSTEM MARKED CLEAN *****
***** FILE SYSTEM WAS MODIFIED *****
atactl: wd2: Device not configured
Can't read atactrl wd2 identify: Undefined error: 0
Hit Ctrl+C in the next 5 seconds to prevent application start
RUNNING APPLICATION
net.inet.icmp.rediraccept: 1 -> 0
net.inet6.icmp6.rediraccept: 1 -> 0
/dev/rmd0c: 1.0MB (2048 sectors) block size 4096, fragment size 512
using 4 cylinder groups of 0.25MB, 64 blks, 96 inodes.
super-block backups (for fsck -b #) at:
32, 544, 1056, 1568,
cfev: driver loaded successfully - built at Dec 7 2004 12:46:29
Module loaded as ID 0
arch_init: not imposing a hard file limit
net.inet.ip.ifq.maxlen: 50 -> 500
net.inet.udp.checksum: 1 -> 0
ftrace_inited = 0x0
ftrace_init done
user mbuf init
sendbatch_init
002113.851 SYSTEM : Info : Cisco TelePresence ISDN GW 3241 2.2(1.106)P (Build B.4.9(1.106)P) starting
002113.901 SYSTEM : Info : device configuration successfully loaded
net.inet.tcp.keepidle: 14400 -> 120
net.inet.tcp.keepintvl: 150 -> 20
net.inet.tcp.keepcnt: 8 -> 4
002115.066 HEALTH_MONITOR : Info : Temperature 0 = 31.0
002115.071 HEALTH_MONITOR : Info : Temperature 1 = 28.0
002115.071 SYSTEM : Info : Disabling core dumps
002115.093 UPGRADE : Info : clearing local features cache
002115.291 UPGRADE : Info : Hardware compatibility: 00000002 / 00000002
002115.362 CUSTOMIZATION : Info : customisation configuration read; starting with 1-off 2-off
002115.383 CUSTOMIZATION : Info : Doing customisation resources init
002115.644 CONNECTION : Info : connection_manager_init
DSP_TRACE(ff) : dsp : init begin
pci_init()
DSP_TRACE(ff) : dsp : init done
opening DSP 00
DSP 00 handle 0x302e900
PCI bridge found at bus 1 dev 3
DM642 found at bus 2 dev 0
DM642 found at bus 2 dev 1
DM642 found at bus 2 dev 2
DM642 found at bus 2 dev 3
DM642 found at bus 2 dev 4
DM642 found at bus 2 dev 5
loading dsp image "mcudsp.out" on 00 0x302e900
load done on 0x302e900 495
hsi at 00000c30
DSP(00) : os_error:*** DSP_ID=0x0 booted
DSP(00) : os_error:vs_thread stack: local 0x1DAEC (0x33333333) ... global 0x80012D1C (0x0)
DSP(00) : os_error:as_thread stack: local 0x1F6EC (0x22222222) ... global 0x8004B388 (0x0)
reg done
sending dtod init complete to 00 (0x302e900)
002122.450 MEDIA_STREAMS : Info : all DSPs now initialised
002122.450 CONNECTION : Info : mps_new_dsp, context=0x0, DSP=0
002122.451 SYSTEM : Info : Media DSP booted
sendbatch_init
loading dsp image "mcudsp.out" on 03 0x3ad4c00
load done on 0x3ad4c00 149
All DSPs booted, ready to go!
loading dsp image "mcudsp.out" on 04 0x3ad4e00
002124.566 dspapi : Info : DSP(03) : "isdn dsp 03 starting (mode 2)"
load done on 0x3ad4e00 146
loading dsp image "mcudsp.out" on 05 0x3a63000
002126.468 dspapi : Info : DSP(04) : "isdn dsp 04 starting (mode 2)"
load done on 0x3a63000 148
sending dtod init complete to 03 (0x3ad4c00)
sending dtod init complete to 04 (0x3ad4e00)
sending dtod init complete to 05 (0x3a63000)
002128.390 dspapi : Info : DSP(05) : "isdn dsp 05 starting (mode 2)"
002128.390 MEDIA_STREAMS : Info : all DSPs now initialised
002128.391 SYSTEM : Info : H.320 DSPs booted
ssl init
002128.423 dspapi : Info : DSP(05) : "McBSP 0 go"
002130.341 PIPELOG : Info : network control initialised
002130.404 NETWORK : Info : Initialising IP routes
002130.497 SYSTEM : Info : Unique id initialised
002130.624 SYSTEM : Info : Unique id change thread starting
002130.953 NETWORK : Info : activating ethernet Port A with auto-negotiation
002131.223 USER_INTERFACE : Info : default text tokens loaded - 6973 tokens (UTF-8 format)
002131.499 USER_MANAGER : Info : 2 users present
002131.500 RECORD_STORAGE : Info : record_storage module initialised
002131.777 NETWORK : Info : activating ethernet Port A with auto-negotiation
002131.851 NETWORK : Info : deactivating port A IPv6
002131.852 NETWORK : Info : activating ethernet Port B with auto-negotiation
002132.083 NETWORK : Info : activating ethernet Port B with auto-negotiation
002132.137 NETWORK : Info : deactivating port B IPv6
002132.137 NETWORK : Info : activating ethernet Port A with auto-negotiation
002132.192 NETWORK : Info : activating port A IPv4 with DHCP
002132.197 NETWORK : Info : activating ethernet Port B with auto-negotiation
002132.252 NETWORK : Info : deactivating port B IPv4
002132.336 NETCONF : Info : Starting DHCP on port A IPv4, managed
002133.706 NETCONF : Info : media connect on bge1 (3)
card ready
rbus_space_alloc: addr 0, size 1000, mask fff, align 1000
wd1: no disk label
002137.659 CDR : Info : CDR storage available
002137.659 CDR : Info : Finding archived sections
002137.747 CDR : Info : Finding current sections
002143.717 CDR : Info : Creating new current sections
cfev opened by 0x1eab338 (pid=62)
shell initshell init002143.965 CDR : Info : Current sections OK
002143.966 SHELL : Info : Serial shell unsecured
002143.966 SHELL : Info : Serial shell in recovery mode.
002143.986 CONNECTION : Info : loading DSP resources
002144.263 AUDIT : Info : Audit storage available
ISDN-GW:> 002148.178 SYSTEM : Info : Unique id looking for file with name "/rdwr/persistent_id/connection_id.uid"
002148.182 SYSTEM : Info : Successfully opened file and read starting id as 63000
002148.234 CONNECTION : Info : connection capabilities init
002148.254 PORT_MANAGER : Info : Activation keys permit 1 licensed port
002148.254 PORT_MANAGER : Info : Port licenses now in use
002148.254 PORT_MANAGER : Info : Updated port license allocation; was 8, now 1
002148.254 PORT_MANAGER : Info : ISDN port 4 was enabled, now unlicensed
002148.255 PORT_MANAGER : Info : ISDN port 3 was enabled, now unlicensed
002148.255 PORT_MANAGER : Info : ISDN port 2 was enabled, now unlicensed
002148.339 <unknown> : Trace : multipart form reader reset
002148.673 SYSTEM : Info : Unique id "connection_id" was written; new allocation is 65000
002148.724 API : Info : shared components initialised
002148.794 API : Info : initialised
002148.795 SYSTEM : Info : Unique id looking for file with name "/rdwr/persistent_id/dial_plan_id.uid"
002148.797 SYSTEM : Info : Successfully opened file and read starting id as 2900
002148.797 DIAL_PLAN : Info : Hit counting is on
002148.813 SYSTEM : Info : unit has 4 physical ports, 4 logical ports
002148.824 CAPABILITIES : Info : Creating 1200 capability sets
002148.972 SYSTEM : Info : Unique id "dial_plan_id" was written; new allocation is 3000
002150.261 GATEKEEPER : Info : New gatekeeper configuration
002152.253 SIP : Info : SIP initialised
002152.254 SIP : Info : Processing early configuration
002152.254 SYSTEM : Info : SIP initialised
002152.289 SIP : Info : Starting SIP TCP service
002152.290 SIP : Info : Starting SIPS TCP service
002152.290 SIP : Info : Starting SIP UDP service
init plx
pci init
open pci device
open pci device done
plx bar0=85a00000 bar2=85800000 bar3=85900000
MARBR=00200000
f0430040
configure fpga isdnpri8.bit
002152.386 H.320 : Info : ISDN switch type: Euro ISDN
002154.313 AUDIT : Error : Audit log failed to shutdown correctly in previous boot, audits dropped.
002155.432 AUDIT : Info : Reading hashes of audit log
002155.433 AUDIT : Info : Calculating file hashes and checking against read hash
002155.433 AUDIT : Info : Completed Audit hash check
.........................................bitstream load done
isdnpri8_drv: FPGA comms ok
isdnpri8_drv: FPGA clocks ok
isdnpri8_drv: FALC comms ok
isdnpri8_drv: i2c comms ok
002158.019 ISDN : Info : configure: enabling port 1
002158.019 ISDN : Info : configure: enabling port 2
002158.020 ISDN : Info : configure: enabling port 3
002158.020 ISDN : Info : configure: enabling port 4
002158.079 WEB : Info : page services initialised
002202.492 SYSLOG : Info : sending IPv4 from default port
002202.492 SYSLOG : Info : sending IPv6 from default port
ISDN-GW:>