Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-09-09 05:33:43
From: tsutsui
Description: NetBSD/macppc 8.0 on UMAX Apus2000/200
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > boot
OF_open bootpath=ata/ATA-Disk@0
read stage 2 blocks: 0123. done!
starting stage 2...
>> NetBSD/macppc OpenFirmware Boot, Revision 1.12 (Tue Jul 17 14:59:51 UTC 2018)
Cannot use bootpath
Using boot-device instead
9831244+169904 [408320+393239]=0xa4db34
start=0x100000
mem region 0 start=0 size=4000000
avail region 0 start=0x4800 size=0x800
avail region 1 start=0x15000 size=0x3eeb000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC
total memory = 65536 KB
avail memory = 52000 KB
found ohare PIC at f3000000
bootpath: ata/ATA-Disk@0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 0x90c001<DOZE,DPM,ICE,DCE,NOPTI>, powersave: 1
cpu0: ohare L2 cache enabled
memory0 at mainbus0
bandit0 at mainbus0
pci0 at bandit0 bus 0
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x02)
ex0 at pci0 dev 13 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at irq 23
ex0: MAC address [_MAC_XXXXXXXXXX]
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
VIA Technologies VT83C572 USB Controller (USB serial bus, UHCI, revision 0x04) at pci0 dev 14 function 0 not configured
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 irq 15,16
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
cuda0 at obio0 offset 0x16000 irq 18
nadb0 at cuda0: Apple Desktop Bus
iic0 at cuda0: I2C bus
cuda0: error doing I2C
wdc0 at obio0 offset 0x20000 irq property not found; using 13: DMA transfer
atabus0 at wdc0 channel 0
vmmask 7e000000 schedmask 7e000000 highmask 7e000000
scsibus0: waiting 2 seconds for devices to settle...
adbkbd0 at nadb0 addr 2: extended keyboard
wskbd0 at adbkbd0 mux 1
wsmouse0 at adbkbd0 mux 0
adbms0 at nadb0 addr 3: 1-button, 100 dpi mouse
wsmouse1 at adbms0 mux 0
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-506, 8S05> cdrom removable
wd0 at atabus0 drive 0
wd0: <ST320011A>
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/macppc/8.0/modules
Sat Sep 8 23:07:02 JST 2018
Starting root file system check:
/dev/rwd0a: file system is clean; not checking
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: lancer
NIS domainname: xxxxxx
IPv6 mode: host
Configuring network interfaces: ex0.
Adding interface aliases:.
add net default: gateway mirage
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Starting rpcbind.
Starting ypbind.
ypbind[222]: Domain xxxxxx is alive; server[_IP_XXXXXXX]
Mounting all file systems...
Clearing temporary files.
Starting amd.
Checking quotas: done.
Starting virecover.
Checking for core dump...
savecore: no core dump
starting local daemons:.
Updating motd.
Starting ntpd.
Starting powerd.
Sep 8 22:46:35 lancer ntpd[337]: mlockall(): Cannot allocate memory
Starting sshd.
/etc/ssh/sshd_config line 7: Deprecated option ServerKeyBits
/etc/ssh/sshd_config line 9: Deprecated option KeyRegenerationInterval
/etc/ssh/sshd_config line 19: Deprecated option RhostsRSAAuthentication
/etc/ssh/sshd_config line 20: Deprecated option RSAAuthentication
/etc/ssh/sshd_config line 23: Deprecated option UseLogin
key_load_private: invalid format
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_key
Starting inetd.
Starting cron.
Sat Sep 8 22:46:49 JST 2018
NetBSD/macppc (lancer) (ttyZ0)
login: tsutsui
Password:
Sep 8 22:46:58 lancer login: tsutsui on tty ttyZ0
Last login: Wed Mar 22 01:15:41 2017 on ttyZ0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
Sat Sep 8 22:46:59 JST 2018
lancer-%