Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-09-26 12:31:52
From: redbrick
Description: NetBSD/i386 8.0(GENERIC) on Sharp PC-MP60GS(Transmeta Efficeon Processer)
opyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 998 MB
avail memory = 962 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SHARP Corporation PC-MP Series (1.0)
mainbus0 (root)
ACPI: RSDP 0x00000000000F81B0 000014 (v00 PTLTD )
ACPI: RSDT 0x000000003E6FA2FE 000030 (v01 PTLTD RSDT 06040005 LTP 00000000)
ACPI: FACP 0x000000003E6FEDF1 000074 (v01 PTLTD RSDT 06040005 PTL 000F4240)
ACPI: DSDT 0x000000003E6FA32E 004AC3 (v01 PTLTD DSDT 06040005 MSFT 0100000E)
ACPI: FACS 0x000000003E6FFFC0 000040
ACPI: SSDT 0x000000003E6FEE65 0000BC (v01 PTLTD ACPICST1 06040005 LTP 00000001)
ACPI: SSDT 0x000000003E6FEF21 0000DF (v01 PTLTD ACPIPST1 06040005 LTP 00000001)
ACPI: 3 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Transmeta Efficeon(tm) Processor TM8000, id 0xf24
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <PTLTD ,RSDT ,06040005>, AslId < LTP,00000000>
LNKF: ACPI: Found matching pin for 0.4.INTA at func 0: 7
LNKG: ACPI: Found matching pin for 0.4.INTB at func 1: 7
LNKE: ACPI: Found matching pin for 0.15.INTA at func 0: 3
LNKU: ACPI: Found matching pin for 0.15.INTD at func 3: 10
LNKB: ACPI: Found matching pin for 0.9.INTA at func 0: 255
LNKC: ACPI: Found matching pin for 0.10.INTA at func 0: 5
LNKD: ACPI: Found matching pin for 0.6.INTA at func 0: 3
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 9
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (M_EC, PNP0C09): io 0x62,0x66
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
pckbc1 at acpi0 (KBC0, PNP0320) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, SYN0F02) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A): ACPI Battery
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpifan0 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan1 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan2 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan3 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpifan4 at acpi0 (FAN5, PNP0C0B-5): ACPI Fan
acpifan5 at acpi0 (FAN6, PNP0C0B-6): ACPI Fan
acpitz0 at acpi0 (TZPR)
acpitz0: active cooling level 0: 64.9C
acpitz0: active cooling level 1: 59.9C
acpitz0: active cooling level 2: 54.9C
acpitz0: levels: critical 96.9 C
acpitz1 at acpi0 (TZVD)
acpitz1: active cooling level 0: 99.9C
acpitz1: active cooling level 1: 94.9C
acpitz1: active cooling level 2: 89.9C
acpitz1: levels: critical 101.9 C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.8
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1279 product 0060 (rev. 0x00)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 1279 product 0061 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 1002 product 4c57 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb1 at pci0 dev 2 function 0: vendor 10b9 product 5249 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pcib0 at pci0 dev 3 function 0: vendor 10b9 product 1563 (rev. 0x20)
alipm0 at pci0 dev 3 function 1alipm0: can't map I/O space
auacer0 at pci0 dev 4 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at irq 7
auacer0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
auacer0: ac97: ext id 0x607<AC97_22,AMAP,SPDIF,DRA,VRA>
audio0 at auacer0: full duplex, playback, capture, mmap, independent
auacer0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
auacer0: Latency: 256 milliseconds
vendor 10b9 product 5457 (modem communications, revision 0x10) at pci0 dev 4 function 1 not configured
ath0 at pci0 dev 6 function 0: Atheros 5212
ath0: interrupting at irq 3
ath0: unable to attach hardware; HAL status 13
cbb0 at pci0 dev 9 function 0: vendor 1180 product 0475 (rev. 0x81)
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 5
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aceride0 at pci0 dev 14 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc5)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
ohci0 at pci0 dev 15 function 0: vendor 10b9 product 5237 (rev. 0x03)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 15 function 3: vendor 10b9 product 5239 (rev. 0x01)
ehci0: interrupting at irq 10
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 2 ports: ohci0
usb1 at ehci0: USB revision 2.0
isa0 at pcib0
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x24000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
LNKB: Picked IRQ 10 with weight 1
cbb0: interrupting at irq 10
cardslot0 at cbb0
pcmcia0 at cardslot0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: P-states not supported
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: C2: I/O, lat 15 us, pow 0 mW
acpicpu0: C3: I/O, lat 128 us, pow 0 mW
acpicpu0: P0: I/O, lat 20 us, pow 17600 mW, 1600 MHz
acpicpu0: P1: I/O, lat 20 us, pow 15400 mW, 1400 MHz
acpicpu0: P2: I/O, lat 20 us, pow 7981 mW, 800 MHz
acpicpu0: P3: I/O, lat 20 us, pow 5055 mW, 533 MHz
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 10b9 (0x10b9) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 10b9 (0x10b9) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 6 ports with 6 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <HTS541010G9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-812, , K100> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/8.0/modules
WARNING: clock gained 65 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)