Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-09-26 12:39:48
From: redbrick
Description: NetBSD/i386 7.1 (GENERIC.201703111743Z) on Sony PCG-U1(VAIO U1) (Transmeta Crusoe Processer)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.1 (GENERIC.201703111743Z)
total memory = 367 MB
avail memory = 344 MB
kern.module.path=/stand/i386/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Sony Corporation PCG-U1(J) (01)
mainbus0 (root)
ACPI: RSDP 0xf7bc0 000014 (v00 PTLTD )
ACPI: RSDT 0x16efb759 00002C (v01 SONY   E0       20020814  LTP 00000000)
ACPI: FACP 0x16efee82 000084 (v02 SONY   E0       20020814 PTL  01000000)
ACPI: DSDT 0x16efb785 0036FD (v01   SONY E0       20020814 MSFT 0100000D)
ACPI: FACS 0x16efffc0 000040
ACPI: SSDT 0x16efef06 0000FA (v01 PTLTD  ACPIPST1 20020814  LTP 00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0: Transmeta(tm) Crusoe(tm) Processor TM5800, id 0x543
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <SONY  ,E0      ,20020814>, AslId < LTP,00000000>
LNK8: ACPI: Found matching pin for 0.6.INTA at func 0: 9
LNK2: ACPI: Found matching pin for 0.9.INTA at func 0: 9
LNK3: ACPI: Found matching pin for 0.11.INTA at func 0: 9
LNK1: ACPI: Found matching pin for 0.12.INTA at func 0: 9
LNK5: ACPI: Found matching pin for 0.15.INTA at func 0: 9
LNK3: ACPI: Found matching pin for 0.18.INTA at func 0: 255
LNKU: ACPI: Found matching pin for 0.20.INTA at func 0: 9
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
sony0 at acpi0 (SNC, SNY5001): Sony Miscellaneous Controller
ACPI Warning: \_SB_.PCI0.ISA_.SNC_.GCMI: Insufficient arguments - Caller passed 0, method requires 1 (20131218/nsarguments-263)
ACPI Warning: \_SB_.PCI0.ISA_.SNC_.GCMI: Insufficient arguments - Caller passed 0, method requires 1 (20131218/nsarguments-263)
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
MATH (PNP0C04) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, SNY9004) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
acpifan0 at acpi0 (LRA0, PNP0C0B-0): ACPI Fan
acpitz0 at acpi0 (ATF0)
acpitz0: active cooling level 0: 78.9C
acpitz0: levels: critical 89.9 C
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1279 product 0x0395 (rev. 0x02)
vendor 0x1279 product 0x0396 (RAM memory) at pci0 dev 0 function 1 not configured
vendor 0x1279 product 0x0397 (RAM memory) at pci0 dev 0 function 2 not configured
autri0 at pci0 dev 6 function 0: vendor 0x10b9 product 0x5451 (rev. 0x02)
autri0: interrupting at irq 9
autri0: ac97: Yamaha YMF753-S codec; 18 bit DAC, no 3D stereo
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi1 at autri0: 4DWAVE MIDI UART
pcib0 at pci0 dev 7 function 0: vendor 0x10b9 product 0x1533 (rev. 0x00)
fwohci0 at pci0 dev 9 function 0: vendor 0x104c product 0x8023 (rev. 0x00)
fwohci0: interrupting at irq 9
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:43:30
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
rtk0 at pci0 dev 11 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 9
rtk0: Ethernet address xx:xx:xx:xx:xx:xx
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga0 at pci0 dev 12 function 0: vendor 0x1002 product 0x4c59 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ohci0 at pci0 dev 15 function 0: vendor 0x10b9 product 0x5237 (rev. 0x03)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
aceride0: primary channel wired to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel wired to compatibility mode
aceride0: secondary channel ignored (disabled)
alipm0 at pci0 dev 17 function 0: 74KHz clock
iic0 at alipm0: I2C bus
cbb0 at pci0 dev 18 function 0: vendor 0x1180 product 0x0475 (rev. 0x80)
ohci1 at pci0 dev 20 function 0: vendor 0x10b9 product 0x5237 (rev. 0x03)
ohci1: interrupting at irq 9
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
isa0 at pcib0
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x24000
cbb0: interrupting at irq 9
cardslot0 at cbb0
cardbus0 at cardslot0: bus 1
pcmcia0 at cardslot0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: P-states not supported
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat  15 us, pow     0 mW
acpicpu0: C3: I/O, lat  82 us, pow     0 mW
acpicpu0: P0: ???, lat  32 us, pow 20480 mW,  867 MHz
acpicpu0: P1: ???, lat  32 us, pow 16384 mW,  800 MHz
acpicpu0: P2: ???, lat  32 us, pow 12288 mW,  667 MHz
acpicpu0: P3: ???, lat  32 us, pow  8192 mW,  533 MHz
acpicpu0: P4: ???, lat  32 us, pow  4096 mW,  367 MHz
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x10b9 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x10b9 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/24.01, addr 2, iclass 3/1
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2
umass0: using ATAPI over CBI with CCI
atapibus0 at umass0: 2 targets
ukbd0 at uhidev0
sd0 at atapibus0 drive 0: <Sony, MSC-U03, 1.00> disk removable
sd0: drive offline
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/24.01, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub1 port 1 configuration 1 interface 2
uhidev2: Logitech USB Receiver, rev 2.00/24.01, addr 2, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK6006GAH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
urtwn0 at uhub1 port 2
urtwn0: ELECOM WDC-150SU2M, rev 2.00/0.00, addr 3
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address xx:xx:xx:xx:xx:xx
urtwn0: 1 rx pipe, 2 tx pipes
urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 79 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
acpibat0: normal capacity on 'charge state'