Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-09-26 13:00:54
From: redbrick
Description: NetBSD/i386 7.1 (FJ70U_GEN) on Sharp PC-FJ70U(Intel Pentium II 400MHz, esm driver deleted from Generic kernel)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.1 (FJ70U_GEN) #0: Mon Feb 12 00:20:37 JST 2018
        xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/FJ70U_GEN
total memory = 319 MB
avail memory = 297 MB
kern.module.path=/stand/i386/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Generic PC
mainbus0 (root)
ACPI: RSDP 0xf6c40 000014 (v00 PTLTD )
ACPI: RSDT 0x13ffbb01 000028 (v01 PTLTD    RSDT   00000000  LTP 00000000)
ACPI: FACP 0x13fffb8c 000074 (v01 TWHEAD P93SE    00000000 PTL  000F4240)
ACPI: DSDT 0x13ffbb29 004063 (v01 PTLTD  TWINHEAD 00000000 MSFT 0100000B)
ACPI: FACS 0x13ffffc0 000040
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0: Intel 686-class, 397MHz, id 0x66a
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,00000000>, AslId < LTP,00000000>
LNKD: ACPI: Found matching pin for 0.2.INTA at func 0: 255
LNKD: ACPI: Found matching pin for 0.3.INTD at func 2: 11
LNKA: ACPI: Found matching pin for 0.6.INTA at func 0: 5
LNKB: ACPI: Found matching pin for 0.7.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.10.INTA at func 0: 255
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpibut0 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (CMB1, PNP0C0A-1): ACPI Battery
acpibat1 at acpi0 (CMB2, PNP0C0A-2): ACPI Battery
FPU (PNP0C04) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MEM (PNP0C01) at acpi0 not configured
MRES (PNP0C02) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
FIR (NSC6001) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, PNP0F13) (aux port): irq 12
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 0F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x7192 (rev. 0x03)
vga0 at pci0 dev 2 function 0: vendor 0x1023 product 0x9388 (rev. 0xd3)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pcib0 at pci0 dev 3 function 0: vendor 0x8086 product 0x7110 (rev. 0x02)
piixide0 at pci0 dev 3 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 3 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 3 function 3: vendor 0x8086 product 0x7113 (rev. 0x02)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0: 24-bit timer
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
vendor 0x125d product 0x1978 (audio multimedia, revision 0x10) at pci0 dev 6 function 0 not configured
vendor 0x134d product 0x7890 (miscellaneous communications, revision 0x01) at pci0 dev 7 function 0 not configured
cbb0 at pci0 dev 10 function 0: vendor 0x104c product 0xac1e (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x21000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
LNKC: Picked IRQ 9 with weight 0
cbb0: interrupting at irq 9
cardslot0 at cbb0
pcmcia0 at cardslot0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <UJDA130, , 1.13> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0
wd0: <HTS548040M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
aue0 at uhub0 port 1
aue0: corega K.K. corega FEther USB-TXS, rev 1.10/1.01, addr 2
aue0: Ethernet address xx:xx:xx:xx:xx:xx
acphy0 at aue0 phy 1: ACXXX 10/100 media interface, rev. 0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 65 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)