Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-09-26 13:25:44
From: redbrick
Description: NetBSD/i386 7.1 (GENERIC.201703111743Z) on Sharp PC-CW60X(AMD Mobile Sempron Processer)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1 (GENERIC.201703111743Z)
total memory = 3070 MB
avail memory = 3003 MB
kern.module.path=/stand/i386/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SHARP Corporation PC-CW2 Series (Rev 1)
mainbus0 (root)
ACPI: RSDP 0xf81b0 000024 (v02 PTLTD )
ACPI: XSDT 0xbfe7fa26 000064 (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: FACP 0xbfe869f6 0000F4 (v03 SHARP YAMATO 06040000 ATI 000F4240)
ACPI: DSDT 0xbfe7fa8a 006F6C (v01 SHARP YAMATO 06040000 MSFT 0100000E)
ACPI: FACS 0xbfe88fc0 000040
ACPI: TCPA 0xbfe86b5e 000032 (v02 SHARP YAMATO 06040000 PTEC 00000000)
ACPI: ASF! 0xbfe86b90 00012B (v32 SHARP YAMATO 06040000 PTL 00000001)
ACPI: APIC 0xbfe86cbb 000046 (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: MCFG 0xbfe86d01 00003C (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: HPET 0xbfe86d3d 000038 (v01 SHARP YAMATO 06040000 LTP 00000001)
ACPI: SLIC 0xbfe86d75 000176 (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: SSDT 0xbfe86eeb 000115 (v01 SHARP YAMATO 06040000 LTP 00000001)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0: Mobile AMD Sempron(tm) Processor 3600+, id 0x70fc2
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <SHARP ,YAMATO ,06040000>, AslId < LTP,00000000>
mpacpi: PCI bus 2 int routing already done!
mpacpi: PCI bus 4 int routing already done!
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: SHARP rechargeable battery
acpibat0: granularity: low->warn 0.064 Ah, warn->full 0.064 Ah
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
MEMR (PNP0C02) at acpi0 not configured
MATH (PNP0C04) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (KBC0, PNP0320) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, SYN0F05) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: 6 20 30 46 56 72 82 100
acpiout1 at acpivga0 (CRT1, 0x0100): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpifan0 at acpi0 (FAN, PNP0C0B-1): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 60.0C
acpitz0: levels: critical 105.0 C, passive 95.0 C
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x7910 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
radeon0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791f (rev. 0x00)
radeon0: unable to reserve VGA registers for i386 radeondrmkms hack
ppb1 at pci0 dev 4 function 0: vendor 0x1002 product 0x7914 (rev. 0x00)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x01)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 5 function 0: vendor 0x1002 product 0x7915 (rev. 0x00)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0: Atheros 5424/2424
ath0: interrupting at ioapic0 pin 17
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 14.2 phy 7.0 radio 10.2
ixpide0 at pci0 dev 18 function 0: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus1 at ixpide0 channel 1
ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 17
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
ohci3: interrupting at ioapic0 pin 17
ohci3: OHCI version 1.0, legacy support
usb3 at ohci3: USB revision 1.0
ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb4 at ohci4: USB revision 1.0
ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
ehci0: applying AMD SB600/SB700 USB freeze workaround
ehci0: interrupting at ioapic0 pin 19
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
usb5 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x14)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide1 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to compatibility mode
ixpide1: primary channel interrupting at ioapic0 pin 14
atabus2 at ixpide1 channel 0
ixpide1: secondary channel configured to compatibility mode
ixpide1: secondary channel interrupting at ioapic0 pin 15
atabus3 at ixpide1 channel 1
hdaudio0 at pci0 dev 20 function 2: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC262
hdafg0: duplicate pin in association
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x438d (rev. 0x00)
ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 7 function 0: vendor 0x1180 product 0x0476 (rev. 0xb4)
fwohci0 at pci4 dev 7 function 1: vendor 0x1180 product 0x0552 (rev. 0x09)
fwohci0: interrupting at ioapic0 pin 21
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:3d:1d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci4 dev 7 function 2: vendor 0x1180 product 0x0822 (rev. 0x18)
sdhc0: interrupting at ioapic0 pin 22
sdhc0: SD Host Specification 1.0, rev.2
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
vendor 0x1180 product 0x0843 (miscellaneous system) at pci4 dev 7 function 3 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x09) at pci4 dev 7 function 4 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x04) at pci4 dev 7 function 5 not configured
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 20
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev DH-G2, socket S1)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 100 us, pow 25000 mW, 2000 MHz
acpicpu0: P1: FFH, lat 100 us, pow 21532 mW, 1800 MHz
acpicpu0: P2: FFH, lat 100 us, pow 18298 mW, 1600 MHz
acpicpu0: P3: FFH, lat 100 us, pow 6824 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 10 ports with 10 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <Hitachi HTS541610J9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ870PC, SD79 064045, 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
ugen0 at uhub1 port 1
ugen0: PIXELA CORPORATION PIX-ST130, rev 2.00/1.00, addr 2
boot device: wd0
root on wd0a dumps on wd0b
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/1
ukbd0 at uhidev0
root file system type: ffs
drm: initializing kernel modesetting (RS690 0x1002:0x791F 0x13BD:0x1054).
drm: register mmio base: 0xf0100000
drm: register mmio size: 65536
drm kern info: ATOM BIOS: ATI
radeon0: info: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: Detected VRAM RAM=100M, BAR=256M
drm: RAM width 128bits DDR
Zone kernel: Available graphics memory: 1302156 kiB
drm: radeon: 256M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: radeon: 1 quad pipes, 1 z pipes initialized.
drm: PCIE GART of 512M enabled (table at 0x00000000437D3000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0x0xdccaa000
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 18 (radeon)
drm: radeon: irq initialized.
drm: Loading RS690/RS740 Microcode
WARNING: clock gained 16 days
drm: radeon: ring at 0x00000000A0001000
DRM error in r100_ring_test: radeon: ring test failed (scratch(0x15E4)=0xCAFEDEAD)
DRM error in r100_cp_init: radeon: cp isn't working (-22).
radeon0: error: failed initializing CP (-22).
radeon0: error: Disabling GPU acceleration
DRM error in r100_cp_fini: Wait for CP idle timeout, shutting down CP.
drm kern warning: Failed to wait GUI idle while programming pipes. Bad things might happen.
drm: radeon: cp finalized
drm: Radeon Display Connectors
drm: Connector 0:
drm: VGA-1
drm: DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
drm: Connector 1:
drm: LVDS-1
drm: DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
drm: Encoders:
drm: LCD1: INTERNAL_LVTM1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xdccd0000, size 1280x800, depth 32, stride 5120
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub2 port 2 configuration 1 interface 2
uhidev2: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)