Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-09-30 12:18:04
From: sin
Description: NetBSD/amd64 Supermicro A2SDi-4C-HLN4F
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8165 MB
avail memory = 7904 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x2b<config_unit,fixed_disk>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 7f173018
Supermicro Super Server (0123456789)
mainbus0 (root)
ACPI: RSDP 0x000000007E188000 000024 (v02 SUPERM)
ACPI: XSDT 0x000000007E188098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FACP 0x000000007E18CBD8 000114 (v06 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 0x000000007E1881E8 0049F0 (v02 SUPERM SMCI--MB 01072009 INTL 20061109)
ACPI: FACS 0x000000007E1D4080 000040
ACPI: FPDT 0x000000007E18CCF0 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 0x000000007E18CD38 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SPMI 0x000000007E18CDD8 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 0x000000007E18CE20 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: WDAT 0x000000007E18CE60 0001AC (v01 SUPERM SMCI--MB 01072009 MSFT 00010013)
ACPI: APIC 0x000000007E18D010 000078 (v04 INTEL TIANO 00000001 MSFT 00000000)
ACPI: BDAT 0x000000007E18D088 000030 (v01 00000000 00000000)
ACPI: HPET 0x000000007E18D0B8 000038 (v01 SUPERM SMCI--MB 00000001 MSFT 01000013)
ACPI: UEFI 0x000000007E18D0F0 000042 (v01 SUPERM SMCI--MB 00000002 01000013)
ACPI: SSDT 0x000000007E18D138 001901 (v02 PmRef CpuPm 00003000 INTL 20061109)
ACPI: DMAR 0x000000007E18EA40 000070 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: BGRT 0x000000007E18EAB0 000038 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: HEST 0x000000007E18EAE8 0000A8 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: BERT 0x000000007E18EB90 000030 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: ERST 0x000000007E18EBC0 000230 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: EINJ 0x000000007E18EDF0 000150 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: WSMT 0x000000007E18EF40 000028 (v01 u? 01072009 AMI 00010013)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
x2APIC disabled by user and enabled by BIOS; ignoring user setting.
cpu0 at mainbus0 apid 4
cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, id 0x506f1
cpu0: package 0, core 2, smt 0
cpu1 at mainbus0 apid 12
cpu1: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, id 0x506f1
cpu1: package 0, core 6, smt 0
cpu2 at mainbus0 apid 16
cpu2: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, id 0x506f1
cpu2: package 0, core 8, smt 0
cpu3 at mainbus0 apid 24
cpu3: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, id 0x506f1
cpu3: package 0, core 12, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <SUPERM,SMCI--MB,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810E9169B8 00007A (v02 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE827DBBE008 0004B3 (v02 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE827DBBC008 00063B (v02 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE827DBC5648 000231 (v02 PmRef ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
APIC (PNP0003) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
MCH (PNP0C01) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
SPMI (IPI0001) at acpi0 not configured
WERR (PNP0C33) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 7F
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1980 (rev. 0x11)
pchb1 at pci0 dev 4 function 0: vendor 8086 product 19a1 (rev. 0x11)
vendor 8086 product 19a2 (Root Complex Event Collector system, revision 0x11) at pci0 dev 5 function 0 not configured
ppb0 at pci0 dev 6 function 0: vendor 8086 product 19a3 (rev. 0x11)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 8086 product 19e2 (Co-processor processor, revision 0x11) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 10 function 0: vendor 8086 product 19a5 (rev. 0x11)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
ppb1: link is x2 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci2 dev 0 function 0: 82580 dual-1000BaseT Ethernet (rev. 0x01)
wm0: for TX and RX interrupting at msix0 vec 0 affinity to 0
wm0: for TX and RX interrupting at msix0 vec 1 affinity to 1
wm0: for TX and RX interrupting at msix0 vec 2 affinity to 2
wm0: for TX and RX interrupting at msix0 vec 3 affinity to 3
wm0: for LINK interrupting at msix0 vec 4
wm0: PCI-Express bus
wm0: 16384 words (16 address bits) SPI EEPROM, version 3.12.0, Image Unique ID 3c480001
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: Copper
wm0: 0x34040<SPI,PCIE,NEWQUEUE,ASF_FIRM>
ukphy0 at wm0 phy 1: OUI 0x00aa00, model 0x003a, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci2 dev 0 function 1: 82580 dual-1000BaseT Ethernet (rev. 0x01)
wm1: for TX and RX interrupting at msix1 vec 0 affinity to 0
wm1: for TX and RX interrupting at msix1 vec 1 affinity to 1
wm1: for TX and RX interrupting at msix1 vec 2 affinity to 2
wm1: for TX and RX interrupting at msix1 vec 3 affinity to 3
wm1: for LINK interrupting at msix1 vec 4
wm1: PCI-Express bus
wm1: 16384 words (16 address bits) SPI EEPROM, version 3.12.0, Image Unique ID 3c480001
wm1: Ethernet address [_MAC_XXXXXXXXXX]
wm1: Copper
wm1: 0x34040<SPI,PCIE,NEWQUEUE,ASF_FIRM>
ukphy1 at wm1 phy 1: OUI 0x00aa00, model 0x003a, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 17 function 0: vendor 8086 product 19ab (rev. 0x11)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 1a03 product 1150 (rev. 0x03)
ppb3: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
genfb0 at pci4 dev 0 function 0: vendor 1a03 product 2000 (rev. 0x30)
genfb0: framebuffer at 0xde000000, size 800x600, depth 32, stride 3200
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
ismt0 at pci0 dev 18 function 0: vendor 8086 product 19ac (rev. 0x11)
ismt0: interrupting at msi2 vec 0
ahcisata0 at pci0 dev 19 function 0: vendor 8086 product 19b2 (rev. 0x11)
ahcisata0: interrupting at ioapic0 pin 20
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 4 ports, 32 slots, CAP 0xc3349f43<EMS,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ahcisata1 at pci0 dev 20 function 0: vendor 8086 product 19c2 (rev. 0x11)
ahcisata1: interrupting at ioapic0 pin 21
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.31, 4 ports, 32 slots, CAP 0xc3349f43<EMS,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
atabus4 at ahcisata1 channel 0
atabus5 at ahcisata1 channel 1
atabus6 at ahcisata1 channel 5
atabus7 at ahcisata1 channel 6
xhci0 at pci0 dev 21 function 0: vendor 8086 product 19d0 (rev. 0x11)
xhci0: interrupting at msi3 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ppb4 at pci0 dev 22 function 0: vendor 8086 product 19d1 (rev. 0x11)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ixg0 at pci5 dev 0 function 0: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 4.0.1-k
ixg0: clearing prefetchable bit
ixg0: device X550EM A
ixg0: NVM Image Version 0.05 ID 0x8, NVM Map version 1.16, OEM NVM Image version 0.06, ETrackID 80000877
ixg0: for TX/RX, interrupting at msix4 vec 0, bound queue 0 to cpu 0
ixg0: for TX/RX, interrupting at msix4 vec 1, bound queue 1 to cpu 1
ixg0: for TX/RX, interrupting at msix4 vec 2, bound queue 2 to cpu 2
ixg0: for TX/RX, interrupting at msix4 vec 3, bound queue 3 to cpu 3
ixg0: for link, interrupting at msix4 vec 4, affinity to cpu 0
ixg0: Using MSI-X interrupts with 5 vectors
ixg0: PHY OUI 0x000ac2, model 0x002a, rev. 0
ixg0: feature cap 0xfa0<TEMP_SENSOR,LEGACY_TX,FDIR,MSI,MSIX,EEE>
ixg0: feature ena 0xc20<TEMP_SENSOR,MSIX,EEE>
ixg1 at pci5 dev 0 function 1: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 4.0.1-k
ixg1: clearing prefetchable bit
ixg1: device X550EM A
ixg1: NVM Image Version 0.05 ID 0x8, NVM Map version 1.16, OEM NVM Image version 0.06, ETrackID 80000877
ixg1: for TX/RX, interrupting at msix5 vec 0, bound queue 0 to cpu 0
allocated pic msix5 type edge pin 1 level 6 to cpu1 slot 3 idt entry 117
ixg1: for TX/RX, interrupting at msix5 vec 1, bound queue 1 to cpu 1
allocated pic msix5 type edge pin 2 level 6 to cpu1 slot 4 idt entry 118
ixg1: for TX/RX, interrupting at msix5 vec 2, bound queue 2 to cpu 2
allocated pic msix5 type edge pin 3 level 6 to cpu1 slot 4 idt entry 119
ixg1: for TX/RX, interrupting at msix5 vec 3, bound queue 3 to cpu 3
allocated pic msix5 type edge pin 4 level 6 to cpu1 slot 4 idt entry 120
ixg1: for link, interrupting at msix5 vec 4, affinity to cpu 0
ixg1: Using MSI-X interrupts with 5 vectors
ixg1: PHY OUI 0x000ac2, model 0x002a, rev. 0
ixg1: feature cap 0xfa0<TEMP_SENSOR,LEGACY_TX,FDIR,MSI,MSIX,EEE>
ixg1: feature ena 0xc20<TEMP_SENSOR,MSIX,EEE>
ppb5 at pci0 dev 23 function 0: vendor 8086 product 19d2 (rev. 0x11)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ixg2 at pci6 dev 0 function 0: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 4.0.1-k
ixg2: clearing prefetchable bit
ixg2: device X550EM A
ixg2: NVM Image Version 0.05 ID 0x8, NVM Map version 1.16, OEM NVM Image version 0.06, ETrackID 8000087c
allocated pic msix6 type edge pin 0 level 6 to cpu1 slot 4 idt entry 121
ixg2: for TX/RX, interrupting at msix6 vec 0, bound queue 0 to cpu 0
allocated pic msix6 type edge pin 1 level 6 to cpu1 slot 4 idt entry 122
ixg2: for TX/RX, interrupting at msix6 vec 1, bound queue 1 to cpu 1
allocated pic msix6 type edge pin 2 level 6 to cpu1 slot 5 idt entry 123
ixg2: for TX/RX, interrupting at msix6 vec 2, bound queue 2 to cpu 2
allocated pic msix6 type edge pin 3 level 6 to cpu1 slot 5 idt entry 124
ixg2: for TX/RX, interrupting at msix6 vec 3, bound queue 3 to cpu 3
allocated pic msix6 type edge pin 4 level 6 to cpu1 slot 5 idt entry 125
ixg2: for link, interrupting at msix6 vec 4, affinity to cpu 0
ixg2: Using MSI-X interrupts with 5 vectors
ixg2: PHY OUI 0x000ac2, model 0x002a, rev. 0
ixg2: feature cap 0xfa0<TEMP_SENSOR,LEGACY_TX,FDIR,MSI,MSIX,EEE>
ixg2: feature ena 0xc20<TEMP_SENSOR,MSIX,EEE>
ixg3 at pci6 dev 0 function 1: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 4.0.1-k
ixg3: clearing prefetchable bit
ixg3: device X550EM A
ixg3: NVM Image Version 0.05 ID 0x8, NVM Map version 1.16, OEM NVM Image version 0.06, ETrackID 8000087c
allocated pic msix7 type edge pin 0 level 6 to cpu1 slot 5 idt entry 126
ixg3: for TX/RX, interrupting at msix7 vec 0, bound queue 0 to cpu 0
allocated pic msix7 type edge pin 1 level 6 to cpu1 slot 5 idt entry 127
ixg3: for TX/RX, interrupting at msix7 vec 1, bound queue 1 to cpu 1
allocated pic msix7 type edge pin 2 level 6 to cpu1 slot 6 idt entry 129
ixg3: for TX/RX, interrupting at msix7 vec 2, bound queue 2 to cpu 2
allocated pic msix7 type edge pin 3 level 6 to cpu1 slot 6 idt entry 130
ixg3: for TX/RX, interrupting at msix7 vec 3, bound queue 3 to cpu 3
allocated pic msix7 type edge pin 4 level 6 to cpu1 slot 6 idt entry 131
ixg3: for link, interrupting at msix7 vec 4, affinity to cpu 0
ixg3: Using MSI-X interrupts with 5 vectors
ixg3: PHY OUI 0x000ac2, model 0x002a, rev. 0
ixg3: feature cap 0xfa0<TEMP_SENSOR,LEGACY_TX,FDIR,MSI,MSIX,EEE>
ixg3: feature ena 0xc20<TEMP_SENSOR,MSIX,EEE>
vendor 8086 product 19d3 (miscellaneous communications, revision 0x11) at pci0 dev 24 function 0 not configured
pcib0 at pci0 dev 31 function 0: vendor 8086 product 19dc (rev. 0x11)
vendor 8086 product 19de (miscellaneous memory, revision 0x11) at pci0 dev 31 function 2 not configured
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product 19df (rev. 0x11)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
vendor 8086 product 19e0 (miscellaneous serial bus, revision 0x11) at pci0 dev 31 function 5 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 50 us, pow 10 mW
acpicpu0: P0: FFH, lat 10 us, pow 0 mW, 2200 MHz
acpicpu0: P1: FFH, lat 10 us, pow 0 mW, 2100 MHz
acpicpu0: P2: FFH, lat 10 us, pow 0 mW, 2000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 0 mW, 1900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 0 mW, 1800 MHz
acpicpu0: P5: FFH, lat 10 us, pow 0 mW, 1700 MHz
acpicpu0: P6: FFH, lat 10 us, pow 0 mW, 1600 MHz
acpicpu0: P7: FFH, lat 10 us, pow 0 mW, 1500 MHz
acpicpu0: P8: FFH, lat 10 us, pow 0 mW, 1400 MHz
acpicpu0: P9: FFH, lat 10 us, pow 0 mW, 1300 MHz
acpicpu0: P10: FFH, lat 10 us, pow 0 mW, 1200 MHz
acpicpu0: P11: FFH, lat 10 us, pow 0 mW, 1100 MHz
acpicpu0: P12: FFH, lat 10 us, pow 0 mW, 1000 MHz
acpicpu0: P13: FFH, lat 10 us, pow 0 mW, 900 MHz
acpicpu0: P14: FFH, lat 10 us, pow 0 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=91
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=91
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=91
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=91
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2200421780 Hz quality 3000
iic1 at ismt0: I2C bus
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata1 port 0: device present, speed: 6.0Gb/s
uhub2 at uhub1 port 3: vendor 05e3 (0x5e3) USB2.0 Hub (0x610), class 9/0, rev 2.00/32.98, addr 1
uhub2: multiple transaction translators
uhub2: 4 ports with 4 removable, self powered
wd0 at atabus4 drive 0
wd0: <Samsung SSD 850 EVO M.2 250GB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: GPT GUID: 97202e83-a89c-44e8-a40b-d4361039095e
dk0 at wd0: "EFI system", 262144 blocks at 4096, type: msdos
dk1 at wd0: "NetBSD", 83886080 blocks at 266240, type: ffs
dk2 at wd0: "swap", 33554432 blocks at 84152320, type: swap
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub3 at uhub2 port 1: vendor 0557 (0x557) product 7000 (0x7000), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 4 ports with 3 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhub4 at uhub2 port 2: vendor 05e3 (0x5e3) USB2.0 Hub (0x610), class 9/0, rev 2.00/32.98, addr 4
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
boot device: wd0
root on dk1 dumps on dk2
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)