Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-06 20:21:17
From: mzar
Description: HP Compaq 6005 Pro running 11.2-STABLE
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-STABLE #41 r339181: Thu Oct 4 22:36:42 CEST 2018 [_EMAIL_XXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/FOMALHAUT amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: AMD Phenom(tm) II X4 B97 Processor (3192.20-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x100f43 Family=0x10 Model=0x4 Stepping=3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant real memory = 9126805504 (8704 MB) avail memory = 7730978816 (7372 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <COMPAQ HP_RS880> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0 <Version 2.1> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1596097744 Hz quality 800 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80fe40e0, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <HPQOEM SLIC-BPC> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20171214/nsarguments-309) Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20171214/dsfield-344) ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20171214/psparse-677) pcib0: _OSC failed: AE_ALREADY_EXISTS pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x1100-0x11ff mem 0xe0000000-0xefffffff,0xf0100000-0xf010ffff,0xf0000000-0xf00fffff irq 18 at device 5.0 on pci1 vgapci0: Boot video device pcib2: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <B\M^B/, ASIC rev. 0x5761100> mem 0xf0200000-0xf020ffff,0xf0210000-0xf021ffff irq 18 at device 0.0 on pci2 bge0: CHIP ID 0x05761100; ASIC REV 0x5761; CHIP REV 0x57611; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5761 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x2110-0x2117,0x2120-0x2123,0x2118-0x211f,0x2124-0x2127,0x2100-0x210f mem 0xf0309000-0xf03093ff irq 22 at device 17.0 on pci0 ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf0304000-0xf0304fff irq 16 at device 18.0 on pci0 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf0305000-0xf0305fff irq 16 at device 18.1 on pci0 usbus1 on ohci1 usbus1: 12Mbps Full Speed USB v1.0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf0309400-0xf03094ff irq 17 at device 18.2 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf0306000-0xf0306fff irq 18 at device 19.0 on pci0 usbus3 on ohci2 usbus3: 12Mbps Full Speed USB v1.0 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf0307000-0xf0307fff irq 18 at device 19.1 on pci0 usbus4 on ohci3 usbus4: 12Mbps Full Speed USB v1.0 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf0309500-0xf03095ff irq 19 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 hdac0: <ATI SB600 HDA Controller> mem 0xf0300000-0xf0303fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf0308000-0xf0308fff irq 18 at device 20.5 on pci0 usbus6 on ohci4 usbus6: 12Mbps Full Speed USB v1.0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: cannot reserve I/O port range hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC662 (Rear Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa0 pcm2: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa0 ugen1.1: <ATI OHCI root HUB> at usbus1 ugen2.1: <ATI EHCI root HUB> at usbus2 ugen6.1: <ATI OHCI root HUB> at usbus6 ugen0.1: <ATI OHCI root HUB> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen3.1: <ATI OHCI root HUB> at usbus3 ugen4.1: <ATI OHCI root HUB> at usbus4 ugen5.1: <ATI EHCI root HUB> at usbus5 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Hitachi HDS721050CLA662 JP2OA41A> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 ada1: <WDC WD2500AAKX-75U6AA0 19.01H19> ATA8-ACS SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 238475MB (488397168 512 byte sectors) ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 ada2: <ST3500320AS SD1A> ATA8-ACS SATA 2.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors) cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <hp DVD A DH16ACSH JHD6> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zvol/ROOT/default [rw]... uhub3: 2 ports with 2 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub5: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered Root mount waiting for: usbus5 usbus2 Root mount waiting for: usbus5 usbus2 uhub2: 6 ports with 6 removable, self powered uhub6: 6 ports with 6 removable, self powered random: unblocking device. ugen1.2: <vendor 0x1a86 USB2.0-Print> at usbus1 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 Cuse v0.1.35 @ /dev/cuse amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device device_attach: acpi_wmi0 attach returned 6 lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP ulpt0 on uhub0 ulpt0: <vendor 0x1a86 USB2.0-Print, class 0/0, rev 1.10/2.54, addr 2> on usbus1 ulpt0: using bi-directional mode