Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-07 03:12:24
From: Bdragon
Description: Talos II Lite with DD2.1 POWER9
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #0 r339210M: Fri Oct  5 21:55:00 CDT 2018
    xxx@xxx.xxx:/usr/obj/usr/src/powerpc.powerpc64/sys/BDRAGON-PRODUCTION powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT: init without driver.
cpu0: IBM POWER9 revision 2.1, 2500.00 MHz
cpu0: Features dc007182<PPC32,PPC64,ALTIVEC,FPU,MMU,SMT,ISNOOP,ARCH205,ARCH206,VSX,TRUELE>
cpu0: Features2 eee00000<ARCH207,HTM,DSCR,ISEL,TAR,VCRYPTO,ARCH300,IEEE128,DARN>
real memory  = 25688526848 (24498 MB)
avail memory = 24457867264 (23324 MB)
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
random: registering fast source PowerISA DARN random number generator
random: fast provider: "PowerISA DARN random number generator"
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus> mem 0x6030000000000-0x60300ffffffff on ofwbus0
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff on ofwbus0
pcib1: <OPAL Host-PCI bridge> mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff on ofwbus0
pcib2: <OPAL Host-PCI bridge> mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff on ofwbus0
pcib3: <OPAL Host-PCI bridge> mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff on ofwbus0
pcib4: <OPAL Host-PCI bridge> mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff on ofwbus0
pcib5: <OPAL Host-PCI bridge> mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff on ofwbus0
xicp0: <External Interrupt Presentation Controller> mem 0x6030203180000-0x603020318ffff,0x6030203190000-0x603020319ffff,0x60302031a0000-0x60302031affff,0x60302031b0000-0x60302031bffff on ofwbus0
xics0: <External Interrupt Source Controller> on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pmcr0: <Power Management Control Register> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
pmcr1: <Power Management Control Register> on cpu1
cpu2: <Open Firmware CPU> on cpulist0
pmcr2: <Power Management Control Register> on cpu2
cpu3: <Open Firmware CPU> on cpulist0
pmcr3: <Power Management Control Register> on cpu3
opal0: <OPAL Abstraction Firmware> irq 1048560,1048561,1048562,1048563,1048564,1048565,1048566,1048567,1048568,1048569,1048570,1048571,1048572,1048573 on ofwbus0
opal0: registered as a time-of-day clock, resolution 0.002000s
opalcons0: <OPAL Consoles> on opal0
uart0: <OPAL Serial Port> on opalcons0
uart0: console
opalsens0: <OPAL Sensors> on opal0
opal_sensor0: <OPAL sensor> on opalsens0
opal_sensor1: <OPAL sensor> on opalsens0
opal_sensor2: <OPAL sensor> on opalsens0
opal_sensor3: <OPAL sensor> on opalsens0
opal_sensor4: <OPAL sensor> on opalsens0
opal_sensor5: <OPAL sensor> on opalsens0
opal_sensor6: <OPAL sensor> on opalsens0
opal_sensor7: <OPAL sensor> on opalsens0
opal_sensor8: <OPAL sensor> on opalsens0
opal_sensor9: <OPAL sensor> on opalsens0
opal_sensor10: <OPAL sensor> on opalsens0
opal_sensor11: <OPAL sensor> on opalsens0
opal_sensor12: <OPAL sensor> on opalsens0
opal_sensor13: <OPAL sensor> on opalsens0
opal_sensor14: <OPAL sensor> on opalsens0
opal_sensor15: <OPAL sensor> on opalsens0
opal_sensor16: <OPAL sensor> on opalsens0
opal_sensor17: <OPAL sensor> on opalsens0
opal_sensor18: <OPAL sensor> on opalsens0
opal_sensor19: <OPAL sensor> on opalsens0
opal_sensor20: <OPAL sensor> on opalsens0
opal_sensor21: <OPAL sensor> on opalsens0
opal_sensor22: <OPAL sensor> on opalsens0
opal_sensor23: <OPAL sensor> on opalsens0
opal_sensor24: <OPAL sensor> on opalsens0
opal_sensor25: <OPAL sensor> on opalsens0
opal_sensor26: <OPAL sensor> on opalsens0
opal_sensor27: <OPAL sensor> on opalsens0
opal_sensor28: <OPAL sensor> on opalsens0
opal_sensor29: <OPAL sensor> on opalsens0
opal_sensor30: <OPAL sensor> on opalsens0
opal_sensor31: <OPAL sensor> on opalsens0
opal_sensor32: <OPAL sensor> on opalsens0
opal_sensor33: <OPAL sensor> on opalsens0
pci0: <OFW PCI bus> on pcib0
pcib6: <OFW PCI-PCI bridge> at device 0.0 on pci0
pci6: <OFW PCI bus> on pcib6
pci6: <multimedia, HDA> at device 0.1 (no driver attached)
vgapci0: <VGA-compatible display> mem 0x6000000000000-0x60001ffffffff,0x6000200000000-0x60002001fffff,0x80000000-0x8003ffff irq 1044472 at device 0.0 on pci6
pci1: <OFW PCI bus> on pcib1
pcib7: <OFW PCI-PCI bridge> at device 0.0 on pci1
pci7: <OFW PCI bus> on pcib7
nvme0: <Generic NVMe Device> mem 0x80000000-0x80003fff,0x80010000-0x80011fff irq 1040376 at device 0.0 on pci7
pci2: <OFW PCI bus> on pcib2
pcib8: <OFW PCI-PCI bridge> at device 0.0 on pci2
pci8: <OFW PCI bus> on pcib8
pci3: <OFW PCI bus> on pcib3
pcib9: <OFW PCI-PCI bridge> at device 0.0 on pci3
pci9: <OFW PCI bus> on pcib9
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x80000000-0x8000ffff,0x80010000-0x80011fff irq 1036280 at device 0.0 on pci9
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
pci4: <OFW PCI bus> on pcib4
pcib10: <OFW PCI-PCI bridge> at device 0.0 on pci4
pci10: <OFW PCI bus> on pcib10
bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x6024000000000-0x602400000ffff,0x6024000010000-0x602400001ffff,0x6024000020000-0x602400002ffff irq 1032184 at device 0.0 on pci10
bge0: APE FW version: NCSI v1.3.12.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x6024000030000-0x602400003ffff,0x6024000040000-0x602400004ffff,0x6024000050000-0x602400005ffff irq 1032185 at device 0.1 on pci10
bge1: APE FW version: NCSI v1.3.12.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: xx:xx:xx:xx:xx:xx
pci5: <OFW PCI bus> on pcib5
pcib11: <OFW PCI-PCI bridge> at device 0.0 on pci5
pci11: <OFW PCI bus> on pcib11
pcib12: <OFW PCI-PCI bridge> irq 1030136 at device 0.0 on pci11
pci12: <OFW PCI bus> on pcib12
pci12: <multimedia, video> at device 0.0 (no driver attached)
powernv_xscom0: <xscom> mem 0x603fc00000000-0x60403ffffffff on ofwbus0
opal_i2cm0: <centaur-i2cm> on powernv_xscom0
iichb0: <opal-i2c> on opal_i2cm0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0xa0
iichb1: <opal-i2c> on opal_i2cm0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0xa0
opal_i2cm1: <centaur-i2cm> on powernv_xscom0
iichb2: <opal-i2c> on opal_i2cm1
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
iicbus2: <unknown card> at addr 0xa0
opal_i2cm2: <centaur-i2cm> on powernv_xscom0
iichb3: <opal-i2c> on opal_i2cm2
iicbus3: <OFW I2C bus> on iichb3
iic3: <I2C generic I/O> on iicbus3
iicbus3: <unknown card> at addr 0xa0
iicbus3: <unknown card> at addr 0xa4
iichb4: <opal-i2c> on opal_i2cm2
iicbus4: <OFW I2C bus> on iichb4
iic4: <I2C generic I/O> on iicbus4
iicbus4: <unknown card> at addr 0xac
Timecounter "timebase" frequency 512000000 Hz quality 0
Event timer "decrementer" frequency 512000000 Hz quality 1000
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x104c XHCI root HUB> at usbus0
uhub0: <0x104c XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
SMP: AP CPU #1 launched
SMP: AP CPU #9 launched
SMP: AP CPU #5 launched
SMP: AP CPU #14 launched
SMP: AP CPU #7 launched
SMP: AP CPU #11 launched
SMP: AP CPU #12 launched
Root mount waiting for:SMP: AP CPU #6 launched
SMP: AP CPU #2 launched
SMP: AP CPU #8 launched
SMP: AP CPU #13 launched
SMP: AP CPU #4 launched
 usbus0
SMP: AP CPU #3 launched
SMP: AP CPU #10 launched
SMP: AP CPU #15 launched
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <ADATA SX6000NP V6005-ab 2I0820001264>
nda0: nvme version 1.2 x2 (max x2) lanes PCIe Gen3 (max Gen3) link
nda0: 122104MB (250069680 512 byte sectors)
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
uhub1: MTT enabled
uhub1: 4 ports with 4 removable, self powered

Loader variables:

Manual root filesystem specification:
  <fstype>:<device> [options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:zroot/ROOT/default
        cd9660:/dev/cd0 ro
          (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)

  ?               List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line>    Abort manual input

mountroot> 
List of GEOM managed disk devices:
  diskid/DISK-2I0820001264p3 diskid/DISK-2I0820001264p2 diskid/DISK-2I0820001264p1 gptid/9213de48-c2c9-11e8-9e01-2c094d0003f7 ufsid/5ba08c3299b5ab90 gptid/1f134864-bb03-11e8-8c6d-2c094d0003f7 gptid/f21c02be-bb02-11e8-8c6d-2c094d0003f7 diskid/DISK-2I0820001264 nda0p3 nda0p2 nda0p1 nda0

mountroot> random: unblocking device.
arc4random: no preloaded entropy cache
Trying to mount root from ufs:diskid/DISK-2I0820001264p2 []...
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP