Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-07 11:49:14
From: astral
Description: FreeBSD/amd64 on Supermicro X7DB8
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-STABLE #8: Sat Apr 13 23:22:11 EEST 2013
    xxx@xxx.xxx:/usr/obj/usr/src/sys/BM-64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz (3000.06-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Family = 0x6  Model = 0xf  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16525799424 (15760 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
aac0: <Adaptec SCSI RAID 2020ZCR> mem 0xd8200000-0xd83fffff,0xd8000000-0xd81fffff,0xc0000000-0xcfffffff irq 16 at device 1.0 on pci4
aac0: Enabling 64-bit address support
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
aac0: Adaptec 2020ZCR, aac driver 2.1.9-1
aacp0 on aac0
aacp1 on aac0
pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0x2000-0x201f mem 0xd8400000-0xd841ffff irq 18 at device 0.0 on pci6
em0: Using an MSI interrupt
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em1: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0x2020-0x203f mem 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6
em1: Using an MSI interrupt
em1: Ethernet address: xx:xx:xx:xx:xx:xx
pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci7: <ACPI PCI bus> on pcib7
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x3000-0x30ff mem 0xd8520000-0xd853ffff,0xd8500000-0xd851ffff irq 24 at device 1.0 on pci7
mpt0: MPI Version=xxx.xxx.xxx.xxx
mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (6 Max)
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f irq 17 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f irq 19 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f irq 18 at device 29.2 on pci0
usbus2 on uhci2
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd8a00000-0xd8a003ff irq 17 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xd0000000-0xd7ffffff,0xd8700000-0xd870ffff irq 18 at device 1.0 on pci11
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcffff,0xd0000-0xd07ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
aacd0 on aac0
aacd0: 559596MB (1146052608 sectors)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
(probe1:aacp1:0:1:1): INQUIRY. CDB: 12 0 0 0 24 0 
(probe1:aacp1:0:1:1): CAM status: Auto-Sense Retrieval Failed
(probe1:aacp1:0:1:1): Error 5, Unretryable error
(probe1:aacp1:0:1:2): INQUIRY. CDB: 12 0 0 0 24 0 
(probe1:aacp1:0:1:2): CAM status: Auto-Sense Retrieval Failed
(probe1:aacp1:0:1:2): Error 5, Unretryable error
(probe1:aacp1:0:1:3): INQUIRY. CDB: 12 0 0 0 24 0 
(probe1:aacp1:0:1:3): CAM status: Auto-Sense Retrieval Failed
(probe1:aacp1:0:1:3): Error 5, Unretryable error
(probe1:aacp1:0:1:4): INQUIRY. CDB: 12 0 0 0 24 0 
(probe1:aacp1:0:1:4): CAM status: Auto-Sense Retrieval Failed
(probe1:aacp1:0:1:4): Error 5, Unretryable error
(probe1:aacp1:0:1:5): INQUIRY. CDB: 12 0 0 0 24 0 
(probe1:aacp1:0:1:5): CAM status: Auto-Sense Retrieval Failed
(probe1:aacp1:0:1:5): Error 5, Unretryable error
(probe1:aacp1:0:1:6): INQUIRY. CDB: 12 0 0 0 24 0 
(probe1:aacp1:0:1:6): CAM status: Auto-Sense Retrieval Failed
(probe1:aacp1:0:1:6): Error 5, Unretryable error
(probe1:aacp1:0:1:7): INQUIRY. CDB: 12 0 0 0 24 0 
(probe1:aacp1:0:1:7): CAM status: Auto-Sense Retrieval Failed
(probe1:aacp1:0:1:7): Error 5, Unretryable error
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ata0: DMA limited to UDMA33, controller found non-ATA66 cable
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <Peppercon AG> at usbus3
ums0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus3
ums0: 3 buttons and [XYZ] coordinates ID=0
ukbd0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus3
kbd2 at ukbd0
ses0 at aacp0 bus 0 scbus0 target 6 lun 0
cd0 at ata0 bus 0 scbus4 target 1 lun 0
cd0: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ses0: <SUPER GEM318 0> Fixed Uninstalled SCSI-2 device 
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
ses1 at aacp1 bus 0 scbus1 target 6 lun 0
ses1: <SUPER GEM318 0> Fixed Uninstalled SCSI-2 device 
ses1: 3.300MB/s transfers
ses1: SAF-TE Compliant Device
pass0 at aacp0 bus 0 scbus0 target 0 lun 0
pass0: <SEAGATE ST3146707LC 0005> Fixed Uninstalled SCSI-3 device 
pass0: 3.300MB/s transfers
pass1 at aacp0 bus 0 scbus0 target 1 lun 0
pass1: <SEAGATE ST3146707LC 0005> Fixed Uninstalled SCSI-3 device 
pass1: 3.300MB/s transfers
pass2 at aacp0 bus 0 scbus0 target 2 lun 0
pass2: <SEAGATE ST3146707LC 0003> Fixed Uninstalled SCSI-3 device 
pass2: 3.300MB/s transfers
pass3 at aacp0 bus 0 scbus0 target 3 lun 0
pass3: <SEAGATE ST3146707LC 0005> Fixed Uninstalled SCSI-3 device 
pass3: 3.300MB/s transfers
pass5 at aacp1 bus 0 scbus1 target 0 lun 0
pass5: <SEAGATE ST3146707LC 0003> Fixed Uninstalled SCSI-3 device 
pass5: 3.300MB/s transfers
pass6 at aacp1 bus 0 scbus1 target 1 lun 0
pass6: <SEAGATE ST3146707LC 0005> Fixed Uninstalled SCSI-3 device 
pass6: 3.300MB/s transfers
pass7 at aacp1 bus 0 scbus1 target 2 lun 0
pass7: <SEAGATE ST3146707LC 0005> Fixed Uninstalled SCSI-3 device 
pass7: 3.300MB/s transfers
pass8 at aacp1 bus 0 scbus1 target 3 lun 0
pass8: <SEAGATE ST3146707LC 0003> Fixed Uninstalled SCSI-3 device 
pass8: 3.300MB/s transfers
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1500031516 Hz quality 1000
Trying to mount root from ufs:/dev/aacd0s1a [rw]...
Limiting closed port RST response from 394 to 200 packets/sec
Limiting closed port RST response from 343 to 200 packets/sec