Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-07 15:31:43
From: manu
Description: FreeBSD/amd64 on HP ProLiant DL160 Gen8
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #1 r336673: Tue Jul 24 19:47:30 CEST 2018
[_EMAIL_XXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC-NODEBUG amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2394.28-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 137438953472 (131072 MB)
avail memory = 133807079424 (127608 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20180629/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20180629/tbfadt-850)
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 1 6 4 5 7 3 2
Timecounter "TSC-low" frequency 1197142166 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8111df20, 0) error 19
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.4.INTA
pcib0: no PRT entry for 0.4.INTB
pcib0: no PRT entry for 0.4.INTC
pcib0: no PRT entry for 0.4.INTD
pcib0: no PRT entry for 0.4.INTA
pcib0: no PRT entry for 0.4.INTB
pcib0: no PRT entry for 0.4.INTC
pcib0: no PRT entry for 0.4.INTD
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ciss0: <HP Smart Array P420> port 0x6000-0x60ff mem 0xf7f00000-0xf7ffffff,0xf7ef0000-0xf7ef03ff irq 32 at device 0.0 on pci3
ciss0: PERFORMANT Transport
pcib4: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x5000-0x501f mem 0xf7c00000-0xf7cfffff,0xf7bf0000-0xf7bf3fff irq 34 at device 0.0 on pci5
igb0: attach_pre capping queues at 8
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 8
igb0: pxm cpus: 8 queue msgs: 9 admincnt: 1
igb0: using 8 rx queues 8 tx queues
igb0: Using MSIX interrupts with 9 vectors
igb0: allocated for 8 tx_queues
igb0: allocated for 8 rx_queues
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x5020-0x503f mem 0xf7a00000-0xf7afffff,0xf79f0000-0xf79f3fff irq 37 at device 0.1 on pci5
igb1: attach_pre capping queues at 8
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 8
igb1: pxm cpus: 8 queue msgs: 9 admincnt: 1
igb1: using 8 rx queues 8 tx queues
igb1: Using MSIX interrupts with 9 vectors
igb1: allocated for 8 tx_queues
igb1: allocated for 8 rx_queues
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib6: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <memory> at device 0.0 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.2 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 3.3 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci11: <ACPI PCI bus> on pcib11
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xf6c60000-0xf6c603ff irq 21 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci12: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> mem 0xbf000000-0xbfffffff,0xf78e0000-0xf78e3fff,0xf7000000-0xf77fffff irq 16 at device 0.1 on pci13
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 on pci13
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xf6c50000-0xf6c503ff irq 20 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib14: <PCI-PCI bridge> at device 30.0 on pci0
pci14: <PCI bus> on pcib14
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pcib15: <ACPI Host-PCI bridge> on acpi0
pci15: <ACPI PCI bus> on pcib15
pcib15: no PRT entry for 32.4.INTA
pcib15: no PRT entry for 32.4.INTB
pcib15: no PRT entry for 32.4.INTC
pcib15: no PRT entry for 32.4.INTD
pcib15: no PRT entry for 32.4.INTA
pcib15: no PRT entry for 32.4.INTB
pcib15: no PRT entry for 32.4.INTC
pcib15: no PRT entry for 32.4.INTD
pcib16: <PCI-PCI bridge> at device 0.0 on pci15
pci16: <PCI bus> on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 1.0 on pci15
pci17: <ACPI PCI bus> on pcib17
pcib18: <ACPI PCI-PCI bridge> at device 1.1 on pci15
pci18: <ACPI PCI bus> on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 2.0 on pci15
pci19: <ACPI PCI bus> on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 2.1 on pci15
pci20: <ACPI PCI bus> on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 2.2 on pci15
pci21: <ACPI PCI bus> on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 2.3 on pci15
pci22: <ACPI PCI bus> on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 3.0 on pci15
pci23: <ACPI PCI bus> on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 3.1 on pci15
pci24: <ACPI PCI bus> on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 3.2 on pci15
pci25: <ACPI PCI bus> on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 3.3 on pci15
pci26: <ACPI PCI bus> on pcib26
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff pnpid ORM0000 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <HP UHCI root HUB> at usbus1
uhub0: da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXX]
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 2861556MB (5860467632 512 byte sectors)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXX]
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 2861556MB (5860467632 512 byte sectors)
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
da3 at ciss0 bus 0 scbus0 target 3 lun 0
da3: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXX]
da3: 135.168MB/s transfers
da3: Command Queueing enabled
da3: 114439MB (234372285 512 byte sectors)
da2 at ciss0 bus 0 scbus0 target 2 lun 0
da2: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXX]
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 114439MB (234372285 512 byte sectors)
Trying to mount root from zfs:zroot/root []...
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Root mount waiting for: usbus2 usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus2 usbus0
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen2.3: <vendor 0x0424 product 0x2660> at usbus2
uhub5 on uhub3
uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus2
Root mount waiting for: usbus2
uhub5: 2 ports with 1 removable, self powered
lo0: link state changed to UP
Link state changed to up
igb1: link state changed to UP
Link state changed to up
igb0: link state changed to UP